Original Tractor Cab 10974 for Cub Cadet 3000 Series Garden Tractors

Cub Cadet built the 3000 Series as a line of strong garden tractors. Many owners still use these machines for mowing, hauling, snow removal, and other property work.

However, the standard open operator station leaves the driver exposed to bad weather. So, Original Tractor Cab designed Cab 10974 to surround much of that area with a practical weather enclosure.

The result is more cover for year-round work.

Made for the Cub Cadet 3000 Series GT

Cab 10974 is a model-fit hardtop enclosure for compatible Cub Cadet 3000 Series GT machines. Therefore, it is not a loose universal cab that simply hangs over the tractor.

The frame uses specific braces, feet, rear brackets, posts, crossbars, doors, and enclosure panels. Together, those parts place the cab around the normal operator station.

Always confirm your tractor before ordering.

Hardtop Roof for More Weather Coverage

The cab includes a molded plastic hardtop. Unlike a soft fabric roof, the hard top keeps a firm shape above the operator.

Therefore, the roof helps block direct rain, snow, sleet, and overhead sun. The rest of the enclosure then adds coverage around the front, sides, and rear.

This makes Cab 10974 useful in more than one season.

More Than a Simple Sunshade

A sunshade mainly covers the operator from above. Cab 10974 goes much further by surrounding much of the operator station.

As a result, the cab can help reduce the amount of cold wind and blowing snow that reaches the driver. Yet the enclosure is not sealed or heated.

Dress for the outdoor temperature.

Clear Windshield for a Wide Forward View

Good sight is vital when you run a garden tractor. So, Cab 10974 uses a clear windshield to help preserve the operator's forward view.

The windshield also slopes forward. This design helps reduce glare and contact with falling rain and snow.

Still, keep the windshield clean during every job.

Clear Sight During Snow Removal

Blowing snow can collect on any cab. Therefore, stop and clean the windshield if snow or ice begins to block your view.

Never keep driving simply because the tractor can still move. A clear view of the ground, attachment, and nearby objects is vital.

Slow down when winter weather gets worse.

Clear Side Doors and Rear Curtain

Cab 10974 uses clear material in key areas around the operator. That includes the doors, windshield, and rear viewing area.

As a result, the enclosure helps preserve sight to the sides and rear of the tractor. This matters when you back up, turn near a building, or watch an attachment.

Keep every viewing panel clean.

Shatter-Resistant Clear Material

The clear cab material is made for outdoor equipment use. It gives the operator a useful view while helping block direct weather.

However, clear cab material is not certified impact protection. Therefore, never rely on a window panel to stop rocks, sticks, ice, or other thrown objects.

Keep all factory equipment guards in place.

Hinged Doors Make Entry Easy

Cab 10974 includes right and left hinged doors. The doors use latches so the operator can enter, close the cab, and get back to work.

This design also makes the enclosure more useful during repeated winter jobs. Instead of climbing around a fixed side panel, you can use a normal door opening.

Check both doors before each use.

Keep the Door Path Clear

Older garden tractors often gain accessories over time. Therefore, make sure no added part blocks a cab door.

Each door must open and close without hitting a control or attachment. Also, the operator must have a clear way out of the cab.

Correct any problem before starting work.

Model-Fit Steel Cab Frame

A series of steel braces, posts, crossbars, feet, and brackets supports Cab 10974. The frame holds the roof and flexible enclosure around the operator area.

Because the frame is made for the 3000 Series GT platform, it can provide a cleaner fit than a loose universal enclosure.

Follow the current installation guide during assembly.

The Cab Frame Is Not a Safety Cage

Steel cab parts may look strong. However, the Cab 10974 frame is made to support a weather enclosure.

It does not provide certified rollover or falling-object protection. Likewise, it does not replace any factory tractor safety device.

Use the cab only for its intended purpose.

No Holes to Drill During Normal Installation

Cab 10974 mounts through existing points on the compatible tractor. Therefore, normal installation does not require drilling holes in the machine.

