Original Tractor Cab Sunshade 9440

A garden tractor can keep you in the sun for hours. That is especially true when you mow a large lawn or care for a larger property.

Original Tractor Cab Sunshade 9440 adds simple overhead cover. Therefore, the operator gets useful shade while the sides stay open for natural airflow.

The design is simple, strong, and easy to remove.

Sunshade 9440 Fit

The current Original Tractor Cab application lists Sunshade 9440 for John Deere 240, 245, 260, 265, 285, 320, 325, 335, 345, 355D, GX325, GX335, GX345, and GX355 garden tractors.

That broad fit range covers several generations of John Deere lawn and garden equipment. However, these tractors are now older machines.

Always check your exact model and current setup before ordering.

John Deere 240 Sunshade

Sunshade 9440 fits the John Deere 240 garden tractor. Deere built the 240 in Horicon, Wisconsin, from 1988 through 1992.

The 240 uses an open operator station. So, the driver has no factory roof to block direct overhead sun.

Adding Sunshade 9440 creates useful shade above the seat.

Shade for Long John Deere 240 Mowing Jobs

The John Deere 240 is a compact garden tractor made for lawn and property work. A long mowing job can still place the operator in direct sun for hours.

Therefore, a canopy can make summer work more pleasant. The open sides also let air move around the operator.

Keep the canopy away from low branches.

John Deere 245 Sunshade

Original Tractor Cab 9440 also fits the John Deere 245. Deere built this model during 1993 and 1994.

The 245 uses hydrostatic drive and an open operator station. As a result, the tractor works well for lawn care but gives the driver no overhead roof.

Sunshade 9440 adds that overhead coverage.

Open-Air Shade for the John Deere 245

A full enclosure is not always ideal during hot summer work. In contrast, Sunshade 9440 leaves the sides open.

Thus, the operator gets shade from above without closing in the seat area. Natural airflow can still pass around the driver.

That makes the design well suited to summer mowing.

John Deere 260 Sunshade

Sunshade 9440 fits the John Deere 260 garden tractor. Deere produced the 260 from 1988 through 1991.

This tractor uses a 17-horsepower Kawasaki engine and a six-speed gear transmission. It also has an open operator station.

Therefore, a model-fit canopy adds useful summer shade.

Shade Without Changing Tractor Controls

Sunshade 9440 mounts above the operator area. It does not change the engine, gearbox, mower deck, or normal drive system.

Instead, the product has one main job. It helps reduce direct overhead sun while you work.

Always check control clearance after installation.

John Deere 265 Sunshade

The John Deere 265 is another direct Sunshade 9440 application. Deere built the 265 from 1988 through 1994.

A 17-horsepower Kawasaki engine provides power. Meanwhile, a hydrostatic transmission gives the operator smooth travel-speed control.

The 9440 canopy adds shade above its open seat.

Useful Sun Protection for the John Deere 265

Hydrostatic drive makes the 265 easy to use around a lawn. Yet the open station still leaves the operator exposed to bright summer sun.

Sunshade 9440 helps reduce that direct overhead exposure. Moreover, its open sides keep the operator area from becoming a closed compartment.

Wear normal sun protection as needed.

John Deere 285 Sunshade

Original Tractor Cab 9440 fits the John Deere 285. Deere produced this garden tractor from 1987 through 1992.

The 285 uses an 18-horsepower liquid-cooled Kawasaki V-twin engine. It also uses hydrostatic drive.

A sunshade adds simple overhead cover to this capable older tractor.

Shade for a Classic John Deere Garden Tractor

Many John Deere 285 tractors remain useful because they were built for more than light mowing. Owners may still use them for lawn and property care.

However, the operator station remains open to the sun. So, Sunshade 9440 gives owners a simple way to add shade.

The shade can also come off without tools.

John Deere 320 Sunshade

Sunshade 9440 fits the John Deere 320 garden tractor. Deere produced the 320 from 1991 through 1994.

The 320 uses an 18-horsepower Kawasaki V-twin gasoline engine and hydrostatic drive. Like the related tractors, it has an open operator station.

Therefore, the canopy gives the driver useful overhead coverage.

