Expertly designed to fit Ariens 2-Stage Blowers from 2011 to present, our newly designed Original Tractor Cab offers a sleek and modern look to your outdoor equipment. With a curved frame and clear vinyl, this sturdy cab provides the ultimate view and comes with a two year limited warranty. Easily clean the fabric with warm water, and the windows with mild dish soap and be sure to use a soft cloth. DO NOT USE BLEACH when Cleaning the Fabric please use a sponge or damp cloth with clean warm water to wipe the surface and line or air dry.
Ariens Two-Stage Snowblower Cab 20230
for 2011–2024 Models
Snow can blow in your face as you clear a drive.
Cold wind can make the job feel long. Yet the
snow still needs to go. So, our Ariens Snowblower
Cab 20230 helps shield you from snow and wind
while you work.
Original Tractor Cab makes this snow cab for
select Ariens two-stage walk-behind snowblowers
from 2011 through 2024. The new curved frame
gives the cab a neat look. Plus, the clear
vinyl helps you see the path ahead.
This cab adds a weather shield near the
snowblower handles. It can help block
snow, sleet and cold wind. Also, the
flexible clear panels let you watch
the work area.
Ariens Snowblower Cab 20230 Product Details
Product Number: 20230.
Product Type: Walk-behind snowblower weather cab.
Machine Fit: Select Ariens two-stage snowblowers.
Model Years: 2011 through 2024; confirm fit for each machine.
Cab Design: Curved frame with clear vinyl enclosure.
Frame: Sturdy support frame.
Windows: Clear flexible vinyl.
Care: Warm water, mild dish soap and a soft cloth.
Warranty: Two-year limited warranty.
Manufacturer: Original Tractor Cab Co., Inc.
The cab is an aftermarket weather cover.
It is not an Ariens factory cab. So,
check your snowblower model and
controls before you order.
All-Weather Snowblower Cab Protection for Ariens
Keep More Blowing Snow Off Your Face
A snowblower can send snow far from
your drive. Yet the wind may blow
some of it right back at you.
So, Cab 20230 adds a clear
shield near the handles.
The front panel helps block
blowing snow. Also, the
side panels help cut
snow that blows in
from an angle.
You can still see the
path through the clear
vinyl. Yet snow may
enter through open
parts of the cab.
Cold Wind Protection for Winter Work
Cold wind can make your
hands and face feel numb.
So, the snow cab helps
block direct wind near
the operator.
The flexible panels form
a shield around the
front and sides.
Plus, the curved
frame helps hold
the cover in place.
However, this cab has
no heat. Dress for
the cold and
take breaks
when you need them.
Rain and Sleet Protection
Winter storms may bring
sleet or wet snow.
So, a clear weather
cover can help
block some of
that harsh weather.
The vinyl helps shield
your face and upper
body. Yet this cab
is not a sealed
waterproof room.
Clear Views During Snow Removal
A good view helps you
steer near cars,
walks and lawn edges.
So, Cab 20230 uses
clear vinyl panels.
The clear material lets
you see much of
the path ahead.
Also, you can
watch the snow
as it leaves
the chute.
Snow and frost may
still build up
on the vinyl.
So, stop and
clean the panel
when your view
is not clear.
Know the Limits of Snow Cab Protection
A weather cab can
help block snow,
sleet and wind.
Yet it cannot
make a storm safe.
Ice, stones and
other hard objects
may fly from
the snowblower.
So, keep people
clear of the
discharge area.
The cab does not
protect against
thrown debris,
moving parts
or collisions.
Also, stop work
if high wind
or poor sight
makes the job unsafe.
Ariens Snowblower Cab 20230 Features
New Curved Frame Design
Cab 20230 has
a curved
frame design.
It gives
the snow cab
a smooth look.
The frame
helps hold
the clear
cover near
the handles.
So, it
forms a
shield between
the operator
and blowing snow.
Clear Flexible Vinyl Panels
Clear vinyl
helps keep
the work
area in view.
So, you
can watch
the snowblower
as you work.
The flexible
material helps
block snow
and cold wind.
Yet it
is not
a hard
safety window.