That helps owners preserve an older Cub Cadet while adding weather coverage. It also reduces the need for permanent tractor changes.

Never force a cab to fit the wrong machine.

Check an Older Tractor Before Installation

A Cub Cadet 3000 Series tractor may now be decades old. Previous owners may have changed the seat, fenders, controls, tires, engine parts, or other equipment.

So, inspect the tractor before installation. If its layout does not match the current Cab 10974 instructions, stop and confirm fit.

Do not modify safety parts to make the cab fit.

About Three to Four Hours for Normal Installation

A typical first installation takes about three to four hours. However, tractor condition, tools, and installer experience can change the time.

Therefore, allow enough time to work carefully. Read the complete guide before you start and identify all parts first.

Never rush cab assembly.

Check the Cab After Assembly

Once the cab is in place, sit in the normal operator position. Then, test the steering, pedals, brake, throttle, PTO control, deck controls, and other functions.

Nothing from Cab 10974 should block normal tractor operation. In addition, all doors should open and close as designed.

Fix any interference before starting the engine.

About 72 Inches to the Top of the Cab

Original Tractor Cab lists Cab 10974 at about 72 inches high when installed. Still, the true height can change with tires, tire pressure, and tractor setup.

Therefore, measure your completed tractor before driving through a low garage, shed, trailer, or doorway.

Allow extra room above the measured height.

Watch for Tree Limbs

The hardtop changes the highest point of the tractor. As a result, a branch that once cleared the open machine may strike the cab.

Look up before working under trees. Likewise, slow down near low doors, shelters, and other overhead objects.

Never guess at tight clearance.

Cab 10974 Helps Block Blowing Snow

Snow removal is one of the main reasons to add a garden tractor cab. A blade or snow thrower can put the operator outside for a long time in cold conditions.

Meanwhile, wind can send loose snow back toward the seat. Cab 10974 helps place a barrier between the driver and much of that blowing snow.

That can make winter work more comfortable.

Useful With Compatible Snow Equipment

Cub Cadet offered snow equipment for many of its garden tractors. Therefore, a 3000 Series machine can become a useful winter tool when equipped correctly.

However, cab fit does not prove attachment fit. Always check the exact tractor, cab, and snow attachment before using them together.

Never assume two accessories are compatible.

Cab 10974 Helps Reduce Cold Wind

Wind can make an open garden tractor feel much colder. So, the enclosure helps reduce direct wind around much of the operator station.

The cab is not airtight, though. Cold air can still enter through normal gaps and openings.

Wear clothing suited to the weather.

Weather Protection Without a Heater

Cab 10974 does not include a heater. Instead, its main job is to put a physical barrier between the operator and normal outdoor weather.

As a result, reduced wind can improve comfort even though the air inside the cab remains cold.

Take warm-up breaks when needed.

Rain Protection for Property Work

Light rain can arrive before a mowing or property job is complete. The hardtop, windshield, doors, and rear enclosure help reduce direct rain around the operator.

However, the cab is not a sealed waterproof room. Wind-driven rain can still enter through normal openings.

Stop work during unsafe storms.

Sleet and Freezing Weather

Sleet can strike an open operator station and coat surfaces with ice. Therefore, the enclosure can be useful during normal cold-weather work.

Still, freezing moisture can collect on the cab itself. Stop if ice blocks your view or affects a door.

Never operate with poor visibility.

Cab 10974 Is Not Certified Hail Protection

The hardtop provides overhead weather coverage. However, the roof is not a certified hail or falling-object protective structure.

So, seek proper shelter during severe hail, lightning, or high winds. Never remain outside simply because the tractor has a hardtop cab.

The enclosure is for normal foul-weather use.

Not a Rollover or Debris Protection Cab

Cab 10974 is a weather enclosure. It does not provide rollover, collision, debris, or falling-object protection.

