John Deere X300 Series Sunshade 30491 for 2016 and Newer Tractors
Stay cool as you mow with the Original Tractor Cab Sunshade 30491. This shade fits select 2016 and newer John Deere X300 Series lawn tractors. Its wide vinyl top helps block the hot sun from the seat. Thus, you can enjoy more comfort while you care for your lawn.
A strong steel frame holds the shade over the work area. Also, the bright yellow top pairs well with the look of a John Deere mower. The open sides let fresh air flow as you work. As a result, this lawn tractor canopy gives shade without closing in the seat.
Original Tractor Cab makes this sunshade in the USA. You can order it direct and get the right shade for your mower. For more fit choices, view our full line of John Deere tractor sunshades.
A Tough Sunshade Made for Lawn Work
Hot sun can make a long mow feel much worse. Heat can also cause stress and make it hard to stay at work. Therefore, a good mower shade can add comfort from the first pass to the last.
The 30491 sunshade uses a strong 16-gauge steel frame. This frame gives the top firm support on rough or smooth turf. Meanwhile, the top uses tough yellow vinyl made to resist rips, mildew, flame, and water.
Wet grass and light rain may leave drops on the top. Yet this product is an open sunshade, not a cab or full rain enclosure. Wind and rain can still reach the seat from each side.
Wide Shade with Open-Air Comfort
The canopy helps keep direct sun off the operator. Plus, its open form lets air move around the seat. That mix of shade and fresh air makes the unit a good fit for warm spring and summer work.
Clear sight is key when you mow near trees, beds, walls, or a drive. For that reason, the frame leaves the front and sides open. You can still look ahead, watch the deck path, and check the lawn near the mower.
Sun angles change through the day. So, the amount of shade will vary with the time, slope, and travel path. Wear sun-safe clothes and skin care when needed since an open canopy does not block all sun rays.
Simple Model-Specific Mounting
A model-fit frame makes the shade neat and firm. It also removes the need to guess at a loose, one-size mount. Before you start, read the full guide on our sunshade installation manuals page.
Use the right tools and keep all parts loose at first. Then, align the frame before you set each fastener. This method helps the top sit straight over the seat.
Check the frame and all bolts before each use. In addition, look for worn fabric, loose mounts, or damage after a low branch hit. Stop work and fix any fault before you mow again.
Sunshade 30491 Fit Guide
This John Deere X300 Series sunshade fits select tractors from model year 2016 and newer. The listed models are the X300, X330, X350, X350R with rear discharge, X354, X370, X380, X384, and X390.
However, the shade does not fit a tractor with a bagger. It also does not fit an all-wheel-steer model. As a result, confirm the steering type and each rear tool before you buy.
The X354 and X384 use all-wheel steer, so do not use this shade on those units despite their appearance in some older fit lists. Fit can also change when a mower has an added seat, rack, cab part, or other tool. Therefore, verify your full model number, year, steering type, and setup with Original Tractor Cab before purchase.
Not Compatible with Bagger Systems
A rear bagger uses space behind and above the mower. The sunshade frame may also need that area. Thus, Sunshade 30491 is not made for use with a bagger.
Do not alter the frame to force a fit. Cutting, drilling, or bending parts may weaken the shade and can create a risk. If your setup is not clear, please contact Original Tractor Cab for fit help.
Useful Benefits for Each Mowing Season
Bright sun can heat the seat and operator fast. Shade helps reduce direct heat from above, so yard work may feel less harsh. Plus, the yellow top gives the mower a clean, matched look.
The open canopy is also easy to step around. Unlike a full cab, it has no doors or side curtains. Therefore, you can get on and off the mower with no door to open.
A water-resistant top can shed light drops. Still, the sunshade should not serve as a storm shelter. Stop mowing when wind, hard rain, hail, or lightning makes the job unsafe.
Care for the Vinyl Top and Steel Frame
Wash the top with mild soap, cool water, and a soft cloth. Next, rinse it well and let it air dry. Strong cleaners may harm the finish, so test any care product in a small spot first.
Keep the shade away from low limbs and tight shed doors. Also, inspect the frame if the top hits a fixed item. Prompt care can help the vinyl and steel parts last.
Remove the shade or use the right cover before open-trailer travel. High road speed can place a large load on the top and frame. See our tractor cab and sunshade accessories for current care and transport options.
John Deere X300 Series Tractor Specifications
The 2016 and newer John Deere X300 Series includes several lawn tractor types. The line offers air-cooled gas engines, foot-controlled hydrostatic drive, and a range of mower decks. Yet power, steering, deck size, and drive parts vary by model.