Sturdy Frame for Winter Use
The cab
has a
firm support
frame. It
helps keep
the cover
in shape
during normal use.
Also, the
frame helps
hold the
panels near
the snowblower
handles. Still,
check the
mounts before
each use.
Two-Year Limited Warranty
Original Tractor Cab
lists a
two-year limited
warranty for
Cab 20230.
So, review
the full
warranty terms
before you buy.
The warranty
does not
make the
cab a
safety guard.
It remains
a weather
cover for
the operator.
Made for Ariens Two-Stage Snowblowers
Cab 20230
serves select
Ariens two-stage
snowblowers from
2011 through 2024.
So, owners
can add
weather cover
to a
machine they
already use.
Yet Ariens
made many
models in
those years.
Check the
full model
number before
you order.
Ariens 2011–2024 Two-Stage Snowblower Cab Fit
Check Your Ariens Model Number
A year
alone does
not prove
cab fit.
So, find
the full
Ariens model
and serial
number first.
Then, compare
your snowblower
with the
Cab 20230
installation guide.
Also, check
the handle
and control
layout.
Two-Stage Snowblower Design
A two-stage
snowblower uses
an auger
and an impeller.
First, the
auger moves
snow toward
the center.
Then, the
impeller sends
the snow
out through
the chute.
So, these
machines can
clear deep
snow with
the right setup.
Check the Snowblower Handle Shape
Cab 20230
mounts near
the handle
area. So,
handle shape
can affect
the fit.
Added lights,
controls and
other parts
may also
need room.
Therefore, check
all parts
before installation.
Keep All Snowblower Controls Clear
A snowblower
has drive,
auger and
chute controls.
So, the
cab must
not block
safe use
of those controls.
Also, make
sure you
can see
the work
area and
move your
hands with ease.
Do Not Buy by Year Alone
Ariens made
many two-stage
machines from
2011 through 2024.
Some use
tracks, while
others use
wheels.
Handle and
control layouts
can vary.
So, confirm
Cab 20230
fit for
your exact
machine before purchase.
Ariens Snowblower Cab 20230 Installation and Care
Read the Cab Installation Guide
Start with
the full
Cab 20230
guide. Then,
lay out
the frame,
cover and
hardware.
Follow each
mount step
in order.
Also, check
the handle
and control
clearance before use.
Find the
Ariens Snowblower Cab 20230 installation manual
in our
manual library.
Check Frame and Mount Hardware
Loose hardware
can cause
wear. So,
check the
cab frame
and mounts
from time
to time.
Keep the
frame clear
of hot
engine parts.
Also, make
sure it
does not
block the
chute or controls.
Clean the Fabric with Warm Water
Dirt and
road salt
can build
up on
the cab.
So, clean
the fabric
with warm water.
Use a
sponge or
damp cloth.
Then, let
the fabric
air dry.
Do Not Use Bleach
Bleach can
harm the
cab fabric.
So, do
not use
bleach for cleaning.
Instead, use
clean warm
water and
a soft
sponge or cloth.
Clean Clear Vinyl Windows
Grit can
scratch clear
vinyl. So,
rinse off
loose dirt
before you wipe.
Use mild
dish soap
and a
soft cloth.
Also, avoid
rough brushes
and harsh cleaners.
Store the Cab with Care
A clean
and dry
cab will
store better.
So, let
the cover
dry before
you put
it away.
Keep sharp
tools away
from the
clear panels.
Also, avoid
tight folds
that may
crease the vinyl.
Open Trailer Transport
High wind
during transport
can harm
soft cab
panels. So,
follow the
product guide
before hauling
the snowblower.
Remove the
cover when
the guide
directs you
to do so.
Then, store
it in
a safe place.
Buy Ariens Snowblower Cab 20230 Direct
Original Tractor Cab
makes Cab 20230
for select
Ariens two-stage
snowblowers. So,
you can
buy direct
from the maker.
Our team
can help
with cab
fit and
setup questions.
Plus, you
can find
more snowblower
weather covers
on our site.
Browse our
Ariens snowblower cabs and weather enclosures
for more
model-fit choices.
