John Deere Lawn Tractor Sunshade for L, LA100 and D100 Series Mowers

Mowing often takes place during warm and sunny weather. Yet an open lawn tractor puts the operator in direct sunlight for much of the job.

A large yard can mean hours in the sun. Likewise, repeated mowing through the summer can add many more hours of exposure.

Original Tractor Cab Sunshade 30212 puts a canopy above the operator. As a result, it helps reduce direct overhead sun during normal lawn and property care.

Fits a Wide Range of John Deere Lawn Tractors

Original Tractor Cab markets Sunshade 30212 for compatible John Deere L, LA100, and D100 Series lawn tractors. Dealer fit data also gives a more detailed list of compatible machines.

Listed L Series models include the L100, L108, L111, L118, L120, and L130. Compatible 100 Series machines include the 102, 115, 125, 135, 145, 155C, and 190C.

Dealer information also lists the LA100, LA110, LA120, LA130, LA140, and LA150. In addition, Sunshade 30212 is listed for the John Deere D100 Series.

Check Your Exact Model Before You Order

John Deere produced several generations of these lawn tractors. Therefore, model names and mounting points can vary.

A used mower may also have owner-added equipment. For example, a prior owner may have installed a bagger, different seat, rear attachment, or other part.

Always check the actual tractor before ordering. If fit is not clear, contact Original Tractor Cab with the complete model information.

Not Compatible With a Bagger

Dealer product information gives an important fit warning for Sunshade 30212. The sunshade is not compatible with a bagger.

Therefore, do not assume that the shade and rear bagging system can be used together. Their mounting areas or operating space may conflict.

If your John Deere has a bagger, confirm the correct product setup before buying or installing Sunshade 30212.

13-Ounce Ripstop Vinyl Sunshade Top

The Sunshade 30212 top uses lightweight 13-ounce ripstop vinyl. This material creates a broad shaded area without adding a heavy roof over the mower.

Ripstop construction helps resist tearing. In addition, dealer product data states that the material resists mold and mildew.

Good care still matters. Keep sharp tools, limbs, and other objects away from the vinyl.

Shade From Direct Summer Sun

Direct sun can make mowing less pleasant on a hot day. So, Sunshade 30212 places its vinyl top above the operator.

The top blocks a large part of the direct sunlight that would otherwise reach your head and upper body. Meanwhile, the sides remain open for natural airflow.

Sun can still enter from the sides. Therefore, continue to use sunscreen, proper clothing, eye protection, and other sun-safety measures.

Approximately 29 Inches Wide by 41 Inches Long

Dealer product information lists the Sunshade 30212 canopy at about 29 inches wide and 41 inches long. This size provides useful overhead coverage for the operator area.

Actual shade changes as the sun moves across the sky. For example, low morning or evening sun may reach the operator from the side.

Even so, the canopy can greatly reduce direct overhead sun during bright daytime mowing.

Strong 16-Gauge Steel Frame

A canopy needs a firm frame. Therefore, Original Tractor Cab uses 16-gauge steel to support the Sunshade 30212 vinyl top.

The frame holds the shade above the operator while the mower remains open at the front and sides. As a result, you gain shade without adding a full cab.

Inspect the frame and mounting hardware during the mowing season. Tighten loose parts as the installation instructions direct.

No Holes to Drill

Permanent changes to a lawn tractor are not always desirable. For that reason, Sunshade 30212 is designed for normal installation without drilling holes.

The mounting system uses the tractor structure and the supplied sunshade hardware. Thus, installation does not require you to drill the mower for normal fit.

Never drill, cut, weld, or alter a tractor safety part just to make the sunshade fit.

Removes Without Tools

A sunshade adds height to a riding mower. That extra height can matter below tree limbs, garage doors, or low storage areas.

Fortunately, dealer product information states that Sunshade 30212 can be removed without tools after the initial installation. So, temporary removal can be quick.

Always stop the tractor before removing or installing the sunshade. Then, follow the current product instructions.

Removable Vinyl Cover for Easy Cleaning

Grass dust and pollen can collect on a mower canopy. Therefore, easy cleaning is useful during the mowing season.

