Sun Protection for John Deere Gator Utility Vehicles

Shade for Long Days Outdoors

A Gator can help you move tools, soil, mulch and yard supplies. Yet the sun may beat down as you work. So, a roof shade can make the ride more pleasant.

Sunshade 9565 adds cover above the operator area. The vinyl roof helps block direct sunlight. Also, its wide shape helps shade the seating area.

The shade does not cool the air. However, it can cut direct sun exposure from above. So, you can work with more shade on bright days.

Black Mesh Rear Screen

Sunlight can reach your back while you drive. So, Sunshade 9565 has a black mesh screen at the rear.

The screen helps block some direct sun from behind. Yet the mesh lets air pass through the panel.

Also, the mesh helps keep the rear area more open than a solid panel. Always check your rear view before you move.

Shade for the Operator and Passenger

The 52-inch width helps cover the Gator seating area. So, both the operator and passenger can gain shade.

However, the sun can still reach the seats from the sides and front. Wear sun-safe clothing as needed.

Light Rain Protection

The vinyl roof resists water. So, it may help shed light rain from above.

Yet this sunshade has open sides and no windshield. Wind-driven rain, snow and sleet can still reach the seats.

Also, the sunshade is not a full cab enclosure. It does not seal out cold wind or harsh winter weather.

Sunshade Safety in Wind and Storms

Strong wind can place force on the roof. So, avoid use in severe storms.

Large hail and flying debris can cause harm. Therefore, stop work and seek safe shelter when storms move in.

The sunshade is not a roll bar, safety cage or falling object guard. Never rely on it for impact protection.

John Deere Gator Sunshade 9565 Features

40-Inch by 52-Inch Vinyl Roof

Sunshade 9565 has a roof that measures 40 inches long and 52 inches wide. So, it adds broad shade above the seating area.

The cover helps block direct sunlight. Also, it helps shed light rain from above.

16-Gauge Tubular Steel Frame

A steel frame gives the sunshade its shape. The 16-gauge tubular steel helps support the vinyl roof.

So, the shade has a firm base for normal use. Yet the frame is not a safety structure.

13-Ounce Ripstop Vinyl Cover

The roof uses 13-ounce ripstop vinyl. This material is light yet tough.

It resists water, mildew, rot and tearing. Also, the maker lists fire resistance as a material feature.

So, the cover can serve many outdoor jobs. Still, keep it clear of flames, hot exhaust and sharp tools.

Black Rear Mesh Sun Screen

The rear screen adds shade behind the seats. So, it helps block direct sun from your back.

Meanwhile, the mesh lets air pass through. This helps keep the rear panel more open.

No Holes to Drill

Sunshade 9565 does not need new holes for standard mounting. So, installation avoids drilling into the Gator frame.

Use the supplied mount parts and follow the product guide. Also, check the full Gator model before you start.

Tool-Free Sunshade Removal

You can remove the sunshade without tools after proper installation. So, you can take it off when needed.

The quick removal design helps with storage and some transport needs. Yet you must follow the product guide each time.

One-Year Limited Warranty

Original Tractor Cab offers a one-year limited warranty on Sunshade 9565. So, review the full warranty terms before purchase.

John Deere 4x2 and 6x4 Gator Sunshade Fit

Fits John Deere 4x2 Gators with Steel Cargo Beds

Sunshade 9565 fits the John Deere 4x2 Gator with a steel cargo box or bed.

So, owners of these Gators can add shade above the operator area. Check the bed type before purchase.

Fits John Deere 6x4 Gators with Steel Cargo Beds

The same sunshade also fits the John Deere 6x4 Gator with a steel cargo box or bed.

The 6x4 uses six wheels for work on farms and large grounds. So, shade can be useful during long outdoor tasks.

Does Not Fit Deluxe Cargo Boxes

Sunshade 9565 does not fit Gators with the Deluxe Cargo Box. So, check the bed before you order.

A steel cargo bed and a Deluxe Cargo Box are not the same. Also, bed style can affect the mounting points.

Confirm Your Gator Before Purchase

Check the model name and serial number. Then, look at the cargo bed style.

