Cab Height

77"

New Holland TZ & Case IH DX 18–25 Hardtop Cab 11358

Turn your New Holland TZ or Case IH DX sub-compact tractor into a better cold-weather work machine with Original Tractor Cab Hardtop Cab 11358.

Rain, snow, sleet, and cold wind can make tractor work hard. However, the work does not stop when the weather turns bad. So, Cab 11358 adds a full enclosure around the operator to help block foul weather.

This hardtop tractor cab fits select New Holland TZ and Case IH DX tractors. In addition, the cab uses a strong steel tube frame, durable vinyl enclosure, clear windows, hinged doors, a hard ABS roof, and a glass windshield with a manual wiper.

Best of all, the mounting system uses existing points on the tractor. Therefore, you do not need to drill holes in your tractor to install the cab.

Cab 11358 is made for specific tractors. It is not a loose universal tractor enclosure.

Buy the New Holland TZ & Case IH DX Hardtop Cab 11358 direct from Original Tractor Cab.

Original Tractor Cab 11358 for New Holland TZ and Case IH DX Tractors

A small tractor can work all year.

You may mow during warm weather. Then, fall brings leaves, dirt, and property work. Winter can bring snow, ice, cold wind, and wet ground.

Yet an open tractor leaves the operator exposed.

Cab 11358 helps change that.

The enclosure creates a barrier between you and the weather. Meanwhile, its clear windows help you keep a good view around the tractor.

As a result, your New Holland or Case IH tractor can remain useful when winter arrives.

Cab 11358 Exact Tractor Fitment

Correct fit matters.

Original Tractor Cab Hardtop Cab 11358 fits the New Holland TZ18DA, TZ22DA, TZ24DA, and TZ25DA.

The same cab also fits the Case IH DX18E, DX22E, DX24E, and DX25E.

Dealer fitment data confirms all eight applications for OT-11358.

Therefore, you should not select this cab by tractor color or horsepower alone.

Check the full model number before ordering. Also, remember that prior owners may have changed or added equipment.

If you are unsure about your tractor, use the Original Tractor Cab contact page before you order.

Fully Enclosed Hardtop Tractor Cab

Bad weather can reach a tractor operator from every side.

Rain may blow in from the front. Likewise, snow can swirl around the operator. Cold wind can enter from either side or from behind.

Therefore, Cab 11358 surrounds the operator area instead of adding only a roof or windshield.

The cab has a hard ABS plastic roof. Clear panels cover much of the sides and rear. Meanwhile, the glass windshield protects the front of the operator area.

That full enclosure makes Cab 11358 a useful upgrade for winter tractor work.

Protection From Rain, Snow, Sleet, and Cold Wind

Winter work can be tough on an open tractor.

Cold wind makes low temperatures feel even colder. Likewise, blowing snow can hit the operator while clearing a driveway or lane.

Cab 11358 helps reduce direct exposure to that weather.

Wiedmann Bros. describes the enclosure as protection from wind, blowing snow, rain, and sleet.

So, the cab can be useful for snow removal, property care, farm chores, loader work, and other cold-weather jobs.

Still, this is a weather enclosure. It is not a sealed automotive cab.

Strong 16-Gauge Steel Tube Frame

A good enclosure needs a strong frame.

For that reason, Cab 11358 uses 16-gauge steel tubing.

The frame supports the hard roof and enclosure around the operator. In addition, it gives the cab its shape and provides mounting points for the doors and panels.

Dealer product information confirms the 16-gauge steel tube construction.

Therefore, Cab 11358 is much more than a loose vinyl tractor cover.

It is a structured aftermarket tractor cab made for specific New Holland and Case IH machines.

Durable Rip-Stop Vinyl Cab Material

Outdoor equipment works in a hard setting.

Dirt, water, sun, cold, and changing weather are part of tractor life.

So, cab material needs to handle outdoor use.