Easy Shade for Summer John Deere 320 Work

The John Deere 320 can handle mowing and other compatible property tasks. Long summer jobs can also mean long periods in direct sunlight.

Sunshade 9440 places ripstop vinyl above the operator. At the same time, the open design lets air flow around the seat.

That balance makes it useful in warm weather.

Sunshade 9440 Also Fits Select John Deere 300 Series Tractors

The current Original Tractor Cab fit list goes beyond the six tractors in the product title. Sunshade 9440 also fits the John Deere 325, 335, 345, and 355D.

These later garden tractors continued the use of an open operator station. Consequently, the same basic need for overhead sun protection remained.

Confirm your exact model before purchase.

John Deere 325 Sunshade

Sunshade 9440 fits the John Deere 325. Deere produced this model from 1995 through 2001.

Engine design changed during its production life. Early tractors used a 17-horsepower Kawasaki single-cylinder engine, while later versions used an 18-horsepower Kawasaki V-twin.

The sunshade fit is based on the tractor application, not engine type.

John Deere 335 Sunshade

Original Tractor Cab lists the John Deere 335 as another Sunshade 9440 fit. The 335 uses hydrostatic drive and an open operator station.

Later versions use a 20-horsepower Kawasaki V-twin engine. In addition, this premium garden tractor offers power steering.

The canopy adds shade without enclosing the operator.

John Deere 345 Sunshade

Sunshade 9440 also fits the John Deere 345. This popular garden tractor uses a liquid-cooled Kawasaki V-twin engine.

Published engine ratings vary by production period. Therefore, use the serial number when buying engine parts.

Sunshade 9440 remains a listed canopy application.

John Deere 355D Sunshade

The John Deere 355D is the diesel model in this part of the 300 Series. Original Tractor Cab lists it as a Sunshade 9440 application.

A liquid-cooled Yanmar diesel provides power. Meanwhile, hydrostatic drive and power steering help make the tractor easy to operate.

The 9440 shade adds simple overhead sun cover.

Sunshade 9440 Fits Select John Deere GX Tractors

Current product fit also includes the John Deere GX325, GX335, GX345, and GX355. These machines followed the earlier 300 Series garden tractors.

The GX models kept the open operator layout. Therefore, overhead shade remains useful during warm-weather mowing.

Check attachment clearance before installation.

John Deere GX325 and GX335 Sunshade

Sunshade 9440 fits both the John Deere GX325 and GX335. These garden tractors were built for mowing and other property-care work.

The canopy gives the operator overhead shade without adding a closed weather cab. So, airflow can continue around the seat.

Keep the shade clear of trees and structures.

John Deere GX345 and GX355 Sunshade

The current fit list also includes the John Deere GX345 and diesel-powered GX355. Both models use hydrostatic drive.

The GX355 uses an 18-horsepower Yanmar diesel. In contrast, the GX345 uses a gasoline engine.

Sunshade 9440 provides the same basic overhead coverage on both applications.

Why Add a Sunshade to a John Deere Garden Tractor?

Direct sun can make a long mowing job feel much harder. Heat from the sun also falls directly on the operator when no roof is present.

A canopy places a layer of material between the operator and direct overhead sun. As a result, the seat area gets useful shade.

The sunshade does not replace sunscreen, proper clothing, water, or rest.

More Shade During Long Mowing Sessions

Large lawns can require hours of seat time. Therefore, overhead shade becomes more useful as the mowing job gets longer.

Sunshade 9440 covers the operator area from above. Meanwhile, the open sides help keep natural airflow around the seat.

Take regular breaks during hot weather.

Open Sides Help Air Move

A full cab is useful in cold or wet weather. However, a closed enclosure may not be the best choice for a hot summer day.

Sunshade 9440 leaves the sides open. Thus, air can move around the operator while the canopy provides shade from above.

Airflow will vary with wind and tractor speed.

13-Ounce Ripstop Vinyl Canopy

Original Tractor Cab makes the 9440 canopy from 13-ounce lightweight ripstop vinyl. The material is made for outdoor use.

Ripstop construction helps the vinyl resist ripping. In addition, the material resists mold and mildew.

Normal care will help the canopy last.