If you
own an
older Ariens
snowblower, see
our
Ariens 2001–2010 Snowblower Cab 20123
.
You can
also view
the
Ariens Two-Stage Snow Cab 20180
for another
snow cab choice.
Check the
exact fit
before purchase.
Ready for
more cover
from snow,
sleet and wind?
Choose Cab 20230
and order
direct from
Original Tractor Cab.
Ariens Two-Stage Snowblower Specifications for 2011–2024 Models
Ariens makes two-stage snowblowers for
deep snow and winter work. Yet the
2011–2024 range covers many machines.
So, there is no one engine, width
or weight for every model.
Engine size, snow width, drive type
and controls can change by model.
Also, older and newer snowblowers
may use different parts.
How an Ariens Two-Stage Snowblower Works
The front auger pulls snow
into the machine. Then,
an impeller throws the
snow through the chute.
This two-stage design can
help clear deep snow.
Yet snow type and
engine power affect
how fast you can work.
Ariens Deluxe 24 Snowblower Specifications
The Ariens Deluxe 24
is one model in
the two-stage family.
For example, model
921024 has a
24-inch clearing width.
Its Ariens AX engine
has 254 cc of
displacement. Also,
the model uses
a 120-volt
electric start.
The fuel tank holds
about 2.9 US quarts.
Plus, the machine
has a 20-watt
headlight.
Ariens Deluxe 24 Auger and Impeller
Ariens lists a
14-inch auger
for model 921024.
The impeller
also measures
14 inches.
So, these parts
help move snow
through the machine.
Yet they can
cause severe harm.
Never place
your hands
near the
auger or chute.
Shut off
the engine
before service.
Ariens Deluxe 24 Drive System
The Deluxe 24
model 921024
uses a
Disc-O-Matic
drive system.
It has
six forward
speeds and
two reverse speeds.
Also, the
model uses
Auto-Turn axle
control. So,
the operator
can steer
the machine
through turns.
Ariens Deluxe 24 Chute Controls
The chute
on model
921024 has
a 200-degree
rotation range.
So, the
operator can
aim snow
away from
the cleared path.
The machine
also has
an in-dash
chute deflector
lever. Yet
wind may
still blow
snow back
toward the operator.
Ariens Deluxe 28 Snowblower Specifications
Ariens Deluxe 28
model 921030
has a
28-inch clearing width.
So, it
clears a
wider path
than the
Deluxe 24.
The model
uses an
Ariens AX
engine and
a two-stage
snow system.
Also, it
has six
forward and
two reverse speeds.
Ariens Deluxe 30 Snowblower Specifications
The Deluxe 30
model 921032
has a
30-inch clearing width.
So, it
can clear
a wide
path in
one pass.
Ariens lists
a 306 cc
engine for
this model.
Plus, it
has a
14-inch auger
and impeller.
Ariens Deluxe 28 SHO Specifications
The Deluxe 28 SHO
model 921044
has a
28-inch clearing width.
It uses
a 306 cc
Ariens AX engine.
The model
also has
a 200-degree
chute rotation
range. So,
the operator
can aim
snow away
from the path.
Ariens Platinum 24 SHO EFI Specifications
The Ariens
Platinum 24 SHO EFI
model 921327
uses a
369 cc
Ariens AX engine.
It has
a 24-inch
clearing width.
The model
also uses
a 14-inch
auger and
impeller. Plus,
the drive
has six
forward and
two reverse speeds.
Ariens Platinum 24 SHO EFI Chute
The chute
has a
200-degree
rotation range.
Also, the
model uses
Quick Turn
chute control.
So, the
operator can
change the
snow path
as needed.
Yet always
watch where
the snow lands.
Ariens Snowblower Clearing Widths
The 2011–2024
Ariens two-stage
family includes
many clearing widths.
For example,
Deluxe models
may use
24-, 28-
or 30-inch
snow housings.
So, check
the full
model number
for the
correct width.
Cab 20230
fit must
also be
checked on
that machine.
Ariens Snowblower Tires and Tracks
Some Ariens
snowblowers use
tires. Others
use tracks
for traction.