Dealer information describes the Cab 11358 enclosure material as a strong yet lightweight rip-stop vinyl fabric. It also identifies resistance to abrasion, water, mildew, and rot.

That material forms much of the weather barrier around the operator.

Meanwhile, clear window areas help maintain the view needed for tractor work.

Molded ABS Hardtop Roof

Cab 11358 uses a solid ABS plastic roof.

That hardtop gives the operator overhead weather coverage.

Therefore, falling rain and snow meet a solid barrier above the seat.

The hardtop also gives Cab 11358 a more finished form than a simple soft canopy.

For tractor owners who work in winter, that overhead coverage can make the enclosure much more useful.

Glass Windshield and Manual Wiper Included

The windshield is one of the strongest features of Cab 11358.

Dealer information for OT-11358 states that this cab includes a glass windshield and a manual windshield wiper.

That matters during wet and snowy work.

Rain can cover the front glass. Likewise, wet snow can reduce the operator's view.

The manual wiper gives you a simple way to clear the windshield without adding an electric wiper motor.

Therefore, buyers do not have to start with the standard plastic front windshield found on some other Original Tractor Cab models.

Clear Lexan Side and Rear Windows

Visibility still matters around the rest of the tractor.

For that reason, Cab 11358 uses clear, shatter-resistant Lexan material in the side doors and rear curtain.

The clear panels help you see the work area around the tractor.

That view matters while backing up, working around buildings, using attachments, or operating near other objects.

So, weather coverage does not have to mean losing your view.

Hinged Doors for Easy Entry and Exit

Getting into a tractor cab should be simple.

Cab 11358 uses hinged doors with latches.

Open the door, enter the tractor, and close it behind you.

Dealer information also states that the doors can be removed for summer use.

That feature makes the cab more useful as the seasons change.

Winter may call for a full enclosure. However, warm weather may call for a more open operator station.

Remove the Doors for Warm Weather

You do not always need a fully enclosed tractor.

As temperatures rise, removable doors give you another choice.

Take the doors off as directed, and you can create a more open operator area.

Therefore, Cab 11358 does not have to be only a winter accessory.

The removable design can make seasonal changes easier.

No Drilling Required

Many tractor owners do not want to drill holes in their equipment.

Cab 11358 avoids that problem.

Dealer installation information states that the enclosure mounts using existing holes. Therefore, no drilling is required when the cab is installed as designed on a compatible tractor.

That is a major benefit for a direct-to-consumer product.

You can add a model-specific cab without making unnecessary drilled mounting holes in your tractor.

Cab 11358 Installation Time

Plan on about three to four hours for normal installation.

Dealer information gives a 3–4 hour installation estimate for Cab 11358.

Do not rush the job.

First, identify the parts. Next, read the instructions. Then, assemble the frame and enclosure as directed.

Correct installation matters for fit and safe use.

You can also check the Original Tractor Cab installation manuals page for available instructions and support.

Cab Removal Takes About 45 Minutes

The cab can also come off.

Dealer information estimates removal at about 45 minutes.

That can be useful for owners who want the enclosure mainly during cold weather.

For example, you may install the cab before winter. Then, you can remove it when warm weather returns.

As a result, Cab 11358 can work as a seasonal tractor upgrade.

Cab 11358 Installed Height

Adding a cab makes your tractor taller.

Original Tractor Cab currently lists the installed Cab 11358 height at about 77 inches.

That number matters.

A tractor that once passed under a garage door or tree limb may have less clearance after the cab goes on.

Therefore, measure your finished tractor after installation.

Check sheds, barns, garages, trailers, low branches, and all other overhead objects before driving under them.

Tire size and tractor setup may affect actual height. So, use 77 inches as product guidance and confirm the height of your own machine.

Cab Accessories for More Cold-Weather Comfort

Some owners may want more than the standard cab.

Dealer information lists several related Original Tractor Cab accessories with the 11358 product. These include an electric wiper option, rear mirror kit, LED work light kit, and 12-volt ceramic heater/fan.