Therefore, never treat the frame, roof, windshield, or doors as a protective cage. Follow every Cub Cadet safety rule for the tractor and attachment.

Weather protection and safety certification are not the same thing.

Keep People Clear of Active Attachments

Mower decks and snow equipment can throw objects. Likewise, rotating parts can cause severe injury.

Cab 10974 does not make those hazards safe. Therefore, keep bystanders away and leave all factory guards in place.

Stop the machine before servicing an attachment.

Keep Cab Material Away From Hot Parts

Garden tractor engines and exhaust systems become hot during use. So, inspect the cab to make sure no panel or other part touches a hot surface.

Also, check the enclosure after tractor service. A loose cab part should never rest against the muffler or engine.

Stop use if heat contact occurs.

Never Run the Tractor in a Closed Building

The cab does not protect the operator from carbon monoxide. Therefore, never run a gasoline engine in a closed garage, shed, or trailer.

Move the tractor outdoors before operating it as directed by Cub Cadet. Engine exhaust can cause severe injury or death.

Good ventilation is vital.

Care for the Clear Cab Panels

Dirt can scratch clear material if you rub it across the surface. So, rinse away loose grit before wiping a panel.

Then, use mild soap, clean water, and a soft cloth unless the current cab instructions state otherwise.

Good care helps maintain a clear view.

Inspect the Enclosure Each Season

Check the cab before winter begins. Look at the roof, frame, brackets, doors, latches, clear panels, and flexible material.

Next, inspect the mounting hardware. Replace worn or damaged parts before using the tractor.

A short inspection can prevent a larger problem.

Why Buy Cub Cadet Cab 10974 Direct From Original Tractor Cab?

Buying direct connects you with the company that makes Cab 10974. That matters when you own an older tractor and need help with fit or installation.

You can browse more Cub Cadet cabs and weather products for other Cub Cadet applications.

You can also compare our tractor cab enclosures for other lawn, garden, and compact tractor models.

Before assembly, review the Original Tractor Cab installation manuals for current product guidance.

If your tractor has been changed or you are unsure about fit, use our Original Tractor Cab contact page before ordering.

Cub Cadet 3000 Series Garden Tractor Specifications

The Cub Cadet 3000 Series covered a large group of premium garden tractors. Therefore, there is no single engine, horsepower rating, mower deck, or weight that applies to every machine.

Models changed through the years. However, the family included machines such as the 3165, 3184, 3185, 3186, 3204, 3205, 3206, 3208, 3225, 3235, 3240, GT 3100, GT 3200, GT 3204, and GT 3235.

Use the exact model and serial number for service work.

3000 Series Production Era

The 3000 Series appeared from the late 1990s into the following decade. Different models entered and left the line as Cub Cadet updated engines, decks, transmissions, and features.

For example, early models such as the 3165 date to the late 1990s. Later GT 3100 and GT 3200 machines continued into the 2000s.

That long run created many configurations.

Cub Cadet 3165

The Cub Cadet 3165 was one of the early 3000 Series garden tractors. Published data lists about 16 horsepower.

Mower configurations included a 48-inch deck, with some records also showing 54-inch deck applications.

Exact equipment can vary by tractor.

Cub Cadet 3184

The 3184 followed with about 18 horsepower. Published specifications commonly pair this model with a 44-inch mower deck.

That size gives the tractor a useful balance between mowing width and access around property obstacles.

Always confirm the actual deck on the machine.

Cub Cadet 3185 and 3186

The 3185 and 3186 also belong to the earlier 3000 Series family. Published ratings place both near 18 horsepower.

Depending on model and configuration, mower choices included decks around 48, 54, and even 60 inches across parts of the range.

Deck options changed by model.

Cub Cadet 3204

The Cub Cadet 3204 moved the series to about 20 horsepower in published specifications.

Mower configurations commonly include 44 and 48-inch decks. Therefore, the machine could handle broad lawn areas while retaining garden tractor size.

Production details vary by year.