The product fit list names 4x2 and 6x4 Gators with steel cargo beds. So, do not assume it fits a new XUV or HPX model.

Check the Sunshade Mounting Area

Added racks, lights and other parts may affect sunshade fit. So, inspect the mount area before you install.

The shade must not block steering, pedals, controls or safe entry and exit.

John Deere Gator Sunshade 9565 Installation and Care

Read the Sunshade Installation Guide

Start with the full product guide. Then, lay out the steel frame, vinyl cover and hardware.

Follow each mount step in order. Also, make sure the frame sits in the correct place.

View our Original Tractor Cab sunshade installation manuals for setup and care information.

Install Without Drilling

The standard mount design needs no new holes. So, use the correct parts for your Gator.

Do not alter the Gator frame or safety parts to force a fit. Also, check all hardware before use.

Check the Roof and Rear Screen

The vinyl roof should sit in the right place on the frame. Also, the rear mesh screen should hang as the guide directs.

So, inspect both panels after installation. Keep the screen clear of moving cargo bed parts.

Clean the Ripstop Vinyl

Dust and dirt can build up on the roof. So, clean the vinyl with mild soap and water.

Use a soft cloth or sponge. Also, rinse well and let the cover dry.

Care for the Rear Mesh Screen

The mesh screen can catch dust and loose dirt. So, clean it with care.

Avoid sharp tools and rough brushes. Also, check the screen for tears before use.

Remove the Sunshade for Storage

Sunshade 9565 can come off without tools. So, remove it when the guide calls for storage or transport.

Store the cover in a clean, dry place. Also, keep sharp items away from the vinyl.

Check the Frame and Mounts

Vibration can loosen hardware over time. So, check the frame and mounts from time to time.

Tighten parts as the guide directs. Also, replace worn or damaged parts before use.

Buy John Deere Gator Sunshade 9565 Direct

Original Tractor Cab makes Sunshade 9565 for select John Deere 4x2 and 6x4 Gators. So, you can buy direct from the maker.

Our team can help with sunshade fit and installation questions. Plus, you can find more weather covers on our site.

Browse our John Deere tractor and utility vehicle sunshades for more model-fit choices.

If your Gator has a Deluxe Cargo Box, see our John Deere Gator T Series Sunshade 30447 . Check its fit list before purchase.

You can also view our Universal Jumbo ROPS Sunshade for compatible machines with the right ROPS setup.

Ready for more shade on bright workdays? Choose Sunshade 9565 and order direct from Original Tractor Cab.

John Deere 4x2 and 6x4 Gator Utility Vehicle Specifications

John Deere Gator utility vehicles help move people, tools and supplies. The 4x2 and 6x4 models have served farms, grounds crews and property owners.

Yet engine size, fuel type and cargo capacity can vary by model and year. So, use the exact Gator manual for service and load limits.

John Deere 4x2 Gator Design

The 4x2 Gator has four wheels. It uses two front wheels and two rear wheels for travel and hauling.

The rear cargo bed helps carry tools, feed, mulch and other supplies. So, the Gator can serve many daily tasks.

John Deere 4x2 Gator Engine

Traditional John Deere 4x2 Gators use small gas engines. Engine size and power vary by model year.

For example, the later Gator TS 4x2 uses a 350 cc single-cylinder gas engine. John Deere lists 11.3 gross horsepower for that model.

However, the TS 4x2 is not the same as every older 4x2 Gator. So, check your own model before using those figures.

John Deere 4x2 Gator Transmission

Many traditional 4x2 Gators use a continuously variable transmission, or CVT. So, the vehicle can change speed without manual gear shifts.

The drive system helps with slow work near barns, yards and sheds. Also, it can make stop-and-go work easier.

John Deere 4x2 Gator Cargo Bed

The steel cargo bed is key to Sunshade 9565 fit. So, check the bed before you order.

The later Gator TS 4x2 has a steel bed with a 500-pound load rating. Yet older 4x2 Gators may have different limits.