Compatibility can vary.

Therefore, check the requirements for each accessory before you order.

You can browse current choices in the Original Tractor Cab accessories collection.

Why Buy Cab 11358 Direct From Original Tractor Cab?

When you buy direct, you buy from the company that makes the cab.

That gives you a direct path to product information.

In addition, you can ask about fit, installation, replacement parts, and compatible accessories.

Dealer listings have served Original Tractor Cab customers for years. However, direct online sales give customers another way to get the same Original Tractor Cab products.

You can also browse the Original Tractor Cab New Holland collection for other compatible New Holland cab and sunshade products.

New Holland TZ18DA, TZ22DA, TZ24DA & TZ25DA Tractor Specifications

The New Holland TZ-DA family belongs to New Holland's earlier Boomer sub-compact tractor line.

These were small diesel tractors made for property work, mowing, loader use, snow removal, and other jobs.

New Holland still recognizes the TZ-DA family in its official prior-model resources. The manufacturer lists the Boomer TZ-DA Series as a prior compact tractor family and provides archived material for the TZ18DA, TZ22DA, and TZ25DA.

For manufacturer information on legacy machines, visit the official New Holland Prior Model Resources.

You can also see the manufacturer's current New Holland compact tractor range.

New Holland TZ18DA Specifications

The New Holland TZ18DA is a sub-compact utility tractor from the Boomer TZ Series.

It uses a 1.0-liter, three-cylinder, liquid-cooled Shibaura diesel engine.

Gross engine output is 18 horsepower. Meanwhile, claimed PTO output is about 13.7 horsepower.

The tractor uses four-wheel drive, power steering, wet disc brakes, and a hydrostatic transmission.

Therefore, the TZ18DA packs useful tractor features into a small machine.

TZ18DA Hydraulics and Hitch

The TZ18DA uses an open-center hydraulic system.

Pump flow is listed at about 3.75 gallons per minute, while total hydraulic flow is about 5.6 gallons per minute.

The tractor also uses a Category I rear three-point hitch.

Rear lift capacity at 24 inches is about 700 pounds.

So, this small tractor can handle a useful range of compatible property-care tools.

New Holland TZ22DA Specifications

The New Holland TZ22DA increases engine output to 22 gross horsepower.

Its 1.0-liter Shibaura diesel has three cylinders and liquid cooling. Claimed PTO power is about 17 horsepower.

Like the TZ18DA, the TZ22DA uses hydrostatic drive.

Four-wheel drive also comes with the basic tractor design.

Power steering and wet disc brakes help make the machine easy to use.

TZ22DA Transmission and Fuel

The hydrostatic transmission gives the operator infinite forward and reverse speed control within its ranges.

Fuel capacity is about 7.9 gallons.

That combination suits work that needs frequent speed and direction changes.

Loader work is one example. Snow removal is another.

Therefore, adding Cab 11358 can make sense for owners who use the TZ22DA during winter.

New Holland TZ24DA Specifications

The New Holland TZ24DA raises gross engine output to 24 horsepower.

It uses a three-cylinder Shibaura diesel with about 1.0 liter of displacement. Claimed PTO power is about 18 horsepower.

The TZ24DA also uses hydrostatic drive, four-wheel drive, power steering, and wet disc brakes.

Fuel capacity is about 7.9 gallons.

TZ24DA Hydraulic and Three-Point Capacity

The TZ24DA uses an open-center hydraulic system.

Pump flow is about 3.75 gallons per minute. Total hydraulic flow is about 5.6 gallons per minute.

Its Category I three-point hitch has a listed rear lift capacity of about 700 pounds at 24 inches.

The tractor also offers rear and mid PTO capability.

That makes it useful with many types of compact equipment.

New Holland TZ25DA Specifications

The TZ25DA sits at the upper end of this small TZ cab application group.

It carries a 25-horsepower model designation and followed the earlier TZ24DA in the Boomer TZ family. Historical reference material places the TZ25DA in the 2005–2008 period.