Strong Yet Lightweight Canopy Material

A tractor shade needs enough strength for outdoor use without adding needless weight above the operator. The 13-ounce vinyl helps meet both needs.

Still, the material is not damage proof. Therefore, keep sharp limbs and other objects away from the canopy.

Inspect the vinyl before each mowing season.

Resistance to Mold and Mildew

Outdoor equipment may get damp from dew or light moisture. The 9440 canopy material resists mold and mildew.

Even so, proper storage helps. Let wet material dry before placing the canopy in a closed area for a long period.

Clean the vinyl before seasonal storage.

16-Gauge Steel Sunshade Frame

A 16-gauge steel frame supports Sunshade 9440. This gives the vinyl canopy a firm structure above the operator.

The frame also helps the canopy keep its intended shape. Therefore, the steel support and ripstop vinyl work together as one shade system.

Check all frame parts before use.

Steel Frame Slips Out of the Receivers

Original Tractor Cab designed the frame for quick removal. The steel frame slips out of its receivers when you need to take the shade off.

As a result, removal does not need to become a long project. This can be useful for transport, storage, or work below low branches.

Secure the removed frame during storage.

No Holes to Drill During Normal Installation

Sunshade 9440 does not require drilling during normal installation. That helps keep installation simple and avoids needless permanent changes to the tractor.

Use the mounting points and hardware shown in the current instructions. Moreover, make sure each fastener is secure before operation.

Never drill into the tractor just to force a fit.

Check Older Tractors Before Installation

Some compatible tractors are more than 30 years old. So, a previous owner may have changed the seat, body panels, fenders, controls, or other equipment.

Those changes can affect fit. Therefore, inspect your tractor and compare it with the current Sunshade 9440 installation instructions.

Do not remove safety equipment to install the shade.

Tool-Free Sunshade Removal

Sunshade 9440 is easy to remove without tools. This feature makes the shade more useful on a tractor that handles many different jobs.

The vinyl canopy comes off for cleaning. Likewise, the steel frame can be removed from the receivers.

Recheck the mounting system after reinstalling the shade.

Remove the Shade for Low Branches

The canopy adds height above the operator. Therefore, branches that once passed over the tractor may strike the sunshade.

Remove the shade when you need to work below low limbs. Tool-free removal makes that task fast.

Never use the canopy to push branches away.

Remove the Shade for Open Transport

Transport speed creates much stronger wind than normal mowing. So, remove the shade before open transport when the product instructions call for removal.

Store the canopy and frame in a safe place during travel. Then, inspect all parts before the next installation.

Never use the canopy as a tie-down point.

29-Inch by 41-Inch Sunshade

Original Tractor Cab lists Sunshade 9440 at about 29 inches wide and 41 inches long. This size gives useful overhead coverage without making the canopy much larger than the tractor.

The shade focuses on the operator area. However, the sun moves throughout the day.

Direct light may still reach the operator from the sides.

Designed for Overhead Sun Protection

Sunshade 9440 is a canopy rather than a full enclosure. Its main purpose is to provide overhead shade.

Rain and wind can still reach the operator through the open sides. Therefore, owners who need cold-weather coverage should consider a compatible cab enclosure instead.

Choose the product that matches the job.

Sunshade 9440 Is Not Compatible With a Bagger

The current Original Tractor Cab product information states that Sunshade 9440 is not compatible with a bagger.

That fit limit matters because rear equipment can share mounting space with a sunshade system. So, do not force the two products together.

Confirm your tractor equipment before ordering.

Do Not Modify a Bagger or Sunshade to Force Fit

Cutting, drilling, bending, or removing parts can create an unsafe setup. Therefore, do not alter the bagger or shade just to make both fit.

Keep all factory guards and shields in place. Likewise, never remove tractor safety equipment for accessory clearance.

Use only an approved equipment setup.

Sunshade 9440 for Mowing

These John Deere tractors were built for lawn and garden work. As a result, mowing is one of the best uses for an open-sided sunshade.

The canopy helps block direct overhead sun while the tractor moves across the lawn. Meanwhile, open sides help the operator stay connected to the work area.

Always watch for trees and other overhead hazards.

Shade for Large Properties

A larger lawn can take hours to mow. Thus, reducing direct overhead sun can make the work period more pleasant.

