Original Tractor Cab Sunshade 30627 for Ferris Zero-Turn Mowers

The Ferris 300S and 500S are made to cover ground fast. Yet fast mowing can still mean a lot of time in the seat when you care for a large lawn or property.

Sunshade 30627 puts a soft canopy above the operator. Thus, it helps reduce direct overhead sun during long mowing jobs.

Open sides also let air move around the seat.

Made for the Ferris 300S and Ferris 500S

Original Tractor Cab identifies product 30627 as a Soft Top Sunshade for the Ferris 300S and Ferris 500S zero-turn mowers.

Model-fit design matters on a zero-turn mower because the seat, controls, engine area, frame, and operator space all affect canopy fit. Therefore, confirm your mower model before you order.

Do not buy by mower color or appearance alone.

Ferris 300S Sunshade

The Ferris 300S combines zero-turn control with a compact mower design. Ferris also uses suspension technology to help smooth the ride.

However, the operator still sits in an open area. Direct sun can reach the driver throughout a long mowing job.

Sunshade 30627 adds overhead sun protection.

Shade for Long Ferris 300S Mowing Jobs

A Ferris 300S can mow at speeds of up to about 8 mph on current configurations. So, it can cover a lot of lawn in a day.

Even with that speed, large properties can require long periods in the seat. Therefore, overhead shade can make warm-weather mowing more pleasant.

The open sides still allow natural airflow.

Ferris 500S Sunshade

Sunshade 30627 also fits the Ferris 500S. This zero-turn mower steps up in power, drive components, suspension, and deck choices.

Current Ferris 500S models can reach forward speeds of up to 8.5 mph. Yet a large mowing job can still keep the operator outside for hours.

The 30627 canopy adds useful shade above the seat.

Sun Protection for the Ferris 500S

Ferris built the 500S for productive mowing. Its suspension system can help reduce the effect of rough ground on the operator.

Still, suspension cannot block the sun. So, a model-fit soft top sunshade adds another form of operator comfort.

The result is shade without a closed operator area.

Why Add a Sunshade to a Zero-Turn Mower?

Zero-turn mowers often work during the brightest months of the year. In addition, mowing commonly takes place when lawns are dry and the sun is high.

That means the operator may spend a large part of the job in direct sunlight. A canopy places a layer of shade above the seat.

Normal sun-safe habits are still important.

Useful Overhead Sun Protection

Sunshade 30627 focuses on a simple job. It helps block direct overhead sunlight from reaching the operator.

As the sun moves, light may still enter from the front, rear, or sides. Therefore, the canopy does not replace sunscreen, protective clothing, water, or normal heat precautions.

It simply adds useful shade above the seat.

Open-Air Comfort for Warm Days

A full enclosure can help during cold or wet work. However, warm summer mowing often calls for airflow.

Sunshade 30627 keeps the sides open. Thus, natural air can move around the operator while the soft top provides overhead cover.

Airflow will vary with wind and mower speed.

A Soft Top Canopy for Ferris Mowers

Sunshade 30627 uses a soft-top design rather than a large rigid cab. This keeps the product focused on shade and warm-weather comfort.

The canopy sits above the operator while the rest of the mower remains open. As a result, the driver keeps the open-air feel of a zero-turn mower.

That simple design suits normal lawn care.

Shade Without a Full Cab Enclosure

A sunshade and an all-weather cab do different jobs. The sunshade mainly helps with overhead sun.

By contrast, a full cab can provide broader coverage from wind, rain, snow, and sleet when designed for that machine. Therefore, buyers should choose the type of protection that matches the job.

Sunshade 30627 is mainly a warm-weather product.

Great for Large Lawns and Long Mowing Sessions

A small yard may take only a short time to mow. Large residential properties, estates, grounds, and commercial sites can take much longer.

As seat time grows, operator comfort matters more. So, adding overhead shade can be a practical upgrade for a Ferris 300S or 500S.

The mower can keep its open operator layout.

Shade for Residential Mowing

Homeowners may use a Ferris mower because they want a fast and smooth way to care for a large lawn. Yet even a fast mower cannot make the summer sun go away.

Sunshade 30627 gives the operator an area of overhead shade. Therefore, it can add comfort during routine lawn care.

Always take normal breaks during hot weather.

Shade for Light Commercial Work

Ferris positions the 300S as a commercially inspired mower for residential and light-commercial users. The 500S also brings commercial-style features to its class.

Operators may spend many hours mowing over the course of a week. Thus, a sunshade can become a useful comfort accessory.

It does not change mower performance or capacity.