As with the other tractors on this page, exact specifications can vary with year, tires, attachments, and equipment.

Therefore, use the operator manual and serial information from your exact tractor when a service or safety specification matters.

Why Cab 11358 Works Well With the New Holland TZ Series

The TZ tractors were made to do many jobs.

That means an owner may use the same tractor during summer and winter.

A mower can come off in fall. Then, snow equipment or a loader may go on.

Yet the open operator station does not change when winter arrives.

Cab 11358 does.

It adds a hard roof, glass front windshield, clear side and rear panels, and doors around the operator.

Therefore, owners can add weather protection to a tractor they already know and use.

Case IH DX18E, DX22E, DX24E & DX25E Cab Fitment

Original Tractor Cab 11358 also fits a group of Case IH DX tractors.

Verified dealer fitment includes the Case IH DX18E, DX22E, DX24E, and DX25E.

These machines share close ties with the New Holland TZ tractors of the same era.

For example, historical tractor references identify the Case IH Farmall DX22E as the related model to the New Holland TZ22DA. Likewise, the DX24E is identified as the related Case IH model for the TZ24DA.

That shared platform helps explain why Cab 11358 serves both equipment brands.

Check Your Case IH Model Before Ordering

Do not order Cab 11358 just because your tractor says Case IH.

The model number matters.

Dealer information specifically lists DX18E, DX22E, DX24E, and DX25E for OT-11358.

A separate 11358C product also appears in dealer catalogs for other Case IH applications.

Therefore, confirm the full model before purchase.

This simple step can prevent a costly fitment mistake.

A Cab for Year-Round Sub-Compact Tractor Use

Small tractors often do more jobs than their size suggests.

They mow, move material, maintain property, and clear snow.

So, a cab can make the tractor more useful during bad weather.

Cab 11358 does not change the basic tractor.

Instead, it adds weather coverage around the operator.

The glass windshield and manual wiper help during wet work. Meanwhile, the hard roof and enclosure help reduce direct exposure to rain, sleet, snow, and cold wind.

As a result, an older New Holland TZ or Case IH DX can remain a useful winter work machine.

The History of Original Tractor Cab Company

Original Tractor Cab Co., Inc. traces its roots to 1939.

The company began with a practical need.

Farmer Stanley Williams wanted better protection from the weather while using a tractor. So, he developed a cab for his own use.

Other farmers soon saw value in the idea.

Demand grew, and the farm solution became a business.

Today, Original Tractor Cab continues to make cabs, sunshades, and outdoor equipment accessories. Historical industry material also identifies the company as producing cabs, sunshades, and accessories since 1939.

Born From a Need on the Farm

Stanley Williams understood outdoor work because he did it.

Rain, snow, wind, sun, and cold were part of farm life.

Therefore, better operator weather coverage had clear value.

Other farmers faced the same problem.

As interest grew, Original Tractor Cab began its long path as an American manufacturer.

The basic idea was simple then.

It is still simple today.

Make useful products for people who work outdoors.

More Than Eight Decades of Manufacturing

Equipment has changed a great deal since 1939.

Tractors became smaller, faster, and more specialized. Lawn and garden tractors became common. Zero-turn mowers changed grounds care. Snow equipment also created new needs.

Original Tractor Cab changed with those machines.

The company's product range grew to include hardtop cabs, soft enclosures, tractor sunshades, mower sunshades, snow equipment cabs, and related accessories.

Yet weather remains the same problem.

People still work in rain, snow, wind, cold, and direct sun.

Therefore, operator weather products still serve the same basic need.

Original Tractor Cab in Arlington, Indiana

Original Tractor Cab is based in Arlington, Indiana.

The current company contact page lists the business at 6849 W Front Street in Arlington.

Industry material also identifies Original Tractor Cab in Arlington and describes the company as a maker of hardtop cabs, sunshades, and snow cabs.

Cab 11358 is part of that manufacturing history.