Sunshade 9440 adds that coverage without needing electrical power. It also does not require an engine-driven fan.

The simple canopy works whenever it is installed.

Shade for Residential Lawn Care

A smaller yard can still expose the operator to strong midday sun. Therefore, the 9440 canopy can also make sense for normal residential mowing.

The compact shade fits above the operator while leaving the sides open. However, always allow enough clearance near trees and buildings.

Look above the tractor before entering tight areas.

Care for Your Sunshade 9440

Simple care helps protect the vinyl canopy. First, remove loose dust and dirt with clean water or a soft cloth.

Next, use mild soap when deeper cleaning is needed. Then, allow the vinyl to dry before long-term storage.

Avoid harsh solvents and abrasive cleaning tools.

Clean the Vinyl Canopy Gently

Rough brushes can mark or damage vinyl. So, use a soft cloth or sponge for normal cleaning.

Rinse away grit before wiping the surface. This simple step can reduce needless wear.

Let the canopy dry before folding or storage.

Inspect the Steel Frame

Check the frame, receivers, and mounting hardware from time to time. A loose part can move while the tractor is in use.

Therefore, correct loose or damaged hardware before mowing. Do not operate with a bent or damaged support.

Follow the installation instructions for proper adjustment.

One-Year Limited Warranty

Original Tractor Cab lists a one-year limited warranty for Sunshade 9440. This gives buyers support from the company that makes the product.

Warranty terms may change over time. So, review the current warranty at the time of purchase.

Keep your sales record after ordering.

Made by Original Tractor Cab

Sunshade 9440 is an aftermarket product made by Original Tractor Cab Co., Inc. It is not a genuine John Deere OEM product.

The listed John Deere names identify the tractors that the shade is made to fit. They do not mean that Deere & Company makes or endorses the product.

Original Tractor Cab manufactures operator weather products in the United States.

Sun Protection, Not Rollover Protection

The 16-gauge steel frame supports the canopy. It does not serve as a certified Roll-Over Protective Structure.

Likewise, the vinyl top is not a falling-object or debris shield. Therefore, never rely on Sunshade 9440 for accident protection.

The product is made for shade.

The Canopy Is Not a Debris Guard

A mower can throw stones, sticks, and other objects. Sunshade 9440 does not protect the operator from that debris.

Inspect the work area before mowing. In addition, keep all mower guards and shields installed.

Keep people and pets away from active mowing equipment.

Buy John Deere Sunshade 9440 Direct From Original Tractor Cab

Original Tractor Cab makes Sunshade 9440 for the listed John Deere garden tractors. Buying direct connects you with the company behind the product.

That can help when you need fit or installation support. Moreover, direct shopping makes it easy to compare other model-fit shade options.

Browse more John Deere tractor and mower sunshades for other model-fit products.

You can also view the full Original Tractor Cab sunshade collection for more canopy choices.

Before installation, check the Original Tractor Cab installation manual library for current product instructions.

For help with product fit, visit the Original Tractor Cab contact page before ordering.

John Deere 240 245 260 265 285 and 320 Specifications

The six John Deere models in the Sunshade 9440 product title span several years of garden tractor production. Deere built these machines in Horicon, Wisconsin.

They share a 47.9-inch wheelbase and open operator layout. However, engine power and transmission type vary by model.

Exact equipment can also vary by year and serial number.

John Deere 240 Specifications

John Deere built the 240 from 1988 through 1992. It is a two-wheel-drive garden tractor with manual steering and an open operator station.

A Kawasaki FC420V gasoline engine provides power. The air-cooled, single-cylinder engine has 422 cc, or about 25.8 cubic inches, of displacement.

Published output is 14 horsepower.

John Deere 240 Transmission

The John Deere 240 uses a six-speed gear transmission. Therefore, the operator selects a fixed gear to match travel speed to the job.

This differs from the hydrostatic 245. Still, both tractors share many parts and the same basic garden tractor layout.

Use the clutch and transmission as Deere directs.

John Deere 240 Size and Capacity

The 240 has a 47.9-inch wheelbase. Published operating weight ranges from about 590 to 680 pounds based on setup.