Owners use these tractors for lawn care on home sites, large yards, and small grounds. Their low step, front engine, and mid-mount deck form a simple riding mower layout. In addition, many models can use lawn tools made for the right model and year.
X330 and X350 Specifications
The X330 uses a 22-horsepower, air-cooled V-twin gas engine in current listings. It can pair with a 42-inch or 48-inch Accel Deep mower deck. Also, a hydrostatic drive lets the operator change speed with foot pedals.
The X350 uses a V-twin gas engine and a hydrostatic transaxle. Deck choices have included 42-inch and 48-inch cuts, based on model year. The X350R uses a rear-discharge deck and an integrated rear collection design.
X370 Specifications
The X370 uses a 21.5-horsepower V-twin engine in current John Deere data. A 42-inch mower deck gives it a compact cut path. Plus, power steering and a hydraulic deck lift help cut effort at the wheel and lift control.
A K57 hydrostatic transaxle sends power to the rear wheels. Twin Touch pedals control forward and reverse travel. Cruise control can also help the operator hold a set pace on long runs.
X380 and X390 Specifications
The X380 uses a 23-horsepower V-twin gas engine. It has been sold with 48-inch and 54-inch Accel Deep mower decks. In addition, its K58 hydrostatic transaxle gives smooth foot control.
The X390 also uses a 23-horsepower V-twin engine and a K58 hydrostatic drive. Power steering and hydraulic deck lift help with use. A 48-inch mower deck gives it a broad cut for large lawns.
Specs can change by year and deck choice. Therefore, use your model and serial number when you order parts or check service data. Visit the official John Deere X300 Series page for current model details.
For safe use and care, read the guide made for your mower. John Deere hosts its official X300 Select Series operator manual online.
Why Buy Direct from Original Tractor Cab?
Direct sales make it easy to shop by brand, mower model, and product type. You can also find manuals, care parts, and fit help in one place. As a result, you spend less time trying to match a shade from a broad list.
Original Tractor Cab knows that small fit details matter. Steering type, model year, bagger use, and added parts can all change the right choice. So, review your mower before you order Sunshade 30491.
The History of Original Tractor Cab Company
Original Tractor Cab began in 1939. At that time, Indiana farmer Stanley Williams needed a way to stay warm and dry on his tractor. So, he built a cab for his own use.
Other farmers soon saw his idea and wanted cabs of their own. Williams then placed a small ad in a farm magazine. The strong response helped turn his farm-built cab into a new family firm.
World War II brought a change in work. During the war, the company stopped normal cab output and made backpacks and other goods for the armed forces. Later, it returned to tractor weather gear.
New products came as lawn and farm tools changed. The company added hardtop cabs, soft enclosures, sunshades, and cab parts for many types of equipment. Yet the main goal stayed the same: give operators useful cover from the weather.
Today, Original Tractor Cab works in Arlington, Indiana. The firm remains tied to its roots, its staff, and American-made products. Read more on the Original Tractor Cab history page.
John Deere X300 Sunshade Questions
Which mowers fit Sunshade 30491?
The shade fits select 2016 and newer X300 Series tractors. Listed two-wheel-steer models include the X300, X330, X350, X350R, X370, X380, and X390. Confirm the year, steering type, and full mower setup before purchase.
Can I use the sunshade with a bagger?
No. Sunshade 30491 is not compatible with a bagger. The bagger and shade may need the same rear mounting space.
Does the shade fit an all-wheel-steer mower?
No. The sunshade does not fit all-wheel-steer models. That exclusion applies to models such as the X354 and X384.
Is this product a full weather cab?
No. It is an open sunshade. The top helps block direct sun and may shed light drops, but it does not enclose the operator or protect from side rain, wind, snow, sleet, or hail.
Where is Sunshade 30491 made?
Original Tractor Cab makes the 30491 sunshade in the United States. It has a 16-gauge steel frame and a tough yellow vinyl top.
Product and Safety Disclaimers
Non-OEM and Liability Disclaimer
This aftermarket product is made by Original Tractor Cab Co., Inc. It is not a genuine John Deere OEM item. Deere & Company does not make, sponsor, approve, or endorse it. John Deere and all model names belong to their owner and identify product fit only. This sunshade helps reduce direct exposure to sun from above. It does not protect the operator from rollover, crash, lightning, hail, falling limbs, thrown objects, or flying debris. The shade is not a ROPS, FOPS, weather cab, or safety enclosure. Never use it as a handhold. Confirm fit and safe clearance before use. Also, read and follow all shade, mower, and tool instructions.
California Proposition 65 Warning
WARNING: This product can expose you to chemicals known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, visit www.P65Warnings.ca.gov.
