Honda Two-Stage Snowblower Cab for 1995-2014 Models

Snow removal puts the operator close to blowing snow. A two-stage snowblower moves a large amount of snow through the auger and impeller. Then, wind can send part of that snow back toward the person behind the machine.

Cab 9668 creates a weather barrier around the operator area. Therefore, much of the direct snow and sleet meets the enclosure before it reaches your face and upper body.

The cab is not sealed or heated. Still, it can make a major difference when snow blows back across a drive, walk, or parking area.

Designed for Compatible Honda Two-Stage Walk-Behind Snowblowers

Original Tractor Cab designed Cab 9668 for compatible Honda walk-behind two-stage snowblowers. The listed fit range covers machines made from 1995 through 2014.

That date range matters because Honda snowblower designs changed over time. Therefore, check the exact model and production information before you order.

Cab 9668 is not a universal snowblower enclosure. Instead, its frame and mounting system are intended for the compatible Honda machines in the stated fit range.

Cab 9668 Does Not Fit Honda HSS Snowblowers

Honda introduced newer HSS two-stage snowblower designs after the machines covered by Cab 9668. Those models use a different machine layout.

Therefore, Original Tractor Cab clearly states that Cab 9668 does not fit HSS models. Do not order this enclosure for an HSS724, HSS928, HSS1332, or another Honda HSS snowblower.

Always check the model tag before buying. If you are not sure which Honda snowblower you own, confirm the model before placing an order.

Optically Clear, Shatter-Resistant Window Material

Good visibility is vital during snow removal. So, Cab 9668 uses optically clear, shatter-resistant window material.

The clear front area helps you watch the path ahead. Likewise, it helps you see the discharge chute, nearby vehicles, garage doors, walls, people, and other objects.

Snow and ice can still block your view. Therefore, stop the machine when you cannot clearly see the work area.

Nylon-Reinforced Stop-Rip Vinyl

Cab 9668 uses nylon-reinforced stop-rip vinyl material. This flexible material forms much of the weather enclosure around the operator.

Reinforcement helps the material stand up to normal snowblower use. Meanwhile, the flexible design keeps the cab much lighter than a rigid enclosure.

Inspect the vinyl before each snow season. Small cuts, loose fasteners, or worn areas should be addressed before the machine returns to regular winter work.

16-Gauge Steel Tube Frame

A strong frame gives a snowblower cab its shape. Cab 9668 uses 16-gauge, 1/2-inch steel tubing for its supporting structure.

The steel frame holds the enclosure around the operator while the snowblower moves. Therefore, the cab does not depend on the vinyl alone to keep its form.

Check the frame and mounting points from time to time. Tight hardware helps keep the enclosure in the correct position.

Protection From Blowing and Swirling Snow

A snowblower may throw snow in the right direction, yet the wind may have a different plan. Fine snow can curl around and blow back toward the operator.

Cab 9668 helps block much of that direct snow. As a result, less blowing snow can reach your face, coat, and upper body.

The enclosure cannot stop all snow in every wind. However, it gives the operator a useful barrier during normal snow removal.

Sleet Protection During Winter Storms

Snow is not the only winter problem. Sleet can fall while a drive or walk still needs to be cleared.

The cab adds cover above and around the operator. So, it helps reduce direct contact with falling and wind-driven sleet.

Ice can also form on the clear window material. Therefore, keep the viewing area clear and stop work if you cannot see safely.

Cold Wind Protection

A walk-behind snowblower leaves the operator fully exposed to winter wind. Moving behind the machine can also add to the airflow around your body.

Cab 9668 creates a barrier between you and much of that direct wind. Thus, the operator has more cover than with an open snowblower.

The enclosure does not have insulation or heat. So, always dress for the outside temperature and weather conditions.

Useful During Long Snow Removal Jobs

A small snowfall may take only a short time to clear. Yet a deep storm can mean many passes over the same drive or walk.

Repeated exposure to blowing snow and cold wind can make that work much harder. Therefore, added weather cover can become more useful as the job gets longer.