Cub Cadet 3205

The 3205 is another 20-horsepower-class 3000 Series tractor. Published mower choices include 48, 54, and 60-inch decks.

A wide deck can reduce mowing time on open ground. However, larger decks also need more clearance around gates, trees, and buildings.

Know the full width before entering a tight space.

Cub Cadet 3206

Published information places the 3206 in the 20-to-22-horsepower range, depending on the source and production detail.

Mower deck choices included approximately 44, 48, and 54 inches. As with other older machines, exact equipment should be checked on the tractor.

Never order service parts from horsepower alone.

Cub Cadet 3208

The Cub Cadet 3208 is a 20-horsepower-class garden tractor. Published deck options include 44, 48, 54, and 60-inch configurations.

That broad deck range shows how Cub Cadet used the 3000 Series platform for different property needs.

The actual tractor setup remains the best guide.

Cub Cadet 3225

The 3225 increased published power to about 22 horsepower. Available mowing configurations included 48, 54, and 60-inch decks.

Therefore, this model could handle a large mowing path when equipped with the wider deck.

Attachments add to overall machine size.

Cub Cadet 3235

The Cub Cadet 3235 is one of the better-known 3000 Series models. Published specifications rate it near 23 horsepower.

Deck choices across its production include approximately 44, 48, 54, and 60 inches.

Exact specifications depend on production details.

Cub Cadet 3240

The 3240 was rated at about 22 horsepower. Like several other tractors in the series, it could work with multiple mower sizes.

Published deck choices include 44, 48, 54, and 60 inches. Therefore, owners could match the machine to different mowing needs.

Check the deck model before ordering parts.

Cub Cadet GT 3100

The later GT 3100 carried the 3000 Series idea forward. Published specifications rate the tractor near 23 horsepower.

Mower choices included roughly 44, 50, and 54-inch decks. As a result, the GT 3100 could serve both lawn and heavier garden tractor work.

Exact attachments vary.

Cub Cadet GT 3200

The GT 3200 sits near the upper end of the later 3000 Series family. Published data rates it at about 25 horsepower.

Depending on year and setup, deck choices included 50, 54, and 60-inch configurations.

This made the GT 3200 useful on larger properties.

Cub Cadet GT 3204

The GT 3204 was another later 3000 Series model. Published specifications place it at about 23 horsepower.

Deck choices included roughly 44, 48, and 54 inches. Therefore, owners could select a mowing width suited to their property.

Confirm the installed equipment on older machines.

Cub Cadet GT 3235

The later GT 3235 reached about 25 horsepower in published specifications. Available mower configurations included approximately 50, 54, and 60 inches.

A 60-inch deck gives the tractor a broad cutting path. However, it also makes the full machine much wider than the tractor alone.

Allow room around obstacles.

3000 Series Engine Choices

Cub Cadet used several engine configurations across the 3000 Series. Therefore, one engine description cannot accurately cover every tractor.

Kohler engines appeared in many models. Meanwhile, selected machines used other engine brands and cooling systems.

Always identify the actual engine before service.

Air-Cooled and Liquid-Cooled Engines

Many 3000 Series engines use air cooling. However, selected models used liquid-cooled engines.

That difference matters for maintenance. Therefore, follow the manual for the exact engine instead of applying one service plan to every 3000 Series tractor.

Keep all cooling areas clean.

Hydrostatic Drive

Hydrostatic drive is a key feature across the 3000 Series family. It gives the operator smooth control of travel speed without a normal manual gearbox.

That can be useful when mowing around obstacles. Likewise, it helps when changing direction during snow removal or other close work.

Always travel at a safe speed.

Why Hydrostatic Drive Helps During Snow Work

Snow removal often calls for repeated changes in speed and direction. Therefore, hydrostatic control can make a garden tractor easier to manage during a winter job.

However, ice can still cause a tractor to slide. Slow down and use approved traction equipment when conditions call for it.

Drive systems cannot remove winter hazards.