John Deere 6x4 Gator Design

The 6x4 Gator has six wheels. It uses two front wheels and four rear wheels for travel and work.

This layout helps spread the load over more rear tires. So, the 6x4 can serve many farm and grounds jobs.

John Deere 6x4 Gator Engine

John Deere made 6x4 Gators with more than one engine type. Some use gas, while others use diesel.

So, engine size and power depend on the exact model. Check the serial number and engine tag for the right service data.

John Deere 6x4 Gator Transmission

Traditional 6x4 Gators use a utility vehicle drive system for hauling and grounds work. Many use a CVT-style transmission.

So, the operator can vary speed for the job. Yet drive details vary by model and year.

John Deere 6x4 Gator Steel Cargo Bed

The 6x4 Gator can carry tools and supplies in its rear bed. So, it serves many jobs on farms and large grounds.

Sunshade 9565 fits listed 6x4 Gators with steel cargo beds. However, it does not fit the Deluxe Cargo Box.

John Deere Gator Differential Lock

Many Gator models have a rear differential lock. This feature can help when one drive wheel loses grip.

So, it may help on loose or slick ground. Yet use it only as the Gator manual directs.

John Deere Gator Brakes

Gator brake systems vary by model and year. So, check the exact service manual.

The brakes must work well before you drive. Also, keep the parking brake in good shape.

John Deere Gator Tires and Ground Clearance

Gator tires help the vehicle move on grass, dirt and other ground. Tire size varies by model and year.

So, check tire pressure and tread before work. Also, watch for rocks, ruts and low branches.

John Deere Gator Towing and Payload

A Gator can help haul and tow loads. Yet each model has its own load limits.

So, check the operator manual before towing or loading the cargo bed. Also, keep heavy loads low and secure.

Official John Deere 4x2 Specifications

John Deere lists engine, transmission, cargo bed and drive details for its Gator TS 4x2. So, review the official John Deere Gator TS 4x2 specifications for that later model.

Official John Deere Gator Parts and Model Data

John Deere also lists parts for traditional 4x2 and 6x4 Gators. So, use the official John Deere parts compatibility reference to help identify older Gator model families.

The parts page is not a Sunshade 9565 fit guide. So, use the Original Tractor Cab product fit list before you order.

Original Tractor Cab Company History Since 1939

A Farmer's Idea in 1939

Original Tractor Cab began in 1939. At that time, farmer Stanley Williams needed more cover from harsh weather while he worked.

So, Stanley made a cab for his own tractor. It helped shield him from rain, wind and cold.

Other farmers soon saw his new cab. They too had to work in bad weather.

As a result, they asked for the same kind of cover. That first cab became the start of Original Tractor Cab Co., Inc.

From One Cab to a Family Business

Stanley knew how hard farm work could be. He also knew how cold and wet the job could feel.

So, he kept making useful cab designs. More farmers saw the value of weather cover.

As demand grew, the company grew as well. Yet its main goal stayed much the same.

Help people work with less harsh weather on their bodies.

Original Tractor Cab During World War II

World War II brought new needs for goods and supplies. So, Original Tractor Cab changed its work to help the war effort.

The company made backpacks and other needed military goods. This work showed the range of its manufacturing skills.

After the war, the company went back to making weather covers for farm and outdoor work.

New Cabs for Lawn and Garden Equipment

Outdoor machines changed as the years went by. Lawn tractors and snowblowers became more common.

So, Original Tractor Cab added new products for these machines. The company grew beyond its first farm tractor cabs.

More homeowners and grounds crews could now add weather cover to the machines they used.

Sunshades for Warm Weather Work

Cold weather was not the only concern. Hot sun could also make long days hard.

So, the company added sunshades to its product range. These shades help block direct sun from above.

As a result, Original Tractor Cab could help more operators through the year.

Three Generations of American Manufacturing

The Williams family carried the company forward through three generations. Each generation brought new ideas and products.

Yet the core goal stayed the same. Make useful weather covers for people who work outdoors.

Today, the company makes hardtop cabs, soft enclosures, sunshades and cab parts. Plus, its products serve many types of outdoor equipment.