The Sunshade 30212 vinyl cover can be removed from the frame. This makes it easier to wash and dry the material.

Use mild soap and clean water. Also, let the cover dry before long-term storage.

Open-Air Shade for Warm Weather

A full cab and a sunshade solve different problems. An all-weather cab can surround much of the operator, while Sunshade 30212 keeps the mower open.

That open design works well in summer. Air can move around the operator as the top provides shade.

Therefore, this product is best viewed as a warm-weather canopy rather than a full weather enclosure.

Some Overhead Cover From Light Rain

The vinyl top sits directly above the operator. So, it may provide some overhead cover if a light rain begins.

However, the front and sides remain open. Wind can also push rain beneath the canopy.

Sunshade 30212 is not an all-weather rain cab. Stop mowing when wet turf, lightning, wind, or poor visibility makes operation unsafe.

Not a Snow or Sleet Enclosure

A sunshade does not surround the operator. Therefore, it cannot provide the type of winter coverage offered by a full enclosure.

Snow and sleet can easily enter through the open sides. Cold wind also moves through the operator area.

Choose a compatible full enclosure when winter weather protection is the main goal.

Useful Shade for Large Lawns

A small yard may take only a short time to mow. By contrast, a large property can keep the operator on a lawn tractor for hours.

Sunshade 30212 can make those long mowing sessions more pleasant by reducing direct overhead sun. In turn, the operator keeps the open view and airflow of the tractor.

The shade does not change how the mower should be driven. Always operate at a safe speed for the lawn and terrain.

Useful for Home and Property Care

John Deere L, LA100, and D100 Series tractors do more than cut grass. Depending on the exact model and approved attachments, owners may also tow carts, spreaders, aerators, and other lawn equipment.

Many of those jobs happen in sunny weather. Therefore, a canopy can provide useful shade during more than mowing.

Always follow the tractor and attachment limits. Sunshade 30212 does not increase towing or load capacity.

Check Overhead Clearance Before You Mow

The canopy sits well above the mower seat. As a result, total tractor height increases after installation.

Low branches that once cleared your head may now strike the sunshade. Likewise, garage doors and sheds may have less clearance than expected.

Measure the finished mower after installation. Then, check the route before driving into a low area.

Remove the Shade for Low Branches

Dealer product information notes that Sunshade 30212 removes quickly for mowing below low branches. This can help protect the shade when clearance is limited.

Stop the tractor on safe, level ground before removal. Next, shut off the engine and follow the installation instructions.

Never try to remove or adjust the canopy while the mower is moving.

Remove the Vinyl Cover or Sunshade for Open Transport

The Original Tractor Cab 30212 manual gives an important transport warning. Remove the vinyl cover or complete sunshade before transporting the mower on an open truck or trailer.

Road-speed airflow is far stronger than normal lawn tractor travel. Therefore, leaving the cover installed can damage the vinyl, frame, or mounting parts.

After transport, reinstall the sunshade as the instructions direct. Also, inspect all mounting hardware before use.

Sunshade 30212 Is Not a Safety Structure

The steel frame supports the vinyl canopy. It does not provide certified rollover protection.

Original Tractor Cab also warns that the sunshade will not protect the operator from injuries caused by rollover, collision, or other accidents. Therefore, never treat the frame as a roll bar.

The canopy also does not protect against thrown mower debris, falling limbs, or other impacts.

Do Not Use the Frame as a Handhold

The sunshade frame was designed to hold the canopy. It was not designed as a grab bar for getting on or off the tractor.

So, use only the tractor's approved hand and foot locations. Never pull your body weight against the sunshade frame.

Likewise, do not use the frame as a lifting, towing, or tie-down point.

Do Not Carry Cargo on the Sunshade

A canopy is not a roof rack. Therefore, never strap tools, lumber, ladders, bags, or other cargo to Sunshade 30212.

Extra weight can damage the vinyl and frame. It can also add weight high above the mower.

Use only tractor locations and attachments approved for carrying or towing loads.

One-Year Limited Warranty

Dealer product information lists a one-year limited warranty for Sunshade 30212. The current written warranty terms and exclusions still apply.

Keep your proof of purchase. In addition, install and use the shade as the instructions direct.