3000 Series Mower Deck Range

The 3000 Series used a broad range of mower decks. Published configurations across the family include approximately 44, 48, 50, 54, and 60 inches.

Some early model data also differs by year and attachment package. Therefore, the deck on the actual tractor should control parts and service decisions.

Deck size does not prove cab fit.

Large Decks for Large Properties

A 54 or 60-inch deck can cover open ground quickly. In contrast, a smaller deck can fit more easily around gates and landscape features.

The tractor model, terrain, and property layout should guide equipment choice. Likewise, mowing speed should match grass and ground conditions.

Slow down on rough terrain.

Garden Tractor Snow Removal

The 3000 Series was built as more than a basic lawn mower. Compatible tractors could take on seasonal property work with the correct equipment.

Snow blades and snow throwers can turn a garden tractor into a useful winter machine. Cab 10974 then adds weather coverage around the operator.

Confirm each attachment before use.

Use the Correct Ballast

Front snow equipment can change tractor balance. Therefore, use the ballast and traction setup called for by the equipment maker.

Too little rear weight can reduce traction. Yet too much or poorly placed weight can also affect safe handling.

Stay within all tractor limits.

Tire Chains and Winter Traction

Some owners use compatible tire chains during winter. Chains can improve grip on snow and ice when the tractor maker allows them.

However, chains add material around the tire. So, check clearance from the cab frame, fenders, and other parts.

Stop use if a chain can strike the cab.

Slow Down on Ice

Extra traction does not make ice harmless. A garden tractor can still slide, especially while turning or working on a grade.

Therefore, reduce speed and avoid unsafe slopes. Keep attachments low when their instructions call for it.

Safe control matters more than speed.

Older 3000 Series Tractors Need a Fit Check

Age matters when buying an accessory for a used tractor. A 3000 Series machine may now have replacement parts that differ from its original setup.

For example, a prior owner may have changed the seat, tires, body panels, controls, or engine-related parts.

Inspect the actual tractor before ordering Cab 10974.

Use the Model and Serial Number

The full model and serial number help identify an older Cub Cadet. Therefore, record both before ordering tractor parts or checking factory information.

Cub Cadet also advises owners to use the product identification label when finding the correct parts for older equipment.

Good identification helps prevent costly mistakes.

Official Cub Cadet Support

The 3000 Series contains many models and production changes. Therefore, exact engine, deck, transmission, attachment, and service data should come from the manual for your tractor.

For current manufacturer information, visit the official Cub Cadet website.

For manuals and support information, use the official Cub Cadet service and parts resource.

The History of Original Tractor Cab Company

Original Tractor Cab began in 1939. At that time, Indiana farmer Stanley Williams needed better protection from bad weather while working on his tractor.

So, Stanley built a cab for his own use. Other farmers soon saw his idea and wanted similar weather protection.

A practical farm solution began to grow into a business.

Born From a Real Farm Need

Farm work did not stop because the day was cold or wet. Rain, wind, snow, sun, and changing weather were part of the job.

Therefore, Stanley's cab addressed a problem he knew firsthand. The design placed a barrier between the operator and much of the weather.

Other farmers quickly understood its value.

From One Tractor Cab to a Growing Company

Interest in Stanley's cab began to spread. Then, a small farm magazine ad helped the idea reach more tractor owners.

The response showed that the need extended far beyond one farm. As a result, the cab became the foundation of an American manufacturing company.

Original Tractor Cab traces its start to 1939.

Practical Products for People Who Work Outdoors

The early business grew around a simple idea. Make useful weather products for people who spend time outside.

That goal remained important even as tractors changed. Therefore, Original Tractor Cab continued to adapt its products to new equipment.

Real work continued to guide product design.

Original Tractor Cab During World War II

World War II changed the young company's work. During the war, normal tractor cab production gave way to manufacturing that supported the military.

The company made backpacks and other needed goods for the war effort. Afterward, Original Tractor Cab returned its attention to outdoor equipment.