Fuel capacity is about 3 U.S. gallons. In addition, the tractor uses an independent mid PTO with an electric clutch.

These features support mowing and other compatible lawn work.

John Deere 245 Specifications

Deere built the John Deere 245 during 1993 and 1994. It uses the same basic 14-horsepower Kawasaki FC420V engine family as the 240.

Engine displacement is 422 cc. However, the 245 uses hydrostatic drive rather than a six-speed gear transmission.

That is a key difference between the two models.

John Deere 245 Hydrostatic Drive

Hydrostatic drive lets the operator change travel speed without selecting a normal fixed gear. As a result, speed control can be simple around trees and landscaping.

The 245 remains a two-wheel-drive tractor with manual steering. Published weight is about 610 pounds.

Fuel capacity is about 3 gallons.

John Deere 245 Attachments

John Deere offered compatible 38-inch and 46-inch mid-mount mower decks for the 245. Snowblower and blade equipment was also available.

Attachment fit can vary by setup. Therefore, use the tractor serial number when buying old equipment or service parts.

Sunshade 9440 is not compatible with a bagger.

John Deere 260 Specifications

John Deere produced the 260 from 1988 through 1991. A Kawasaki FC540V gasoline engine provides 17 horsepower.

The air-cooled, single-cylinder engine has 534 cc, or about 32.6 cubic inches, of displacement. It uses electric starting.

The tractor has a six-speed gear transmission.

John Deere 260 Drive System

The 260 uses two-wheel drive and manual steering. An independent mid PTO uses an electric clutch for compatible powered equipment.

Its wheelbase is 47.9 inches. Published tractor weight starts at about 605 pounds.

Fuel capacity is about 3 gallons.

John Deere 265 Specifications

Deere built the 265 from 1988 through 1994. It uses a 17-horsepower Kawasaki FC540V gasoline engine.

Displacement is 534 cc, or about 32.6 cubic inches. The engine is an air-cooled single-cylinder design.

Unlike the gear-drive 260, the 265 uses hydrostatic drive.

John Deere 265 Hydrostatic Transmission

The hydrostatic system lets the operator vary travel speed smoothly. Therefore, the 265 can work well where mowing requires frequent speed changes.

The tractor uses two-wheel drive and manual steering. Published weight ranges from about 630 to 755 pounds based on configuration.

Its wheelbase is 47.9 inches.

John Deere 265 PTO

The John Deere 265 uses an independent mid PTO with an electric clutch. This supports compatible mower and powered equipment.

A sleeve hitch was also available as optional equipment. Thus, the tractor could handle more than basic mowing.

Always match attachments to the exact tractor.

John Deere 285 Specifications

John Deere built the 285 from 1987 through 1992. This model moved to a larger liquid-cooled Kawasaki FD590V V-twin gasoline engine.

The two-cylinder engine has 585 cc, or about 35.7 cubic inches, of displacement. Published output is 18 horsepower.

The tractor uses hydrostatic drive.

John Deere 285 Liquid-Cooled Engine

Liquid cooling sets the 285 apart from the smaller air-cooled 240, 245, 260, and 265 engines. The cooling system helps manage heat during normal operation.

Therefore, radiator and cooling-system care matter. Keep cooling areas clean as the John Deere manual directs.

Never open a hot cooling system.

John Deere 285 EFI History

The John Deere 285 holds an interesting place in Deere garden tractor history. A fuel-injected version was offered for the 1989 model year.

That made the 285 an early example of electronic fuel injection in a John Deere lawn and garden tractor. Other 285 tractors use a carburetor.

Check the serial number and engine before ordering parts.

John Deere 320 Specifications

John Deere produced the 320 from 1991 through 1994. Although its model number places it in the 300 range, the tractor shares much with the late 200 Series.

A Kawasaki FD590V V-twin gasoline engine provides 18 horsepower. Displacement is 585 cc.

The tractor uses hydrostatic drive.

John Deere 320 Drive and PTO

The 320 uses two-wheel drive and manual steering. An independent front PTO uses an electric clutch.

Fuel capacity is about 3 gallons. The wheelbase is also about 47.9 inches.

Published equipment included mower, blade, and other garden tractor options.