Misuse, accident damage, improper installation, or unauthorized changes may affect warranty coverage.

Buy John Deere Sunshade 30212 Direct From Original Tractor Cab

Original Tractor Cab manufactures Sunshade 30212. Therefore, buying direct connects you with the company behind the product.

That direct connection can help with model fit, installation questions, and replacement parts. It can be especially useful with older John Deere lawn tractors that may have changed through years of use.

Browse more John Deere sunshades from Original Tractor Cab for other model-fit shade products.

You can also explore Original Tractor Cab sunshades and canopies for other outdoor equipment.

Before installation, visit the Original Tractor Cab installation manual library for current product instructions.

Need help with model fit? Use the Original Tractor Cab contact page before you order.

John Deere L, LA100 and D100 Series Lawn Tractor Specifications

Sunshade 30212 fits several generations of John Deere lawn tractors. Therefore, there is no single engine, deck, transmission, size, or weight specification for every compatible machine.

The L Series came first among the main families covered here. Later, the LA100 and D100 Series continued Deere's line of residential lawn tractors.

Exact specifications vary by model and production year. So, always use the model and serial number when ordering mower parts or checking service data.

John Deere L100 Series Specifications

John Deere L100 Engine and Transmission

John Deere lists a Briggs & Stratton single-cylinder engine for the L100. Published output is 17 horsepower.

Engine displacement is 508cc, or about 31 cubic inches. The L100 uses a five-speed gear transaxle rather than a hydrostatic drive.

Deere lists first gear at about 1.5 mph. Fifth gear reaches about 5 mph, while reverse speed is about 2.3 mph.

John Deere L110 Specifications

The L110 uses a Kohler CV491 single-cylinder engine. John Deere lists output at 17.5 horsepower.

Displacement is 490cc, or about 29.9 cubic inches. Unlike the gear-drive L100, the L110 uses a hydrostatic Tuff Torq K46 transaxle.

Published forward speed reaches about 5.7 mph. Reverse travel reaches about 3.4 mph.

John Deere L118 Specifications

John Deere lists a 20-horsepower Briggs & Stratton engine for the L118. Published displacement is 656cc, or about 40 cubic inches.

The larger engine gives the L118 more power than the L100 and L110 in the referenced Deere specifications.

The L118 also uses an automatic hydrostatic drive. Therefore, travel speed can change without shifting through fixed gears.

L Series Fuel Capacity

John Deere lists a fuel capacity of about 2.1 gallons for the L100, L110, L118, L120, and L130 in the referenced operator manual.

These tractors use gasoline engines. So, use the fuel type and grade listed in the operator manual for the exact machine.

Never refuel a hot or running engine.

L Series Dimensions

John Deere lists an overall height of about 38.6 inches for the referenced L Series tractors. Overall length is about 60 inches.

Published tractor width is about 36 inches before considering the full mower deck discharge width. Weight changes by model.

The L100 and L110 are listed at about 462 pounds. The L118 is about 520 pounds, while the L120 and L130 are about 532 pounds.

L Series 42-Inch and 48-Inch Mower Decks

John Deere lists both 42-inch and 48-inch mower deck specifications in the L Series manual.

The 42-inch deck uses two rotary blades. Meanwhile, the 48-inch deck uses three rotary blades.

Published cutting height for both decks runs from about 1 to 4 inches.

John Deere LA100 Series Lawn Tractors

The LA100 family continued John Deere's residential lawn tractor design. Models across the family used different engines, mower decks, and equipment.

Compatible models listed for Sunshade 30212 include the LA100, LA110, LA120, LA130, LA140, and LA150. Other John Deere parts data also shows closely related LA models such as the LA105, LA115, LA125, LA135, LA145, LA155, LA165, and LA175.

Because model details vary, use the exact tractor serial number for service and parts work.

LA Series Mower Deck Choices

John Deere used different mower deck sizes across the LA family. Smaller models commonly used 42-inch decks, while larger models could use wider decks.

Deck size affects total tractor width. Therefore, always measure the actual machine before moving through a narrow gate or storage opening.

The sunshade adds height rather than deck width. Still, both dimensions matter when storing the tractor.