Its manufacturing experience continued to grow.

New Equipment Brings New Cab Designs

Outdoor power equipment changed greatly after the war. Lawn tractors, garden tractors, snowblowers, compact tractors, and new mower designs became common.

So, Original Tractor Cab expanded beyond its early farm tractor products. Different machines called for different forms of operator weather protection.

The product line grew with the equipment market.

Snowblower Cabs Expand the Product Line

The Williams family continued to develop new ideas. Walk-behind snowblower operators faced cold wind and blowing snow during almost every winter job.

Therefore, the next generation developed a snowblower cab to help address that problem. This moved Original Tractor Cab into another part of the outdoor power equipment market.

Lawn and garden products followed.

Lawn and Garden Tractor Weather Protection

Garden tractors became stronger and more useful. Owners could mow in summer and move snow in winter with the same basic machine.

As a result, weather enclosures became useful on smaller tractors too. Original Tractor Cab developed products for many lawn and garden tractor platforms.

Cab 10974 grew from that long product history.

Sunshades Add Warm-Weather Protection

Cold was not the only problem faced by outdoor equipment operators. Summer sun could also make long hours on a tractor uncomfortable.

So, the Williams family added sunshade products to the company's range. That gave equipment owners another form of operator coverage for warm-weather work.

Original Tractor Cab could now serve more seasons.

Three Generations of the Williams Family

Three generations of the Williams family helped carry Original Tractor Cab forward.

Each generation responded to new machines and changing customer needs. However, the basic goal stayed easy to understand.

Make outdoor equipment more comfortable to use in bad weather.

From Early Farm Tractors to Cub Cadet Garden Tractors

A Cub Cadet 3000 Series garden tractor is very different from the farm machine Stanley Williams used in 1939.

Yet the operator still faces the same rain, snow, sleet, wind, cold, and sun. Therefore, the need behind Cab 10974 is much the same as the need that started the company.

The equipment changed, but the weather did not.

Made in the USA Since 1939

Original Tractor Cab remains based in Arlington, Indiana. The company also continues its long American manufacturing tradition.

Today, its products include tractor cabs, lawn and garden tractor enclosures, snowblower cabs, mower enclosures, sunshades, and related accessories. Meanwhile, direct sales help customers buy from the company behind the product.

Cab 10974 carries that history to Cub Cadet 3000 Series owners.

Read more on our Original Tractor Cab company history page.

Cub Cadet 3000 Series Cab 10974 Questions

What tractors fit Original Tractor Cab 10974?

Cab 10974 is designed for compatible Cub Cadet 3000 Series GT garden tractors. Because the 3000 Series covers many models and years, confirm your exact tractor and current configuration before ordering.

Is Cab 10974 a hardtop cab?

Yes. Original Tractor Cab 10974 includes a molded hard plastic roof over the operator station.

Does Cab 10974 have doors?

Yes. The cab includes right and left hinged doors with door hardware and latches for operator access.

Does Cab 10974 require drilling?

No holes are normally required on the correct compatible tractor. The model-fit cab uses existing tractor mounting points.

How long does Cab 10974 take to install?

Normal first installation takes about three to four hours. However, tractor condition, tools, and installer experience can change the time.

How tall is the Cub Cadet with Cab 10974 installed?

Original Tractor Cab lists an approximate cab height of 72 inches. Still, measure your finished tractor because tires and machine setup can change the actual height.

Does Cab 10974 help protect from snow?

Yes. The hardtop and enclosure help reduce direct exposure to normal falling and blowing snow.

Does Cab 10974 help protect from rain?

Yes. The cab helps block much of the direct rain around the operator. However, the enclosure is not a sealed waterproof compartment.

Does the cab help block wind and sleet?

Yes. The enclosure can reduce direct exposure to cold wind and normal sleet. Still, the cab is not airtight or heated.

Does Cab 10974 provide hail protection?

No. Cab 10974 is not certified hail or falling-object protection. Seek safe shelter during severe weather.