Sunshade 30627 and Ferris Suspension Comfort

Ferris is well known for mower suspension. Current 300S models use suspension systems that vary with configuration, while the 500S uses front and rear suspension.

Suspension can help smooth the ride. Meanwhile, Sunshade 30627 addresses a different source of operator discomfort: direct sun.

Together, those features focus on time in the seat.

Two Different Forms of Operator Comfort

A suspension system works below the operator by helping manage rough ground. In contrast, a canopy works above the operator by providing shade.

Neither feature replaces safe mowing habits. However, both can help make long mowing jobs more pleasant.

Always operate the mower at a safe speed for the ground.

Keep Your Ferris Zero-Turn Mower Open

Zero-turn mowers depend on clear access to steering controls and good sight around the machine. Therefore, a canopy must not interfere with normal operation.

Sunshade 30627 is designed for the named Ferris models. Still, the owner should inspect all clearances after installation.

Never use the mower if the shade blocks a control or view.

Check Operator Clearance

Sit in the normal mowing position after installation. Then, move each steering lever through its full normal range.

Next, check entry and exit space. Also, make sure no sunshade part contacts the seat or operator during normal use.

Correct any problem before mowing.

Watch for Trees and Low Objects

A canopy adds height to a zero-turn mower. Therefore, branches that once passed over the operator may strike the installed shade.

Check trees, garage doors, sheds, trailers, signs, and other low objects before you drive below them. Never use the canopy to push a branch out of the way.

Slow down when clearance is tight.

Know the Full Installed Height

Mower specifications normally list the machine without an aftermarket sunshade. So, the factory mower height is not the same as the final height with Sunshade 30627 installed.

Measure the complete mower after installation. Then, leave added clearance below any overhead object.

Do not rely on a close visual guess.

Care for Your Ferris Soft Top Sunshade

Outdoor equipment collects dust, grass, pollen, and dirt. Therefore, routine cleaning can help keep a soft canopy looking better.

Use mild cleaning methods that are safe for the canopy material. Also, inspect the supports and mounting hardware while you clean the mower.

Fix loose or damaged parts before use.

Store the Mower With Care

Indoor storage can help protect both the mower and sunshade from needless weather exposure. If indoor space is not available, follow the product care directions for outdoor storage.

Do not place heavy objects on the soft top. Likewise, keep sharp tools and branches away from the canopy.

Inspect the shade before each mowing season.

Sunshade 30627 Is Not a Rollover Structure

A mower canopy can look like a protective frame from a distance. However, Sunshade 30627 is not a certified Roll-Over Protective Structure.

The shade is made to provide overhead sun protection. Therefore, never depend on the canopy or its supports for rollover protection.

Use all factory safety systems as Ferris directs.

No Protection From Mower Debris

A mower deck can throw rocks, sticks, and other objects. Sunshade 30627 is not a certified debris shield.

So, inspect the mowing area before starting work. Keep people and animals well away from the mower while the blades are running.

Follow every Ferris safety warning.

Sunshade Protection Versus Weather Protection

Sunshade 30627 gives the operator overhead shade. Yet it does not surround the driver with doors, windows, or side panels.

Rain, snow, sleet, hail, and wind can still reach the operator. Therefore, do not treat this product as an all-weather cab enclosure.

Its main job is sun protection.

What Happens in Light Rain?

The canopy may block some rain that falls from directly above. However, wind can carry rain under an open-sided shade.

For that reason, the product should not be described as a full rain cab. Instead, think of Sunshade 30627 as a mower canopy made mainly for shade.

Stop mowing when weather makes operation unsafe.

Why Buy Ferris Sunshade 30627 Direct?

Buying direct from Original Tractor Cab connects you with the company behind Sunshade 30627. That can be useful when you have questions about mower fit, installation, or replacement parts.

You can browse more tractor and mower sunshades for other model-fit options.

For other Ferris products, visit our Ferris mower cab and sunshade collection.

Before installation, review the current Original Tractor Cab installation manuals.

If you need help with fit, use our Original Tractor Cab contact page.

Ferris 300S and 500S Zero-Turn Mower Specifications

Sunshade 30627 fits the Ferris 300S and Ferris 500S. Both machines use zero-turn steering and gasoline engines, but exact specifications vary by deck, engine, year, and configuration.

Ferris currently offers more than one setup in these mower families. Therefore, the exact model and product number should be checked when buying mower parts.

Sunshade fit does not mean all mower parts interchange.

Ferris 300S Specifications

Ferris describes the 300S as a compact, commercially inspired zero-turn mower. Current models start with a 42-inch deck, while other configurations use wider decks.