John Deere D100 Series Specifications

D100 Series Model Range

The D100 family included several residential lawn tractor models. Deere operator information covers machines such as the D100, D110, D120, D130, D140, D150, D160, and D170.

Engine size, charging system, deck width, dimensions, and tractor weight change across the series. Therefore, exact model identification remains important.

Original Tractor Cab lists Sunshade 30212 for the D100 Series, but the canopy does not change any Deere machine rating.

D100 Series 12-Volt Electrical System

John Deere lists a 12-volt battery system across the referenced D100 Series. Charging capacity changes with the model.

The D100, D110, D120, D130, and D140 use a 9-amp charging system in the Deere manual. By contrast, the D150, D160, and D170 use a 16-amp charging system.

Sunshade 30212 does not require electrical power for normal use.

D100 Series Fuel Capacity

John Deere lists a 2.4-gallon fuel tank in the referenced D100 Series specifications.

Deere recommends regular 87-octane unleaded gasoline. The manual also gives limits for approved ethanol and reformulated fuel blends.

Always follow the fuel guidance for the exact mower.

D100 and D110 Dimensions

John Deere lists the D100 and D110 at about 42.5 inches high. The published overall length for these models is about 68.75 inches.

The D100 weighs about 442 pounds. Deere lists the D110 at about 450 pounds in the same specification set.

Adding Sunshade 30212 increases total machine height. Therefore, measure the finished tractor after installation.

D120 and D130 Dimensions

The D120 and D130 stand about 44.5 inches high in Deere's published specifications. Their listed overall length is about 68.75 inches.

John Deere lists the D120 at about 450 pounds. The D130 weighs about 470 pounds.

Actual weight can increase when attachments, ballast, fuel, or other equipment is added.

D140, D160 and D170 Dimensions

John Deere lists the D140, D160, and D170 at about 45 inches high. The D140 measures about 68.75 inches long.

The D160 and D170 measure about 69.25 inches long in the referenced manual. Published D140 and D160 weight is about 525 pounds.

The D170 is heavier at about 579 pounds. Again, installed equipment can change the final machine weight.

D100 Series Mower Width

Total mower width changes with deck size. Deere lists the D100 through D130 at about 51.75 inches wide with the mower chute down.

The D140 and D160 are listed at about 60 inches wide. Meanwhile, the D170 reaches about 68.5 inches with the chute down.

These measurements show why model-specific data matters across the D100 family.

Common Features Across These John Deere Lawn Tractors

The L, LA100, and D100 families span different years. Still, they share a basic residential lawn tractor layout.

The operator sits above the rear section of the tractor. A front-mounted gasoline engine supplies power, while a mower deck works below the center of the machine.

Sunshade 30212 mounts above the operator area to provide shade without closing the tractor in.

Open Operator Station

These John Deere lawn tractors use an open operator station. This gives the driver easy access and a broad view around the mower.

However, the same open design leaves the operator exposed to direct sun. Therefore, a model-fit sunshade can be a useful warm-weather accessory.

The shade does not change the tractor's original safety systems.

Gasoline Engine Safety

The compatible L, LA100, and D100 tractors use gasoline engines. Exhaust from a gasoline engine contains carbon monoxide.

Never run the tractor in a closed garage, trailer, shed, or another confined space. Likewise, keep the engine and exhaust area clear of dry grass and debris.

Stop the engine before refueling or servicing the mower.

Use the Exact Model for Parts and Service

These mower families cover many years and configurations. Therefore, engine parts, belts, blades, filters, and other service items can differ.

Use the tractor model and serial number whenever you order parts. This is far more reliable than using only the broad L, LA100, or D100 family name.

For manufacturer parts information, visit the official John Deere parts website .

For factory operating information, use the official John Deere operator manual library .

The History of Original Tractor Cab Company

Original Tractor Cab began in 1939. The story started when Indiana farmer Stanley Williams needed better protection from the weather while working on his tractor.

So, Stanley built a cab for his own machine. Other farmers saw his idea and soon wanted similar weather protection.

A practical solution to a real farm problem became the start of Original Tractor Cab Co., Inc.