Cab 9668 does not make snow removal risk-free. Instead, it helps reduce direct exposure to normal winter weather.

Keep a Clear View of the Discharge Area

A two-stage snowblower can throw snow a long distance. So, always know where the chute is aimed.

The clear cab material helps preserve a view of the surrounding work area. However, the enclosure does not replace careful operation.

Never discharge snow toward people, pets, vehicles, windows, or other objects that may be damaged.

Never Clear a Clogged Chute by Hand

A clogged discharge chute can contain stored force. Therefore, never put a hand into the chute or auger housing.

Stop the engine and wait for all moving parts to stop. Then, follow the Honda operator manual and use the approved chute-clearing method for your machine.

The snow cab does not change this rule. Always treat the auger and impeller as serious hazards.

Keep the Cab Away From Hot Engine and Exhaust Parts

A gasoline snowblower creates heat and exhaust. Therefore, cab material must remain clear of hot engine and exhaust parts.

Never change the cab frame in a way that moves vinyl or clear material toward the muffler. Also, stop using the cab if heat begins to damage any enclosure part.

Operate the snowblower outdoors with good airflow. Never use the machine in a closed garage or another enclosed area.

Inspect the Cab Before Every Snow Season

Seasonal equipment may sit for many months. So, inspect Cab 9668 before the first storm.

Check the steel frame, mounts, vinyl, clear window material, and all hardware. Then, fix loose or damaged parts before operating the snowblower.

A short preseason check can also help you find missing hardware before snow is already on the ground.

Installation Help for Honda Snowblower Cab 9668

Read the current instructions before you install the cab. First, identify the snowblower model. Next, compare the machine with the listed Cab 9668 fit range.

Correct assembly helps keep the frame clear of the snowblower controls and moving parts. Therefore, never guess at bracket location or alter the machine to force a fit.

Visit the Original Tractor Cab installation manual library for current installation information.

Need help with fit before you order? Use the Original Tractor Cab contact page to ask about your Honda snowblower.

Buy Honda Snowblower Cab 9668 Direct From Original Tractor Cab

Cab 9668 is made for an older group of Honda two-stage snowblowers. Therefore, correct model identification is especially important.

Buying direct connects you with the company behind the enclosure. So, you have a direct source for fit information, instructions, replacement parts, and product support.

Browse Original Tractor Cab snowblower cabs to find more weather enclosures for snow equipment.

You can also browse Original Tractor Cab accessories for available replacement and cab-related products.

Honda Two-Stage Snowblower Specifications and Model Information

Cab 9668 fits compatible Honda two-stage walk-behind snowblowers made from 1995 through 2014. Because that range covers many years and several machines, there is no single engine size, clearing width, weight, or capacity that applies to every snowblower that fits the cab.

For that reason, use the model and serial number on your Honda snowblower when you need exact machine specifications. Older Honda models may differ in engine, drive, clearing width, controls, and track or wheel design.

Modern Honda HSS specifications below give useful context for how Honda two-stage snowblower technology works today. However, HSS models do not fit Original Tractor Cab 9668.

How a Honda Two-Stage Snowblower Works

A two-stage snowblower uses two main steps to move snow. First, the auger collects snow and feeds it toward the center of the machine.

Next, a fast-spinning impeller sends that snow through the discharge chute. Therefore, a two-stage machine can move deep or heavy snow farther than many small single-stage designs.

This process also means the auger, impeller, and chute are serious hazard areas. Never place a hand or foot near them while the machine can move.

Honda Two-Stage Snowblower Engines

Honda has long used its own four-stroke engines on its two-stage snowblowers. Engine size varies by machine.

For example, the current HSS724 uses a commercial-grade Honda GX200 engine with 196 cc of displacement. Meanwhile, the current HSS928 uses a Honda GX270 with 270 cc.

The larger current HSS1332 uses a Honda GX390 with 389 cc of displacement. Again, these current HSS specifications do not mean that Cab 9668 fits those machines.