Depending on configuration, current 300S models use Briggs & Stratton or Kawasaki gasoline engines. Published power starts at about 21.5 horsepower.

Top forward speed reaches about 8 mph on current versions.

Ferris 300S Engine Options

Current Ferris information shows both Briggs & Stratton and Kawasaki engine choices in the 300S family. Power varies with the selected mower.

Briggs & Stratton PXi configurations use V-twin gasoline engines, while some current models use Kawasaki FR Series power. Therefore, owners should check the mower product number before ordering engine parts.

Do not identify the engine from mower color alone.

Ferris 300S Deck Sizes

Current Ferris specifications show 42-inch, 48-inch, and 52-inch deck configurations in the 300S family. Exact availability can change with model year.

A smaller deck can help in tighter spaces. Meanwhile, a larger deck can cover more lawn with each pass.

Use the correct blades and belts for the exact deck.

Ferris 300S Cutting Height

Current Ferris specifications list a cutting-height range of about 1.5 to 4.5 inches on 300S models.

That range gives owners room to adjust mowing height for lawn needs. However, grass type and conditions should guide the final setting.

Never adjust the deck while the blades are running.

Ferris 300S Transmission

Current 300S configurations use dual Hydro-Gear transaxles. The exact transaxle series varies by mower configuration.

Some versions use ZT-2200 units, while other current versions use ZT-2800 transaxles. Therefore, the mower product number matters when service parts are needed.

Follow the Ferris service schedule.

Ferris 300S Suspension

Suspension is a major part of the Ferris mower design. Current 300S configurations use front suspension, while selected versions also use front and rear suspension.

This system helps the mower follow uneven ground while adding operator comfort. Still, safe travel speed depends on terrain.

Slow down on rough or sloped ground.

Ferris 300S Fuel Capacity

Current U.S. Ferris specifications list a fuel capacity of about 3 gallons for the 300S.

Fuel capacity helps support longer mowing sessions. Even so, refuel only when the engine is off and cool.

Follow all fuel safety instructions.

Ferris 500S Specifications

The Ferris 500S moves farther into the commercial-style zero-turn class. Current models use 48-inch, 52-inch, and 61-inch deck configurations.

Published engine power is about 24 to 25 horsepower, depending on configuration. Top forward speed is listed at up to 8.5 mph.

The 500S also uses front and rear suspension.

Ferris 500S Engine Options

Current 500S models include Briggs & Stratton CXi Series engine configurations. Ferris also lists a Kawasaki-powered configuration in the current U.S. range.

The Briggs & Stratton CXi V-twin has a displacement of about 724 cc on listed models. Meanwhile, the Kawasaki FR730V configuration is listed at about 726 cc.

Always service the exact installed engine.

Ferris 500S Deck Sizes

Current U.S. Ferris specifications list 48-inch, 52-inch, and 61-inch mower deck options in the 500S range.

A 48-inch deck can work well where space is tighter. In contrast, the 61-inch deck can cover more ground on large open lawns.

Deck availability varies by mower configuration.

Ferris 500S Fabricated Deck

Ferris uses fabricated mower decks on the 500S. Current specifications show heavy deck construction intended for demanding mowing.

The exact deck setup varies by width and market. Therefore, check the mower product number when ordering deck parts.

Keep all discharge guards in place.

Ferris 500S Cutting Height

Ferris lists a cutting-height range of about 1.5 to 4.5 inches on current 500S models.

The mower lets the operator choose a height that suits the lawn and season. Still, avoid cutting too much grass height in one pass.

Use safe deck adjustment methods.

Ferris 500S Hydro-Gear Drive

Current 500S models use dual Hydro-Gear transaxles. Depending on configuration, Ferris lists ZT-2800 or ZT-3100 units.

These independent drives allow zero-turn steering. As a result, the mower can turn tightly around landscape features.

Practice steering in an open area before mowing near objects.

Ferris 500S Ground Speed

Ferris lists a top forward speed of up to 8.5 mph for the current 500S. Reverse speed is listed at up to about 4 mph.

Top speed is not the right speed for every lawn. Therefore, slow down when ground conditions, slopes, obstacles, or grass require more control.

Quality and safety come before speed.

Ferris 500S Suspension System

The 500S uses Ferris front and rear suspension. Current Ferris information describes a pivoting front system and rear swingarm suspension with coil-over shocks.

This system can help reduce the effect of uneven terrain on the operator. Moreover, it helps keep the mower productive on less-than-perfect ground.

Suspension does not make unsafe terrain safe.