Stanley Williams Builds the First Cab

Farm work did not stop when the weather turned bad. Rain, snow, wind, and cold could make long tractor jobs hard.

Stanley Williams understood that problem because he faced it himself. Therefore, he designed a cab to give the tractor operator more cover.

His design drew interest from other farmers. In turn, demand for the product began to grow.

A Small Farm Ad Helps Build a Company

Stanley later placed an advertisement for his cab. The response showed that many equipment owners shared the same need.

More people wanted practical weather protection. As a result, the small idea developed into a manufacturing business.

That business became Original Tractor Cab Company.

American Manufacturing Since 1939

Original Tractor Cab grew from its Indiana roots. Through the years, the company continued to make products for people who work outdoors.

Equipment changed, so the company changed with it. Yet the basic goal remained simple.

Original Tractor Cab wanted to give operators useful protection from the weather.

Original Tractor Cab During World War II

World War II changed the company's early work. During the war years, normal cab production gave way to manufacturing for the war effort.

After the war, Original Tractor Cab returned to products for tractors and outdoor equipment. Therefore, the company's weather protection line continued to grow.

That period became part of a history that now stretches across more than eight decades.

Expansion Into Lawn and Garden Equipment

American yards and outdoor equipment changed after the war. Lawn tractors, garden tractors, snowblowers, and other small machines became more common.

Original Tractor Cab saw new needs in those markets. So, the company expanded beyond traditional farm tractor cabs.

Products for lawn and garden equipment became an important part of the business.

From Weather Cabs to Sunshades

Cold weather was not the only problem for equipment operators. Summer sun could also make hours of outdoor work less pleasant.

Therefore, Original Tractor Cab added sunshades and canopies to its product line. These products kept the operator area open while adding overhead shade.

Sunshade 30212 follows that simple idea today.

Three Generations of the Williams Family

The Williams family carried the company through three generations. During that time, outdoor machines changed in size, power, style, and purpose.

Original Tractor Cab continued to develop products for those changing machines. As a result, the company now serves tractor, mower, snow equipment, and utility vehicle owners.

The focus on practical operator protection remains part of the company today.

Sun Protection for Modern Lawn Tractor Owners

Stanley Williams began with protection from harsh weather. Many decades later, Sunshade 30212 addresses the other side of outdoor work: bright summer sun.

The product uses a simple vinyl canopy and steel frame. Yet that basic design can make a meaningful difference during a long mowing job.

Thus, an idea that began on an Indiana farm still serves outdoor equipment owners today.

Made in the USA Since 1939

Original Tractor Cab remains based in Arlington, Indiana. The company also continues to celebrate its American manufacturing history.

More than eight decades have passed since Stanley Williams built his first cab. Still, sun and weather remain part of outdoor work.

Sunshade 30212 carries that long history to compatible John Deere lawn tractor owners.

Read more on the Original Tractor Cab About Us page .

John Deere L, LA100 & D100 Series Sunshade 30212 FAQ

What John Deere lawn tractors fit Sunshade 30212?

Original Tractor Cab lists Sunshade 30212 for compatible John Deere L, LA100, and D100 Series lawn tractors. Dealer information also lists models including L100, L108, L111, L118, L120, L130, 102, 115, 125, 135, 145, 155C, 190C, LA100, LA110, LA120, LA130, LA140, and LA150.

Does Sunshade 30212 fit the John Deere D100 Series?

Yes. Both the Original Tractor Cab product title and dealer fit information identify the D100 Series as an application for Sunshade 30212.

Does Sunshade 30212 work with a bagger?

No. Dealer product information specifically states that Sunshade 30212 is not compatible with a bagger.

What is the Sunshade 30212 top made from?

The canopy uses lightweight 13-ounce ripstop vinyl. Dealer product data states that the material resists mold, mildew, and ripping.

What is the Sunshade 30212 frame made from?

Sunshade 30212 uses a 16-gauge steel frame to support the vinyl canopy over the operator area.

How large is Sunshade 30212?

Dealer product information lists the canopy at about 29 inches wide by 41 inches long.

Do I need to drill holes to install Sunshade 30212?

No. Dealer product information states that normal installation requires no holes to be drilled.