John Deere 325 335 345 and 355D Specifications

Sunshade 9440 also fits four later John Deere 300 Series garden tractors. These models are the 325, 335, 345, and 355D.

Deere built these tractors in Horicon, Wisconsin. All use hydrostatic drive, but engine type and steering features vary.

The 355D is the diesel model.

John Deere 325 Specifications

John Deere produced the 325 from 1995 through 2001. Early tractors use a 17-horsepower, 534 cc Kawasaki single-cylinder gasoline engine.

Starting later in production, Deere also used an 18-horsepower, 493 cc Kawasaki V-twin. Therefore, engine parts must match the tractor year and serial number.

The 325 uses hydrostatic drive.

John Deere 335 Specifications

Later John Deere 335 tractors use a Kawasaki FH601V gasoline V-twin. The air-cooled engine has 675 cc of displacement and produces 20 horsepower.

The 335 uses hydrostatic drive. In addition, it offers power steering for easier control.

Sunshade 9440 fits above its open operator station.

John Deere 345 Specifications

John Deere built the 345 from 1995 through 2001. The tractor uses a liquid-cooled Kawasaki V-twin gasoline engine.

Published power differs by production period, with 18- and 20-horsepower versions appearing in model references. Therefore, use the tractor serial number for exact engine service data.

The 345 uses hydrostatic drive and power steering.

John Deere 355D Specifications

The John Deere 355D uses a Yanmar 2V78 diesel engine. This liquid-cooled, two-cylinder V-twin has 749 cc, or about 45.7 cubic inches, of displacement.

Published output is 18 horsepower. The tractor also uses hydrostatic drive, power steering, and wet disc brakes.

Fuel capacity is about 3.8 gallons.

John Deere GX325 GX335 GX345 and GX355

Original Tractor Cab also lists Sunshade 9440 for the GX325, GX335, GX345, and GX355. These models followed the earlier 300 Series machines.

The GX tractors use open operator stations and hydrostatic drive. However, engine and steering details vary by model.

Use the exact model when ordering service parts.

John Deere GX355 Diesel Specifications

The GX355 uses an 18-horsepower Yanmar 2V-78 diesel engine. This liquid-cooled two-cylinder engine has 749 cc of displacement.

The tractor uses hydrostatic drive, power steering, and wet disc brakes. Its wheelbase is about 49.25 inches.

Published operating weight is about 742 pounds.

Common Features Across Sunshade 9440 Tractors

These John Deere tractors span many years and several product families. However, they all use an open operator station.

That common layout is why a sunshade can add value across the group. The canopy places shade above the driver without enclosing the sides.

Sunshade 9440 is made for that role.

Gear and Hydrostatic Models

The John Deere 240 and 260 use six-speed gear transmissions. In contrast, the 245, 265, 285, 320, and later compatible models use hydrostatic drive.

Both designs work well for their intended jobs. Yet the operator controls speed in different ways.

Follow the John Deere manual for your exact tractor.

Gasoline and Diesel Models

Most tractors on the Sunshade 9440 fit list use gasoline engines. However, the 355D and GX355 use Yanmar diesel power.

Engine service needs differ greatly between gas and diesel machines. Therefore, never order engine parts from the sunshade fit list alone.

Use the tractor model and serial number.

John Deere Parts and Technical Support

These garden tractors have been in service for many years. So, correct model identification is important when you need factory parts.

For current parts lookup and genuine Deere service items, visit the official John Deere parts website .

For official manuals and technical publications, visit John Deere Technical Publications .

The History of Original Tractor Cab Company

Original Tractor Cab Company began in Indiana in 1939. The story started with a farmer named Stanley Williams.

Stanley needed better weather cover while using his own tractor. So, he designed a cab for it.

Other farmers soon wanted the same kind of protection.

A Practical Farm Idea Becomes a Business

The first Original Tractor Cab came from a real need. Farm work often had to continue when the weather became cold or wet.

An open tractor gave the operator little shelter. Therefore, Stanley's cab offered a simple answer to a common problem.

Other farmers quickly saw its value.

A Small Farm Magazine Ad Builds Demand

Stanley placed a small advertisement in a farming magazine. The response showed that many farmers shared the same need.