Ferris 300S Versus Ferris 500S

Both mowers use zero-turn control and are made for productive lawn care. However, the 300S has a more compact entry point into the Ferris lineup.

The 500S steps up with larger deck choices, stronger drive options, and a higher published top speed. In addition, the 500S uses front and rear suspension across the current line.

Sunshade 30627 is designed for both mower families.

Choose the Mower for the Property

A smaller deck can make sense around gates, trees, beds, and tight areas. On the other hand, a wider deck can save time on large open ground.

Engine and transmission choices also vary. Therefore, mower buyers should compare the exact Ferris configuration with their property and workload.

Sunshade choice is much simpler when model fit is known.

Official Ferris Mower Information

Mower specifications can change as Ferris updates its product line. Therefore, use current manufacturer information when buying service parts or checking machine limits.

For current Ferris zero-turn mower models and specifications, visit the official Ferris zero-turn mower website.

For current information about the 300S and its available configurations, visit the official Ferris 300S product page.

The History of Original Tractor Cab Company

Original Tractor Cab began in 1939. At that time, Indiana farmer Stanley Williams needed better protection while he worked on his tractor.

So, Stanley designed a cab for his own machine. Other farmers soon saw the idea and wanted similar weather protection.

A practical farm solution began to grow.

Born From a Real Farm Need

Farm work does not stop each time the weather changes. Rain, wind, cold, snow, and sun have always been part of outdoor work.

Stanley knew that problem from his own farm. Therefore, his first cab came from real use rather than a showroom idea.

Other farmers understood the value at once.

One Cab Became an American Business

Stanley placed an ad in a farm magazine to see if other people wanted his cab. The response showed that many farmers shared the same need.

As a result, one farmer's solution grew into Original Tractor Cab Company. The business dates its start to 1939.

American manufacturing became part of its story.

Original Tractor Cab During World War II

World War II changed the young company. Normal cab work gave way to products needed for the war effort.

Workers made packs and other goods for military use. After the war, Original Tractor Cab returned its focus to products for people who work outdoors.

New equipment soon created new markets.

From Farm Tractors to Lawn Equipment

Outdoor power equipment changed greatly after the war. Lawn tractors, garden tractors, snowblowers, and later zero-turn mowers became common.

Original Tractor Cab changed with the equipment. Thus, the company developed new cab and enclosure designs for many types of outdoor machines.

The product range grew beyond farm tractors.

Robert Williams and Snowblower Cabs

The second generation helped move the company into new markets. Stanley's son, Robert Williams, developed and patented a cab for walk-behind snowblowers.

That design helped operators deal with blowing snow and winter wind. In turn, the product helped expand Original Tractor Cab into lawn and garden equipment.

The family kept finding new uses for operator protection.

Wayne Williams and Sun Protection

Cold weather was only part of the problem for outdoor operators. Summer sun could also make long work days less pleasant.

In the early 1990s, Stanley's grandson Wayne Williams developed and patented a sunshade for tractors and lawn equipment. Therefore, Original Tractor Cab expanded from foul-weather protection into warm-weather shade.

Products such as Sunshade 30627 continue that idea.

Three Generations of the Williams Family

Three generations of the Williams family helped move Original Tractor Cab forward. Each generation responded to changes in outdoor equipment.

Yet the core goal stayed easy to understand. Build useful products for people who spend time working outdoors.

That same idea applies to zero-turn mower owners today.

Made in the USA Since 1939

Original Tractor Cab remains based in Arlington, Indiana. The company also continues its long American manufacturing tradition.

Today, Original Tractor Cab makes hardtop cabs, soft cab enclosures, tractor sunshades, mower sunshades, snow equipment cabs, and related accessories.

Sunshade 30627 is part of that history.

From Tractor Cabs to Ferris Zero-Turn Sunshades

Stanley Williams could not have seen a modern Ferris zero-turn mower when he built his first cab in 1939. Yet the operator need remains familiar.

People still work outside in sun and changing weather. Therefore, Original Tractor Cab continues to adapt its products to modern machines.

Sunshade 30627 brings that long history to Ferris 300S and 500S owners.

Read more on the Original Tractor Cab company history page.

Ferris 300S & 500S Sunshade 30627 FAQ

What mowers fit Original Tractor Cab Sunshade 30627?

Original Tractor Cab and dealer product listings identify Sunshade 30627 for Ferris 300S and Ferris 500S zero-turn mowers.

Does Sunshade 30627 fit the Ferris 300S?

Yes. Original Tractor Cab identifies product 30627 as a sunshade for the Ferris 300S.