Can Sunshade 30212 be removed without tools?

Yes. After the initial installation, the sunshade can be removed without tools. This is useful for low branches, transport, or storage.

Can the vinyl cover be removed for cleaning?

Yes. The vinyl cover removes from the frame, which makes normal cleaning and storage easier.

Should the sunshade stay on during open trailer transport?

No. The Original Tractor Cab manual warns owners to remove the vinyl cover or the complete sunshade before transport on an open truck or trailer.

Does Sunshade 30212 provide sun protection?

Yes. The canopy helps reduce direct overhead sun. However, sunlight can still reach the operator through the open front and sides.

Does Sunshade 30212 protect from rain?

The overhead vinyl top may provide some cover from light rain. However, this product is an open sunshade and not a full rain enclosure.

Does Sunshade 30212 protect from snow, sleet, or wind?

No. The sunshade does not enclose the operator station. Therefore, it does not provide the weather coverage of a full winter cab.

Does Sunshade 30212 provide rollover protection?

No. Original Tractor Cab warns that this sunshade will not protect the operator from injury caused by rollover, collision, or other accidents.

Does the canopy protect against falling or flying objects?

No. Sunshade 30212 is not a Falling Object Protective Structure, impact guard, or debris shield.

Is Sunshade 30212 a genuine John Deere product?

No. Sunshade 30212 is an aftermarket product manufactured by Original Tractor Cab Co., Inc. for compatible John Deere lawn tractors.

Non-OEM and Liability Disclaimer

This is an aftermarket product produced by Original Tractor Cab Co., Inc. It is not a genuine John Deere OEM item. Deere & Company, John Deere, related logos, trademarks, and model names remain the property of their respective owners. Brand and model references on this page are used only to identify intended product fit.

Sunshade 30212 is intended for compatible John Deere L, 100, LA100, and D100 Series lawn tractors. Fit varies by model and installed equipment. Dealer product information specifically states that this sunshade is not compatible with a bagger. The owner must confirm exact compatibility before purchase and installation.

Sunshade 30212 is designed to provide shade and limited overhead weather cover only. It is not a full weather enclosure, sealed cab, rain cab, snow cab, or operator safety structure.

This product will only help protect from weather elements, not rollover or debris. Sunshade 30212 is not a Roll-Over Protective Structure, Falling Object Protective Structure, impact guard, collision-protection device, debris shield, or operator-restraint system.

Original Tractor Cab warns that the sunshade will not protect the operator from injuries caused by rollover, collision, or other accidents. It also will not protect against falling objects, flying debris, thrown mower objects, tree limbs, engine exhaust, chemicals, fire, or other hazards.

Always follow the John Deere operator manual and current Original Tractor Cab installation instructions. Keep all factory guards, shields, warning labels, controls, switches, interlocks, and other safety equipment in place and in proper working condition.

Never cut, drill, weld, bend, remove, or weaken a factory safety component to make Sunshade 30212 fit. Stop installation if any sunshade part interferes with a control, operator exit, safety device, warning label, engine component, mower deck, or required field of view.

The owner and operator must confirm correct product fit before installation and use. Replacement seats, body panels, controls, baggers, attachments, owner changes, and dealer-installed equipment may affect compatibility.

Adding Sunshade 30212 increases the tractor's total height. Measure the finished machine after installation and allow safe clearance below garage doors, sheds, trailers, tree limbs, and other overhead objects.

Remove the vinyl cover or complete sunshade before transporting the tractor on an open truck or trailer. Road-speed airflow can damage the canopy and its mounting parts.

Do not use the sunshade frame as a rollover bar, handhold, cargo rack, lifting point, tow point, attachment mount, or tie-down point.

California Proposition 65 Warning

WARNING: Cancer and Reproductive Harm — www.P65Warnings.ca.gov.

This product, lawn tractor components, gasoline engine exhaust, fuels, oils, batteries, plastics, vinyl materials, metals, and related equipment may expose users to chemicals known to the State of California to cause cancer, birth defects, or other reproductive harm. Follow all product and equipment safety instructions. Also, provide proper ventilation, wash hands after handling applicable materials, and avoid unnecessary exposure.