John Deere X500 Series Sunshade 30485 for 2016 and Newer Tractors
Stay cool as you mow with the Original Tractor Cab Sunshade 30485. This lawn tractor shade fits select 2016 and newer John Deere X500 Series tractors. Its wide top helps block direct sun from the seat. Thus, you can enjoy more comfort while you care for a large lawn.
A strong steel frame holds the canopy above the operator. Plus, a black rear screen helps keep sun off your back. The open sides let fresh air flow through the work area. As a result, you get useful shade without the closed feel of a full cab.
Original Tractor Cab makes this sunshade in Arlington, Indiana. The yellow top also pairs well with the look of a John Deere lawn tractor. For more options, view our full line of John Deere tractor sunshades.
Sun Protection for Long Mowing Jobs
Direct sun can make a long day on a mower feel hard. Heat may also cause stress and cut your urge to finish the job. Therefore, good shade can add real comfort from the first pass to the last.
Sunshade 30485 helps block the bright sun from above. Meanwhile, its rear screen adds shade behind the seat. This simple design can make warm spring and summer work feel less harsh.
The canopy keeps each side open. So, air can move near the seat as the tractor goes across the yard. Open space also makes it easy to get on and off the mower.
Strong 16-Gauge Steel Frame
A 16-gauge steel frame gives the shade firm support. The model-fit mount also helps keep the canopy in the right place above the seat. Thus, the unit looks neat and stays useful on rough or smooth turf.
Check all mounts before each use. In addition, look for loose bolts or frame damage after contact with a limb. Stop work and fix any fault before you mow again.
Never hold the shade frame as you get on or off the tractor. The frame is not a handrail or safety bar. Instead, use the mower steps and grips as shown in the tractor guide.
Tough Yellow Vinyl Canopy
The yellow canopy uses rip-stop vinyl made to resist mildew, flame, and water. As a result, the top can stand up to common lawn care use. A black screen at the rear adds more shade near the operator’s back.
Light drops may roll off the water-resistant top. However, this product is an open sunshade rather than a rain cab. Wind, rain, snow, sleet, or hail can still reach the operator from each side.
Changing sun angles will also shift the shaded area. Therefore, wear sun-safe clothes and use skin care when needed. An open mower canopy does not block all sun rays.
Sunshade 30485 Fit Guide
This John Deere X500 Series sunshade fits the X570, X580, and X590 from model year 2016 and newer. It does not fit the X584 with four-wheel steer. Also, it is not compatible with a grass bagger.
Confirm the full model number and year before you place an order. Added seats, baggers, racks, lights, and other tools may affect fit. If your setup is not clear, please contact Original Tractor Cab.
Fits the John Deere X570
Sunshade 30485 fits the 2016 and newer John Deere X570. The mount gives the operator shade while keeping the front and sides open. Plus, the rear screen helps reduce direct sun from behind.
Fits the John Deere X580
The same shade fits the 2016 and newer John Deere X580. Its open-air form works well for warm lawn care. Meanwhile, the yellow vinyl top gives the mower a clean, matched style.
Fits the John Deere X590
Owners of a 2016 and newer John Deere X590 can also use Sunshade 30485. The canopy gives broad shade above the seat. Yet it keeps a clear view of the lawn and work path.
Does Not Fit the X584 or a Grass Bagger
The X584 uses four-wheel steer, so its setup differs from the listed two-wheel-steer models. Therefore, Sunshade 30485 does not fit the X584. Do not alter the mount or frame to force a fit.
A grass bagger also needs space at the rear of the tractor. That area may conflict with the sunshade mount and rear screen. As a result, do not use this shade with a bagger.
Easy Sunshade Installation
Clear, model-fit parts help make setup simple. First, read the guide and sort the hardware. Then, place the frame parts on the tractor as shown.
Keep all fasteners a bit loose while you align the frame. Next, set the top so it sits straight over the seat. Tighten each part only after the full frame lines up.
Installation time can vary with tools and skill. For help before you begin, visit our sunshade installation manuals.
Care and Storage
Clean the vinyl top with mild soap, cool water, and a soft cloth. After that, rinse it well and let it air dry. Strong cleaners may harm the color or finish.
Keep the canopy clear of low limbs and tight doors. Also, check shed and trailer height before you drive inside. A hard strike can harm the top, frame, tractor, or nearby site.
Do not tow the mower on an open trailer with the sunshade in place unless the instructions allow it. Road speed can put a high load on the fabric and frame. Browse our tractor cab and sunshade accessories for current care options.
John Deere X500 Series Specifications
The John Deere X500 Series includes strong lawn tractors for large yards and tough mowing jobs. Models in this fit group use gas engines, hydrostatic drive, and mid-mount mower decks. Yet engine power and control features vary by model.
The X570, X580, and X590 use two-wheel steering. By contrast, the X584 uses four-wheel steering and does not fit this shade. Owners should use the model and serial number when they check parts or service facts.