Hydrostatic Drive on Modern Honda Two-Stage Snowblowers

Current Honda HSS two-stage machines use hydrostatic drive with infinitely variable travel speed. That system lets the operator match ground speed to snow conditions.

Deep or wet snow may call for slower travel. In contrast, lighter snow may allow a faster pace.

Older Honda snowblowers covered by Cab 9668 may have different controls and drive specifications. Therefore, follow the manual for the exact machine you own.

Honda Wheel-Drive and Track-Drive Snowblowers

Honda offers both wheel-drive and track-drive two-stage snowblower designs. Each setup serves a different type of work.

Wheel-drive machines can be easy to move and turn on many paved surfaces. Meanwhile, track-drive machines can add traction in deep snow and on difficult ground.

The machines covered by Cab 9668 span older Honda product generations. So, confirm your exact machine rather than assuming that a current HSS specification also applies to it.

Honda HSS724 Current Specifications

The current Honda HSS724 uses a 196 cc GX200 four-stroke engine. Honda offers both wheel-drive and track-drive versions.

The HSS724 clears about 24 inches of width and 21.7 inches of height. Honda rates maximum snow discharge distance at up to 49 feet and maximum capacity at up to 1,500 pounds per minute.

These specifications show the capability of Honda's current 24-inch two-stage line. However, Cab 9668 does not fit the HSS724.

Honda HSS928 Current Specifications

The current HSS928 uses a Honda GX270 engine with 270 cc of displacement. Wheel-drive and track-drive configurations are available.

Honda lists a 28-inch clearing width and 21.7-inch clearing height. Maximum throw distance is up to 52 feet, while maximum discharge capacity is rated at up to 1,900 pounds per minute.

The HSS928 also uses hydrostatic drive. Still, this current model is outside the Cab 9668 fitment range and must not be used to judge cab fit.

Honda HSS1332 Current Specifications

Honda's current HSS1332 is a larger track-drive two-stage snowblower. It uses a 389 cc Honda GX390 commercial-grade four-stroke engine.

Clearing width is about 31.9 inches, while clearing height is 21.7 inches. Honda rates maximum throw distance at up to 56 feet and maximum snow-moving capacity at up to 2,750 pounds per minute.

These figures show how broad Honda's current two-stage range has become. However, the HSS1332 does not fit Cab 9668.

Honda Snowblower Clearing Width

Clearing width tells you how wide a path the snowblower can cut in one pass. The correct width depends on the exact machine.

Current Honda two-stage models range from about 24 inches to 36 inches. However, older Honda machines from 1995 through 2014 use their own published specifications.

Therefore, use the model number on your snowblower when you need exact width. Do not use clearing width alone to decide whether Cab 9668 fits.

Snow Throwing Distance

Snow discharge distance depends on the machine, snow type, engine speed, chute setting, and weather. Dry snow may move differently from wet, heavy snow.

Current Honda HSS machines can list maximum throw distances from about 49 feet to 56 feet, depending on model.

Older compatible machines may have different ratings. So, check the Honda manual for your exact snowblower rather than using a modern HSS number.

Honda Snowblower Starting Systems

Starting systems also vary by model. Some Honda two-stage machines use recoil starting, while certain versions add electric start.

Modern Honda HSS models continue this pattern. For example, selected HSS versions pair electric start with a recoil backup.

Older Cab 9668-compatible machines may use different systems. Therefore, use your exact Honda model and serial number for service and starting information.

Honda Snowblower Safety and Maintenance

Good maintenance matters on any snowblower. Check engine oil, fuel, belts, fasteners, skid shoes, scraper parts, auger components, and controls as the Honda manual directs.

Also, inspect the chute-clearing tool and safety labels before winter use. Never remove a guard or defeat a safety control to make the cab fit.

Visit the official Honda snowblower website for current Honda snow equipment information.

For more detail about Honda's current two-stage machines, visit the official Honda two-stage snowblower page .