It takes the same basic idea behind early tractor weather protection and applies it to the New Holland TZ and Case IH DX sub-compact tractors.

Frequently Asked Questions About Cab 11358

What New Holland tractors fit Cab 11358?

Original Tractor Cab 11358 fits the New Holland TZ18DA, TZ22DA, TZ24DA, and TZ25DA. Dealer fitment information confirms all four models.

What Case IH tractors fit Cab 11358?

Cab 11358 fits the Case IH DX18E, DX22E, DX24E, and DX25E.

Does Cab 11358 require drilling?

No. Dealer installation information states that Cab 11358 uses existing mounting holes, so drilling is not required when the cab is installed as designed.

Does Cab 11358 include a glass windshield?

Yes. Cab 11358 includes a glass windshield.

Does the cab include a windshield wiper?

Yes. The glass windshield comes with a manual wiper according to dealer product information.

What are the side and rear windows made from?

Clear, shatter-resistant Lexan is used for the side doors and rear curtain.

Does Cab 11358 have a hard roof?

Yes. The fully enclosed cab uses an ABS plastic hardtop.

How long does installation take?

Plan on about three to four hours for normal installation.

How long does cab removal take?

Dealer information estimates about 45 minutes for removal.

Can the doors be removed during summer?

Yes. Dealer product information states that the hinged doors can be removed for summer use.

How tall is the tractor after Cab 11358 is installed?

Original Tractor Cab currently lists the cab height at about 77 inches. Actual finished height can vary with tractor setup, so measure your machine after installation.

Is Cab 11358 a genuine New Holland or Case IH factory cab?

No. Original Tractor Cab Co., Inc. makes Cab 11358 as an aftermarket enclosure for compatible New Holland and Case IH tractors.

Does Cab 11358 provide rollover protection?

No. Cab 11358 is a foul-weather enclosure. It is not a ROPS, FOPS, rollover protection device, or falling-object protection device.

California Proposition 65 Warning

WARNING: Cancer and Reproductive Harm.

California Proposition 65 requires warnings when a product can expose a person to chemicals that California lists as causing cancer, birth defects, or other reproductive harm.

Original Tractor Cab should display the current product-specific Proposition 65 warning that applies to the actual materials and expected chemical exposures associated with Cab 11358. The warning used at the point of sale should match the current California requirements for the applicable listed chemical or chemicals.

This general notice should not replace a product-specific safe-harbor warning when California law requires one.

Important Non-OEM and Liability Disclaimer

This is an aftermarket product produced by Original Tractor Cab Co., Inc. It is not a genuine New Holland, Case IH, or CNH OEM cab. It is not a factory-installed New Holland or Case IH operator enclosure.

Cab 11358 is designed to provide foul-weather protection from conditions such as rain, snow, sleet, and cold wind. It does not provide protection from noise, exhaust fumes, chemicals, rollover, collision, falling objects, flying debris, or other accidents.

Cab 11358 is not a ROPS, FOPS, rollover protection device, falling-object protection device, collision protection system, or substitute for factory safety equipment.

Never alter, drill, cut, weld, remove, bypass, or defeat the tractor manufacturer's ROPS, seat belt, guards, shields, interlocks, or other factory safety systems to install or use this cab.

Install Cab 11358 only as directed by Original Tractor Cab. Also, follow all New Holland or Case IH operating instructions, safety warnings, and maintenance requirements.

Remember that adding the cab increases the tractor's overall height. Therefore, check garage doors, barns, trailers, tree limbs, buildings, and all other overhead obstacles before operating the tractor.

The operator remains responsible for safe tractor operation, correct cab installation, adequate ventilation, inspection of mounting hardware, overhead clearance, safe transport, and confirmation that Cab 11358 is compatible with the tractor before use.

New Holland and Case IH are trademarks of their respective owners. Original Tractor Cab Co., Inc. is an independent aftermarket manufacturer and is not affiliated with or endorsed by New Holland, Case IH, or CNH.