As demand grew, the idea became a manufacturing business. The company began making cabs for major tractor brands of that time.

Original Tractor Cab dates its beginning to 1939.

Original Tractor Cab During World War II

World War II changed the young company's work. During the war, Original Tractor Cab used its manufacturing skills for the war effort.

The company made canvas items and other needed goods. Afterward, it returned its focus to products for people who work outdoors.

New outdoor machines soon created new product needs.

Robert Williams Expands the Product Line

During the 1960s, Stanley's son Robert saw another problem. People using walk-behind snowblowers faced blowing snow and bitter wind.

Robert designed and patented a cab for walk-behind snowblowers. As a result, Original Tractor Cab moved into another part of the outdoor equipment market.

Lawn and garden tractor cabs followed.

Growth Into Lawn and Garden Equipment

Lawn and garden tractors became stronger and more useful. Owners could mow in summer and use other attachments during the year.

Therefore, Original Tractor Cab developed products for these smaller machines. The company was no longer focused only on large farm tractors.

Garden tractor products became an important part of its work.

Wayne Williams Develops a Tractor Sunshade

Cold-weather products had long been important to the company. However, outdoor operators also needed help during hot summer work.

In the early 1990s, Stanley's grandson Wayne Williams designed and patented a sunshade for tractors and lawn and garden equipment. Thus, the company expanded its focus into warm-weather operator comfort.

Sunshade 9440 carries that idea forward.

Three Generations of the Williams Family

Three generations of the Williams family helped guide Original Tractor Cab. Each generation added products as tractors and outdoor machines changed.

Still, the main idea stayed simple. Make practical products for people who spend time working outdoors.

That purpose remains part of the company today.

Made in the USA Since 1939

Original Tractor Cab remains based in Arlington, Indiana. Its history now spans more than eight decades.

Today, the company makes hardtop cabs, soft weather enclosures, tractor sunshades, mower sunshades, snowblower cabs, and related accessories.

Sunshade 9440 is part of that American manufacturing story.

From Stanley's Tractor Cab to Sunshade 9440

The equipment has changed greatly since Stanley Williams made his first tractor cab. Yet operators still need protection from outdoor conditions.

Sunshade 9440 applies the company's long history to John Deere lawn and garden tractors. Instead of enclosing the operator for winter, this product provides simple overhead shade for warm-weather work.

Learn more on the Original Tractor Cab company history page .

John Deere Sunshade 9440 Frequently Asked Questions

Which John Deere tractors fit Sunshade 9440?

The current Original Tractor Cab fit list includes John Deere 240, 245, 260, 265, 285, 320, 325, 335, 345, 355D, GX325, GX335, GX345, and GX355 garden tractors.

Does Sunshade 9440 fit the John Deere 240?

Yes. Original Tractor Cab lists the John Deere 240 as a direct Sunshade 9440 application.

Does Sunshade 9440 fit the John Deere 245?

Yes. Sunshade 9440 fits the John Deere 245 garden tractor.

Does Sunshade 9440 fit the John Deere 260?

Yes. The John Deere 260 is included in the current Sunshade 9440 fit list.

Does Sunshade 9440 fit the John Deere 265?

Yes. Original Tractor Cab lists the John Deere 265 as a compatible model.

Does Sunshade 9440 fit the John Deere 285?

Yes. Sunshade 9440 fits the John Deere 285 garden tractor.

Does Sunshade 9440 fit the John Deere 320?

Yes. The John Deere 320 is a direct Original Tractor Cab 9440 application.

Does Sunshade 9440 fit the John Deere 325, 335, 345, and 355D?

Yes. The current Original Tractor Cab product page lists all four of these John Deere 300 Series tractors as compatible with Sunshade 9440.

Does Sunshade 9440 fit GX Series tractors?

Yes. Current fit includes the John Deere GX325, GX335, GX345, and GX355.

Does Sunshade 9440 work with a bagger?

No. Original Tractor Cab states that Sunshade 9440 is not compatible with a bagger.

What is Sunshade 9440 made from?

The shade uses a 16-gauge steel support frame and a 13-ounce lightweight ripstop vinyl canopy.

Does the canopy resist mold and mildew?