John Deere X570 Specifications
The John Deere X570 uses a 24-horsepower, air-cooled V-twin gas engine. Its engine has 44.3 cubic inches of size. Full-pressure oil flow and a replaceable oil filter help support long service life.
A K72 hydrostatic transaxle sends power to the rear wheels. Twin Touch foot pedals control forward and reverse travel. In addition, a foot lift helps raise the mower deck.
The X570 has been offered with a 48-inch or 54-inch Accel Deep mower deck. Its fuel tank holds about 4.4 U.S. gallons. The tractor can also use select lawn and snow tools made for its model year.
John Deere X580 Specifications
The X580 also uses a 24-horsepower V-twin engine with 44.3 cubic inches of size. A K72 hydrostatic transaxle gives smooth speed control. Plus, Twin Touch pedals make quick travel changes easy.
Power steering helps reduce effort during tight turns. A hydraulic deck lift also makes height changes easy. Buyers can pair the X580 with a 48-inch or 54-inch mower deck.
John Deere X590 Specifications
The John Deere X590 uses a 25.5-horsepower V-twin gas engine. Electronic fuel injection helps supply fuel as the engine needs it. Thus, the tractor can give smooth starts and steady power.
A K72 hydrostatic transaxle controls travel. Power steering and a hydraulic deck lift also help with daily use. Deck choices include 48-inch and 54-inch Accel Deep mower decks.
X500 Series Drive and Mower Features
Hydrostatic drive lets the operator change speed without a manual gear shift. Also, separate foot pedals control forward and reverse travel. This setup helps when you mow near trees, beds, and other yard sites.
Accel Deep decks use a deep shell to move cut grass. Deck size will affect the cut path and space needed for storage. Therefore, check the full tractor label before you buy blades, belts, or other deck parts.
Product details can change by year and mower setup. Visit the official John Deere X500 Series page for current equipment data. You can also use the official John Deere X570, X580, X584, and X590 operator manual for use and care guidance.
Why Buy Direct from Original Tractor Cab?
Direct sales give you one source for fit help, product guides, parts, and shade options. You can shop by mower model instead of trying to adapt a loose cover. As a result, it is easier to choose the right product.
Small fit details still matter. Model year, steering type, bagger use, and added gear can change the right shade. So, inspect the tractor before you buy.
The History of Original Tractor Cab Company
Original Tractor Cab began in 1939. At that time, Indiana farmer Stanley Williams needed shelter from bad weather as he worked. So, he built a cab for his own tractor.
Other farmers soon saw the value of his idea. Williams then placed a small ad in a farm magazine. The strong response helped turn one farm-built cab into a family firm.
World War II brought a new task. During the war, normal cab work stopped as the company made backpacks and other needed goods for the armed forces. Later, tractor cab output began once more.
The product line grew as farm and lawn tools changed. Hardtop cabs, soft enclosures, sunshades, and useful cab parts joined the range. Yet the main goal stayed much the same: help operators work with more cover from the weather.
Today, Original Tractor Cab works in Arlington, Indiana. The company still values family, useful design, and American-made products. Read more on the Original Tractor Cab history page.
John Deere X500 Sunshade Questions
Which John Deere tractors fit Sunshade 30485?
Sunshade 30485 fits the 2016 and newer John Deere X570, X580, and X590. Confirm the year and full mower setup before purchase.
Does this sunshade fit the John Deere X584?
No. Sunshade 30485 does not fit the X584 because that model uses four-wheel steering. Do not alter the frame to force a fit.
Can I use the shade with a grass bagger?
No. The 30485 sunshade is not compatible with a grass bagger. Both products may need the same space behind the tractor seat.
Is Sunshade 30485 a full weather enclosure?
No. This product is an open lawn tractor canopy. It helps block direct sun from above, but it does not enclose the operator or provide full protection from rain, snow, wind, sleet, or hail.
What is the canopy made from?
The shade has a 16-gauge steel frame and a tough yellow vinyl top. The fabric resists rips, mildew, flame, and water. A black rear screen also helps shade the operator’s back.
Where is the John Deere X500 sunshade made?
Original Tractor Cab makes Sunshade 30485 in Arlington, Indiana, USA.
Product and Safety Disclaimers
Non-OEM and Liability Disclaimer
This is an aftermarket product made by Original Tractor Cab Co., Inc. It is not a genuine John Deere OEM item. Deere & Company does not make, sponsor, approve, or endorse it. John Deere and all model names belong to their owner and identify product fit only. This sunshade helps reduce direct exposure to sun from above. It does not protect the operator from rollover, crash, lightning, hail, falling limbs, thrown objects, or flying debris. The shade is not a ROPS, FOPS, weather cab, or safety enclosure. Never use the frame as a handhold. Confirm model, year, fit, clearance, and safe control use before installation. Read and follow all shade, mower, attachment, and accessory instructions.
California Proposition 65 Warning
WARNING: This product can expose you to chemicals known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, visit www.P65Warnings.ca.gov.