So, the
ground drive
setup can vary.
The tires
or tracks
help move
the machine
through snow.
Yet the
cab must
still fit
the handle
and control layout.
Ariens Snowblower Weight and Size
Ariens lists
Deluxe 24
model 921024
at about
229 pounds.
The machine
is about
55.4 inches long.
The listed
height is
about 44.5 inches
before cab
installation. So,
measure the
full machine
after you
add Cab 20230.
Official Ariens Two-Stage Snowblower Specifications
Ariens gives
engine, drive,
auger, chute
and size
data in
its manuals.
So, review
the
official Ariens Deluxe Series operator manual
for models
921024, 921030,
921032 and 921044.
For a
Platinum model
example, see
the
official Ariens Platinum 24 SHO EFI manual
.
Always match
the manual
to the
exact machine.
The History of Original Tractor Cab Company Since 1939
Stanley Williams Had an Idea in 1939
Original Tractor Cab
began in
1939. At
that time,
farmer Stanley
Williams needed
more cover
from harsh weather.
So, he
made a
cab for
his own tractor.
The new
cab helped
shield him
from rain,
wind and cold.
Other farmers
soon saw
his idea.
They also
had to
work in
bad weather.
As a result,
they wanted
cabs of
their own.
That first
design became
the start
of Original
Tractor Cab Co., Inc.
From One Farm Cab to a Family Business
Stanley knew
how hard
farm work
could be.
He also
knew how
cold and
wet the
job could feel.
So, he
kept making
useful cab
designs. More
farmers saw
the value
of weather cover.
As demand grew,
the company
grew as well.
Yet its
main goal
stayed much
the same.
Help people
work with
less harsh
weather on
their bodies.
Original Tractor Cab During World War II
World War II
brought new
needs for
goods and supplies.
So, Original
Tractor Cab
changed its
work to
help the war effort.
The company
made backpacks
and other
needed military
goods. This
work showed
the range
of its
manufacturing skills.
After the war,
the company
went back
to making
weather covers
for farm
and outdoor work.
New Cabs for Walk-Behind Snowblowers
Outdoor machines
changed as
the years
went by.
Snowblowers became
more common
at homes
and businesses.
So, Original
Tractor Cab
added weather
covers for
walk-behind
snowblowers.
These cabs
helped block
snow and
wind near
the operator.
As a result,
more people
could use
the company's
weather cover
products during winter.
From Snowblower Cabs to Lawn Equipment
Lawn tractors
and mowers
also became
more common.
So, the
company added
more model-fit
weather products.
The product
range grew
beyond farm
tractor cabs.
Also, more
homeowners and
grounds crews
could add
weather cover.
Sunshades for Warm Weather Work
Cold weather
was not
the only concern.
Hot sun
could also
make long
days hard.
So, the
company added
sunshades to
its product range.
These shades
help block
direct sun
from above.
As a result,
Original Tractor Cab
could help
more operators
through the year.
Three Generations of American Manufacturing
The Williams
family carried
the company
forward through
three generations.
Each generation
brought new
ideas and products.
Yet the
core goal
stayed the same.
Make useful
weather covers
for people
who work outdoors.
Today, the
company makes
hardtop cabs,
soft enclosures,
sunshades and
cab parts.
Plus, its
products serve
many types
of outdoor equipment.
Made in Arlington, Indiana
Original Tractor Cab
is based
in Arlington,
Indiana. We
take pride
in our
long history
of American
manufacturing.
Our products
help farmers,
homeowners and
grounds crews
work with
more comfort.
So, we
keep making
weather covers
for the
machines they use.
Ariens Cab 20230 Carries on the Tradition
Modern Ariens
snowblowers came
long after
Stanley made
his first cab.
Yet the
need for
weather cover remains.
Snow still
blows back
toward the
operator. Cold
wind can
still make
work feel long.
So, Cab 20230
brings that
same basic
idea to
select Ariens
two-stage snowblowers.
Learn more
about our
family roots
on the
Original Tractor Cab company history page
.
Original Tractor Cab –
Made RIGHT in USA Since 1939!