Does Sunshade 30627 fit the Ferris 500S?

Yes. The Ferris 500S is also a listed application for Original Tractor Cab Sunshade 30627.

Is Sunshade 30627 a full cab?

No. Product 30627 is a soft top sunshade. It gives the operator overhead shade while keeping the sides open.

Will the Ferris sunshade protect me from the sun?

The canopy provides overhead shade and can reduce direct sunlight from above. However, sunlight can still enter through the open front, rear, and sides.

Does the Ferris sunshade provide airflow?

The open-sided design allows natural air to move around the operator. Actual airflow depends on weather and mower speed.

Can I use Sunshade 30627 in rain?

The top may block some moisture falling from directly above. However, this is not a full rain enclosure, and wind can carry rain through the open sides.

Does Sunshade 30627 protect from snow or sleet?

No. It is an open-sided sunshade rather than an all-weather enclosure. Snow, sleet, rain, and wind can reach the operator.

Does the sunshade protect from hail?

No. Sunshade 30627 should not be treated as certified hail, impact, or falling-object protection.

Does Sunshade 30627 provide rollover protection?

No. The sunshade and its support structure are not a certified Roll-Over Protective Structure.

Does the canopy protect against mower debris?

No. Sunshade 30627 is not a certified debris or impact shield. Always clear the mowing area and follow Ferris safety instructions.

How fast is a Ferris 300S?

Current Ferris specifications show a maximum forward speed of up to about 8 mph on selected 300S configurations.

How fast is a Ferris 500S?

Current Ferris specifications list a maximum forward speed of up to 8.5 mph for the 500S.

What deck sizes are available on the Ferris 300S?

Current Ferris information shows 42-inch, 48-inch, and 52-inch configurations. Availability can vary by year and mower model.

What deck sizes are available on the Ferris 500S?

Current U.S. Ferris information shows 48-inch, 52-inch, and 61-inch deck configurations.

Is Sunshade 30627 made by Ferris?

No. Sunshade 30627 is an aftermarket product made by Original Tractor Cab Co., Inc. for compatible Ferris equipment.

Should I check clearance after installation?

Yes. Check steering controls, entry and exit space, overhead height, seat movement, engine clearance, and all installed equipment before mowing.

Non-OEM and Liability Disclaimer

This is an aftermarket product produced by the Original Tractor Cab Co. Inc., it is not a genuine OEM item. This product will only protect from elements not rollover or debris.

Original Tractor Cab Co., Inc. is not affiliated with, sponsored by, or endorsed by Ferris or Briggs & Stratton. Ferris, Briggs & Stratton, Kawasaki, Hydro-Gear, related logos, trademarks, and model names remain the property of their respective owners. Brand and model references are used only to identify intended product compatibility.

Sunshade 30627 is intended for compatible Ferris 300S and 500S zero-turn mowers. The owner must confirm the exact mower model, product number, configuration, seat, controls, attachments, and installed equipment before purchase and installation.

Mower specifications can change by year and configuration. Engine, deck, transmission, tire, seat, suspension, and other equipment may differ from one Ferris 300S or 500S to another.

Sunshade 30627 is designed mainly to provide overhead shade. It does not create a full weather enclosure and does not provide certified protection from rollover, collision, impact, debris, thrown objects, falling objects, hail, or other accidents.

The sunshade and its support structure are not a Roll-Over Protective Structure, Falling Object Protective Structure, collision guard, debris shield, operator restraint, or other certified safety structure.

Always follow the Ferris operator manual and current Original Tractor Cab installation instructions. Keep all factory guards, shields, labels, interlocks, switches, controls, and other safety equipment in place and in good working order.

Stop installation or use if any sunshade part interferes with steering levers, operator entry or exit, seat movement, engine parts, mower controls, deck components, discharge guards, visibility, or other safety equipment.

The sunshade adds height to the mower. Therefore, check trees, branches, garage doors, sheds, trailers, signs, and all other overhead objects before driving below them.

Never use the sunshade or its supports as a lifting point, tie-down point, cargo rack, handhold, towing point, rollover structure, or attachment mount.

California Proposition 65 Warning

WARNING: Cancer and Reproductive Harm — www.P65Warnings.ca.gov.

This product and the equipment on which it is installed may expose users to chemicals known to the State of California to cause cancer, birth defects, or other reproductive harm. Possible sources may include gasoline engine exhaust, fuel, oils, batteries, plastics, vinyl, metals, electrical components, and other mower or accessory materials. Follow all product and equipment safety instructions. Use proper ventilation, wash hands after handling applicable materials, and avoid unnecessary exposure.