Made in Arlington, Indiana

Original Tractor Cab is based in Arlington, Indiana. We take pride in our long history of American manufacturing.

Our products help farmers, homeowners and grounds crews work with more comfort. So, we keep making weather covers for the machines they use.

Sunshade 9565 Carries on the Tradition

The John Deere Gator came long after Stanley made his first cab. Yet the need for weather cover remains.

Sun still shines on long workdays. Heat can still make outdoor jobs feel hard.

So, Sunshade 9565 brings that same basic idea to select John Deere Gator utility vehicles.

Learn more about our family roots on the Original Tractor Cab company history page .

Original Tractor Cab – Made RIGHT in USA Since 1939!

John Deere Gator Sunshade 9565 FAQs

What Gators fit Sunshade 9565?

Sunshade 9565 fits John Deere 4x2 and 6x4 Gators with steel cargo boxes. Check the bed style before you order.

Does Sunshade 9565 fit a Deluxe Cargo Box?

No. Sunshade 9565 does not fit the Deluxe Cargo Box. It fits listed Gators with steel cargo beds.

How large is Sunshade 9565?

The sunshade is 40 inches long and 52 inches wide. So, it adds shade above the seats.

Does the sunshade have a rear screen?

Yes. A black mesh screen hangs at the rear. It helps shade the operator's back while letting air pass through.

What material is the sunshade roof?

The roof uses 13-ounce ripstop vinyl. It resists water, mildew, rot and tearing.

Does the frame use steel?

Yes. The frame uses 16-gauge tubular steel. It helps hold the vinyl roof in place.

Must I drill holes to install it?

No. Standard installation needs no drilling. Follow the sunshade guide for the correct mount steps.

Can I remove the sunshade without tools?

Yes. Sunshade 9565 can come off without tools. Follow the product guide for removal and storage.

Does the sunshade protect from snow and wind?

The roof may help shed light rain. Yet the open sides do not block cold wind, snow or sleet.

Is this a genuine John Deere OEM sunshade?

No. Original Tractor Cab makes this aftermarket sunshade. It is not a genuine John Deere OEM item.

Order Your John Deere Gator Sunshade 9565

Bright sun can make a long workday feel hot. So, add shade above your Gator seats.

Sunshade 9565 has a tough vinyl roof, steel frame and black rear mesh screen. Plus, it needs no drilling for standard installation.

If you own a John Deere 4x2 or 6x4 Gator with a steel cargo bed, choose Sunshade 9565 for more sun protection.

Buy direct from Original Tractor Cab. We make our products in the USA and have served outdoor workers since 1939.

Non-OEM, Safety and Liability Disclaimers

Aftermarket and Non-OEM Product Disclaimer

This is an aftermarket product produced by Original Tractor Cab Co., Inc. It is not a genuine John Deere OEM item. Original Tractor Cab Co., Inc. is not affiliated with, sponsored by or endorsed by Deere & Company.

John Deere, Gator, 4x2, 6x4 and related model names are trademarks or product identifiers of their respective owners. We use those names only to identify compatible equipment.

Operator Safety and Liability Disclaimer

This sunshade provides limited sun and light weather cover only. It is not a rollover protective structure (ROPS), falling object protective structure (FOPS), collision guard, debris shield or certified safety enclosure.

This product will only help protect from weather elements, not rollover, collision, falling objects, flying debris or other hazards. Never rely on the sunshade to prevent injury or death.

Always follow the John Deere operator manual and Original Tractor Cab installation guide. Keep all factory guards and safety devices in place. Never remove or alter factory safety equipment to install the sunshade.

The sunshade changes the vehicle's height and may affect sight lines. So, check all clearances before use. Also, make sure the frame does not block steering, pedals, controls, cargo bed travel or safe entry.

Strong wind, storms, large hail and flying debris can cause harm. Stop work and seek safe shelter when severe weather moves in.

Follow the product guide before transport on an open truck or trailer. Remove the sunshade when the guide directs.

California Proposition 65 Warning

WARNING: Cancer and Reproductive Harm. www.P65Warnings.ca.gov .