Ariens Snowblower Cab 20230 Frequently Asked Questions
What snowblowers fit Cab 20230?
Cab 20230
fits select
Ariens two-stage
snowblowers from
2011 through 2024.
Check the
exact model
before you order.
Does Cab 20230 help block blowing snow?
Yes. The
clear vinyl
panels help
block snow
and cold wind.
Yet the
cab is
not fully sealed.
Does Cab 20230 have a curved frame?
Yes. The
new design
has a
curved frame.
It gives
the cab
a smooth look.
What type of windows does Cab 20230 use?
The cab
uses clear
flexible vinyl.
So, the
operator can
see the
work area
through the panels.
Does Cab 20230 have a warranty?
Yes. Original
Tractor Cab
lists a
two-year limited
warranty for
Cab 20230.
How do I clean the cab fabric?
Use clean
warm water
and a
soft sponge
or cloth.
Then, let
the fabric
air dry.
Can I use bleach on the cab?
No. Do
not use
bleach on
the fabric.
It may
harm the
cab material.
How do I clean the clear vinyl?
Use mild
dish soap
and a
soft cloth.
Also, rinse
away grit
before you wipe.
Is Cab 20230 waterproof?
No. The
cab helps
block snow,
sleet and wind.
Yet weather
may enter
through open areas.
Does the cab protect from flying debris?
No. Cab
20230 is
a weather
cover only.
It does
not protect
from stones,
ice or
other thrown objects.
Is Cab 20230 a genuine Ariens OEM cab?
No. Original
Tractor Cab
makes this
aftermarket
weather enclosure.
It is
not a
genuine Ariens
OEM item.
Order Ariens Two-Stage Snowblower Cab 20230 Direct
Snow and
cold wind
can make
a short
job feel long.
So, add
a clear
weather cab
to your snowblower.
Cab 20230
has a
curved frame,
clear vinyl
and a
two-year limited
warranty. Plus,
it helps
shield the
operator from
harsh winter weather.
If you
own a
compatible Ariens
two-stage snowblower,
choose Cab 20230
for more
weather cover.
Buy direct
from Original
Tractor Cab.
We make
our products
in the
USA and
have served
outdoor workers
since 1939.
Non-OEM, Safety and Liability Disclaimers
Aftermarket and Non-OEM Product Disclaimer
This is an aftermarket product produced
by Original Tractor Cab Co., Inc.
It is not a genuine Ariens OEM item.
Original Tractor Cab Co., Inc. is
not affiliated with, sponsored by
or endorsed by AriensCo.
Ariens, Sno-Thro, Deluxe, Platinum,
Professional and related model names
are trademarks or product names of
their respective owners. We use
those names only to identify
compatible equipment.
Operator Safety and Liability Disclaimer
This cab provides limited weather
protection only. It is not a
rollover protective structure
(ROPS), falling object protective
structure (FOPS), collision guard,
debris shield or certified safety cab.
This product will only help protect
from weather elements, not rollover,
collision, falling objects, flying
debris or other hazards. Never rely
on the cab to prevent injury or death.
Always follow the Ariens operator
manual and Original Tractor Cab
installation guide. Keep all factory
guards and safety devices in place.
Never remove or alter factory safety
equipment to install the cab.
A snowblower can throw ice, stones,
gravel and other hard objects.
So, keep people and pets clear
of the discharge area. Never place
a hand in the auger, impeller
or chute.
Shut off the engine and follow
the Ariens manual before you
clear a blockage or service
the machine. Never bypass
a factory safety control.
Engine exhaust contains harmful
gases, including carbon monoxide.
Never run the snowblower in a
closed or poorly ventilated area.
Stop use if exhaust fumes enter
the cab.
The cab may affect sight lines
and control access. So, check
all clearances before use.
Also, make sure the cab does
not block the drive, auger,
chute or other controls.
Follow the product guide before
transport on an open truck or
trailer. Remove soft panels
when the guide directs.
California Proposition 65 Warning
WARNING:
Cancer and Reproductive Harm.
www.P65Warnings.ca.gov
.