How to Check Honda Snowblower Cab 9668 Fit

Start with the model number on your Honda snowblower. Next, confirm that the machine is a compatible two-stage walk-behind model from the 1995 through 2014 fit range.

Then, make sure the model is not part of the HSS series. Original Tractor Cab specifically excludes HSS snowblowers from Cab 9668 fitment.

Finally, inspect the machine for changes made by a previous owner. Modified handles, controls, lights, or other parts can affect enclosure clearance.

Do Not Order by Brand Name Alone

Honda has made many types of snowblowers. Therefore, the Honda name alone does not prove Cab 9668 will fit.

Production year alone is also not enough. The machine must match the compatible two-stage design covered by the cab.

When in doubt, check the model tag and contact Original Tractor Cab before ordering.

Why the HSS Exclusion Matters

Modern HSS snowblowers use a newer layout and newer control systems. As a result, a cab made around an earlier machine cannot be assumed to fit.

Incorrect fit may block controls, create poor clearance, or place cab material too close to moving or hot parts. Therefore, the HSS exclusion is a safety and fit issue, not just a model-name detail.

Use only an enclosure that is approved for the exact snowblower.

The History of Original Tractor Cab Company

Original Tractor Cab began in 1939. At that time, farmer Stanley Williams saw a simple problem. He needed better protection from the weather while he worked on his tractor.

So, Stanley designed the first cab prototype. Other farmers soon saw his idea and wanted similar weather protection.

Demand began to grow. As a result, one farmer's practical solution became the start of Original Tractor Cab Co., Inc.

Born From a Need for Weather Protection

The company began with a real outdoor problem. Rain, wind, snow, cold, and sun were part of farm work.

Better operator cover had clear value. Therefore, other equipment owners saw the benefit of Stanley's idea.

That simple focus on practical weather protection became the base of the company.

American Manufacturing Since 1939

Original Tractor Cab continued to grow as outdoor equipment changed. Tractors became more advanced, while lawn and garden equipment became more common.

Snow equipment also created a need for operator weather protection. So, the company expanded its product line beyond farm tractor cabs.

Today, Original Tractor Cab makes cabs, enclosures, sunshades, canopies, and related products for many types of outdoor equipment.

From Tractor Cabs to Snowblower Enclosures

The first Original Tractor Cab served a tractor operator. Yet the basic problem also applies to a person walking behind a snowblower.

Snow, sleet, and cold wind can make outdoor work hard. Therefore, snowblower cabs became a natural extension of the company's weather protection work.

Cab 9668 carries that idea to compatible Honda two-stage snowblowers from an earlier generation.

Three Generations of Practical Products

The Williams family carried Original Tractor Cab forward through three generations. Meanwhile, equipment continued to change.

The company responded with new cab and sunshade designs for tractors, mowers, snow equipment, and other machines.

Yet the main purpose stayed simple. Give people who work outdoors more cover from the weather.

Made in the USA Since 1939

Original Tractor Cab remains based in Arlington, Indiana. Its history now spans more than eight decades.

Machines are very different from those Stanley Williams used in 1939. However, winter weather still creates the same basic problem.

Cab 9668 continues the company's long focus on practical operator weather protection for outdoor equipment.

Read more on the Original Tractor Cab About Us page .

Honda Two-Stage Snowblower Cab 9668 FAQ

What snowblowers fit Original Tractor Cab 9668?

Original Tractor Cab lists Cab 9668 for compatible Honda two-stage walk-behind snowblowers made from 1995 through 2014. Confirm your exact Honda model before ordering.

Does Cab 9668 fit Honda HSS snowblowers?

No. Original Tractor Cab specifically states that Cab 9668 does not fit Honda HSS models.

Will Cab 9668 fit an HSS724?

No. The Honda HSS724 is an HSS-series machine. Therefore, it is excluded from Cab 9668 fitment.

Will Cab 9668 fit an HSS928?

No. Cab 9668 does not fit the Honda HSS928 because Original Tractor Cab excludes HSS models.

Will Cab 9668 fit an HSS1332?