Yes. Original Tractor Cab describes the vinyl as resistant to mold, mildew, and ripping.

What size is Sunshade 9440?

Original Tractor Cab lists the canopy at about 29 inches wide by 41 inches long.

Does Sunshade 9440 require drilling?

No. Normal installation does not require drilling new holes into the tractor.

Can Sunshade 9440 be removed without tools?

Yes. The sunshade is designed for quick tool-free removal. The steel frame slips out of the receivers.

Can the vinyl canopy be removed for cleaning?

Yes. Original Tractor Cab designed the vinyl canopy for quick removal, which makes normal cleaning easier.

Should I remove the sunshade around low branches?

Yes. The sunshade increases tractor height. Remove it when needed before mowing under low limbs or other overhead objects.

Is Sunshade 9440 a full rain enclosure?

No. Sunshade 9440 is an open-sided canopy. It is designed mainly for overhead shade rather than full rain, snow, sleet, or wind protection.

Does Sunshade 9440 provide rollover protection?

No. The steel frame supports the canopy only. It is not a certified Roll-Over Protective Structure.

Does Sunshade 9440 protect against falling objects or mower debris?

No. The product is not a certified falling-object, impact, or debris protective structure.

Is Sunshade 9440 a genuine John Deere OEM product?

No. Sunshade 9440 is an aftermarket product manufactured by Original Tractor Cab Co., Inc.

What warranty comes with Sunshade 9440?

Original Tractor Cab currently lists a one-year limited warranty for Sunshade 9440.

Non-OEM and Liability Disclaimer

This is an aftermarket product produced by the Original Tractor Cab Co. Inc., it is not a genuine OEM item. This product will only protect from elements not rollover or debris.

Original Tractor Cab Co., Inc. is not affiliated with, sponsored by, or endorsed by Deere & Company. John Deere, Deere, related logos, trademarks, and model names remain the property of their respective owners. Brand and model references are used only to identify intended product compatibility.

Sunshade 9440 is intended for compatible John Deere 240, 245, 260, 265, 285, 320, 325, 335, 345, 355D, GX325, GX335, GX345, and GX355 tractors as currently listed by Original Tractor Cab. The owner must confirm the exact model, configuration, attachments, and installed equipment before purchase and installation.

Sunshade 9440 is not compatible with a bagger. Do not modify the shade, bagger, tractor, factory guards, or safety equipment in an attempt to create an unapproved fit.

This product is designed mainly to provide overhead shade from direct sun. It does not form a full weather enclosure and is not designed or certified to provide rollover, collision, impact, debris, or falling-object protection.

Sunshade 9440 is not a Roll-Over Protective Structure, Falling Object Protective Structure, collision-protection device, impact guard, debris shield, or operator-restraint system.

Always follow the John Deere operator manual and the current Original Tractor Cab installation instructions. Keep all factory guards, shields, warning labels, controls, switches, interlocks, and other safety equipment in place and in proper working condition.

Stop installation if any sunshade part interferes with a tractor control, operator exit, safety device, engine component, exhaust system, PTO, mower deck, attachment, or required field of view.

Many tractors on this fit list have been in service for decades. Replacement seats, engines, body parts, controls, tires, baggers, mower decks, owner modifications, and other equipment may affect fit or clearance.

The sunshade increases the tractor's overall height. Check clearance around garage doors, sheds, trailers, tree limbs, signs, and other overhead objects before operation.

Remove the shade when needed for low branches, transport, or storage. Never use the canopy or frame to push branches or other objects out of the way.

Do not use the sunshade frame or canopy as a cargo rack, lifting point, towing point, tie-down point, handhold, attachment mount, or protective safety structure.

California Proposition 65 Warning

WARNING: Cancer and Reproductive Harm — www.P65Warnings.ca.gov.

This product and the equipment on which it is installed may expose users to chemicals known to the State of California to cause cancer, birth defects, or other reproductive harm. Possible sources may include engine exhaust, gasoline, diesel fuel, oils, batteries, plastics, vinyl, metals, electrical parts, and other equipment components. Follow all product and equipment safety instructions. Use proper ventilation, wash hands after handling applicable materials, and avoid unnecessary exposure.