Does Cab 10974 provide rollover protection?

No. Cab 10974 is a weather enclosure and does not provide certified rollover protection.

Does the cab protect from mower or snowblower debris?

No. The windshield, doors, roof, and frame are not certified debris or impact protection. Keep all factory guards in place.

What models were in the Cub Cadet 3000 Series?

The broad 3000 Series family included models such as the 3165, 3184, 3185, 3186, 3204, 3205, 3206, 3208, 3225, 3235, 3240, GT 3100, GT 3200, GT 3204, and GT 3235.

How much horsepower did Cub Cadet 3000 Series tractors have?

Published ratings vary by model. Across the broad family, power ranged from about 16 horsepower on early models to about 25 horsepower on selected later models.

What mower deck sizes were used on the 3000 Series?

Published mower configurations across the series include decks around 44, 48, 50, 54, and 60 inches. Some model and year combinations differ.

Did Cub Cadet 3000 Series tractors use hydrostatic drive?

Yes. Hydrostatic drive was a key feature across the 3000 Series garden tractor family.

Is Cab 10974 a genuine Cub Cadet OEM cab?

No. Cab 10974 is an aftermarket product made by Original Tractor Cab Co., Inc. for compatible Cub Cadet 3000 Series garden tractors.

Non-OEM and Liability Disclaimer

This is an aftermarket product produced by the Original Tractor Cab Co. Inc., it is not a genuine OEM item. This product will only protect from elements not rollover or debris.

Original Tractor Cab Co., Inc. is not affiliated with, sponsored by, or endorsed by Cub Cadet or MTD Products. Cub Cadet, its logos, model names, series names, and related trademarks remain the property of their respective owners. Brand and model references on this page are used only to identify intended product compatibility.

Cab 10974 is intended for compatible Cub Cadet 3000 Series GT garden tractors. The 3000 Series includes multiple models and production years. Therefore, owners must confirm the exact tractor, model number, serial number, controls, seat, attachments, and current machine configuration before purchase and installation.

Many Cub Cadet 3000 Series tractors have now been in service for decades. Previous owners may have changed seats, tires, engines, controls, fenders, attachments, or other parts. Such changes may affect cab fit.

Cab 10974 is designed to help reduce direct exposure to normal weather, including rain, snow, sleet, wind, and cold. It does not create a sealed, heated, waterproof, impact-resistant, or certified protective operator compartment.

The cab roof, frame, doors, windshield, and rear enclosure do not provide certified rollover, falling-object, collision, hail, or debris protection. Never use Cab 10974 as a ROPS, FOPS, impact shield, or debris guard.

Always follow the Cub Cadet operator manual and the current Original Tractor Cab installation instructions. Keep every factory guard, shield, warning label, brake, PTO shield, interlock, and other safety device in place and working.

Never drill, cut, bend, weld, remove, or weaken a factory safety component to force the cab to fit. Stop installation and confirm the application if the tractor does not match the cab instructions.

Before use, check the steering, pedals, brake, throttle, PTO controls, mower controls, attachment movement, doors, visibility, cooling airflow, and operator exit. Stop using the tractor if any cab component interferes with normal operation.

Attachments can change tractor dimensions, weight, traction, stability, and handling. Therefore, follow the correct Cub Cadet instructions for mower decks, snow throwers, blades, ballast, tire chains, carts, and other equipment.

California Proposition 65 Warning

WARNING: Cancer and Reproductive Harm — www.P65Warnings.ca.gov.

This product and the equipment on which it is installed may expose users to chemicals known to the State of California to cause cancer, birth defects, or other reproductive harm. Possible sources may include gasoline engine exhaust, fuel, oils, batteries, plastics, vinyl, metals, electrical components, and other tractor or cab materials. Follow all product and equipment safety instructions. Operate gasoline-powered equipment outdoors with proper ventilation, wash hands after handling applicable materials, and avoid unnecessary exposure.