No. The HSS1332 belongs to Honda's newer HSS line and does not fit Cab 9668.

What is the Cab 9668 window made from?

Original Tractor Cab describes the enclosure as using optically clear, shatter-resistant window material. This helps provide a broad view during snow removal.

What material is used for the cab enclosure?

Cab 9668 uses nylon-reinforced stop-rip vinyl material. The flexible material helps block direct blowing snow, sleet, and wind.

What is the Cab 9668 frame made from?

The supporting structure uses 16-gauge, 1/2-inch steel tubing. The steel frame holds the enclosure around the operator area.

Does Cab 9668 protect against blowing snow?

Yes. Cab 9668 is designed to help shield the operator from blowing and swirling snow during normal snowblower use.

Does Cab 9668 protect against sleet and cold wind?

The enclosure helps reduce direct exposure to normal sleet and cold wind. However, it is not a sealed, insulated, or heated cabin.

Can I use Cab 9668 indoors?

Never run a gasoline snowblower in a closed garage, shed, trailer, or other enclosed area. Engine exhaust contains carbon monoxide and can cause serious injury or death.

Does Cab 9668 protect against flying debris?

No. Cab 9668 is a weather enclosure. Its clear window and vinyl material are not debris guards or impact shields.

Is Cab 9668 a genuine Honda OEM product?

No. Original Tractor Cab Co., Inc. manufactures Cab 9668 as an aftermarket weather enclosure for compatible Honda snowblowers.

Non-OEM and Liability Disclaimer

This is an aftermarket product produced by Original Tractor Cab Co., Inc. It is not a genuine Honda OEM item. Honda, Honda Power Equipment, related logos, trademarks, and model names remain the property of their respective owners. Brand and model references on this page are used only to identify intended product fit.

Cab 9668 is designed to provide foul-weather protection only. It can help reduce direct exposure to normal blowing snow, sleet, and wind. The enclosure is not sealed, insulated, or heated.

This product will only help protect from weather elements, not impact or debris. Cab 9668 is not a safety enclosure, impact guard, debris shield, or operator-restraint system.

The cab will not protect the operator from moving augers, impellers, thrown objects, flying debris, collisions, engine exhaust, carbon monoxide, fire, hot surfaces, chemicals, noise, or other hazards.

Always follow the Honda operator manual and current Original Tractor Cab installation instructions. Keep every factory guard, shield, safety control, warning label, chute-clearing tool, and other safety device in place and in proper working condition.

Never cut, drill, weld, bend, remove, bypass, or alter a factory safety device to make the cab fit. Stop installation if any cab part interferes with a control, auger lever, drive lever, chute control, operator position, safety label, light, or required field of view.

The owner and operator must confirm correct product fit before installation and use. Replacement handles, controls, lights, engine parts, tires, tracks, and owner or dealer modifications may affect cab fit and clearance.

Cab 9668 fits only compatible Honda two-stage walk-behind snowblowers within the stated fit range. It does not fit Honda HSS models. Never force the enclosure onto a machine for which it was not designed.

Never place hands or feet inside the auger housing or discharge chute. Stop the engine, wait for all moving parts to stop, and follow Honda's approved chute-clearing procedure before removing an obstruction.

Keep cab material away from hot engine and exhaust parts. Stop using the enclosure if heat, exhaust, moving parts, or machine controls contact the cab.

Never operate a gasoline snowblower in a confined area. Engine exhaust contains carbon monoxide, which can cause serious injury or death. Operate outdoors with good ventilation and stop the engine at once if exhaust collects around the operator.

California Proposition 65 Warning

WARNING: Cancer and Reproductive Harm — www.P65Warnings.ca.gov.

This product, snowblower components, gasoline engine exhaust, fuels, oils, plastics, vinyl materials, metals, and related equipment may expose users to chemicals known to the State of California to cause cancer, birth defects, or other reproductive harm. Follow all product and equipment safety instructions. Also, provide proper ventilation, wash hands after handling applicable materials, and avoid unnecessary exposure.