John Deere X700 Signature Series Sunshade 30536
Stay cool while you mow with Original Tractor Cab Sunshade 30536. This sun canopy fits eight John Deere X700 Signature Series lawn tractors. Its wide top helps keep direct sun off your head and back. Thus, warm yard work can feel much better.
The shade mounts to the tractor with a bolt-on system. No drilling is needed for the listed models. Plus, its open sides let fresh air move near the seat as you work.
Original Tractor Cab makes Sunshade 30536 in the USA. Its model-fit design gives your tractor a clean look and useful shade. For more fit choices, view our full line of John Deere lawn tractor sunshades.
Cool Shade for Long Mowing Jobs
Direct sun can make a long mow feel hard. Heat may also add stress and slow your pace. Therefore, a sunshade can add real comfort during warm spring and summer work.
The UV-resistant canopy helps block direct sun from above. Meanwhile, the open sides let air flow through the work area. As a result, you gain shade without the closed feel of a full cab.
Sun angles change through the day. So, the amount of shade will vary with the time, slope, and travel path. Wear sun-safe clothes and use skin care when needed since an open canopy cannot block every ray.
UV-Resistant Sun Canopy
A durable canopy forms the main shade above the seat. The material resists harm from UV light during normal use. Thus, it is well suited to long days of lawn and grounds care.
The top may also help shed light drops from above. However, Sunshade 30536 is not a full rain cab or weather enclosure. Wind and rain can still reach the operator through each open side.
Stop work when high wind, hail, hard rain, or lightning makes mowing unsafe. Never use the canopy as a storm shelter. Instead, move to a safe place until the storm has passed.
Open-Air Comfort and Clear Sight
Open sides let you see trees, beds, walls, and other lawn sites. They also make it easy to check the deck path. Therefore, you can mow with shade while keeping a wide view.
Fresh air can move near the seat as the tractor goes across the lawn. Plus, the canopy has no side door to open. This simple form makes entry and exit fast.
Never use the frame as a handhold. The shade is not a safety bar or grab rail. Use the tractor steps and grips as shown in the John Deere operator guide.
Easy Bolt-On Sunshade Installation
Sunshade 30536 uses a no-drill bolt-on mount for the listed X700 tractors. First, read the full guide and sort the hardware. Then, place each frame part on the tractor as shown.
Keep the fasteners a bit loose during the first fit. Next, align the full frame and canopy above the seat. Tighten each bolt only after all parts sit in the right place.
Installation time can vary with tools and skill. Added lights, seats, racks, or other parts may also affect the work. For more help, see our sunshade installation manuals.
Check the Sunshade Before Each Use
Look at the frame and mounts before you start the engine. Also, check the canopy for wear, loose parts, or damage. Fix any fault before you mow.
Low limbs can catch the top or frame. Shed doors and trailers may also have low space. Therefore, check the full tractor height before you drive under a fixed item.
A hard strike may harm both the shade and tractor. Stop at once if the canopy hits a limb, wall, or roof. Then, inspect every mount before you use the mower again.
Sunshade Cleaning and Storage
Use mild soap, cool water, and a soft cloth to clean the canopy. After that, rinse it well and let it air dry. Strong cleaners may harm the color or finish.
Store the tractor in a dry place when you can. In addition, keep sharp tools and rough walls away from the canopy. Good care can help the shade stay clean and useful.
Road speed can place a large load on the top and frame. So, do not haul the tractor on an open trailer with the shade in place unless the product guide allows it. Browse our tractor cab and sunshade accessories for current care options.
John Deere X700 Sunshade Fit Guide
Sunshade 30536 fits the John Deere X710, X730, X734, X738, X739, X750, X754, and X758 Signature Series tractors. Still, model names alone do not prove fit on a tractor with custom parts. Confirm the full model, year, serial number, and setup before purchase.
This shade is not compatible with a grass bagger. The bagger and shade may need the same space behind the seat. Therefore, do not alter either product to force a fit.
Fits X710, X730, X734, X738 and X739 Gas Tractors
The 30536 canopy fits the X710 and the gas-powered X730 family. That group also includes the X734, X738, and X739. Yet steering and drive layouts differ among these models.
The X710 and X730 use power two-wheel steering. By contrast, the X734 uses power four-wheel steering. The X738 adds full-time four-wheel drive, while the X739 pairs four-wheel drive with four-wheel steering.
Fits X750, X754 and X758 Diesel Tractors
Sunshade 30536 also fits the diesel-powered X750 family. The X750 uses two-wheel drive and two-wheel steering. Meanwhile, the X754 adds four-wheel steering.
The X758 uses full-time four-wheel drive with two-wheel steering. All three models use a three-cylinder diesel engine. Thus, owners can choose a drive and steering layout that suits their land.
Not Compatible with a Grass Bagger
A grass bagger needs space at the back of the tractor. The sunshade frame also uses the rear seat area for its mount. As a result, Sunshade 30536 cannot be used with a bagger.
Do not drill new holes or bend the frame to clear a bagger. Such a change may weaken the shade and create a risk. If your setup is not clear, please contact Original Tractor Cab.
John Deere X700 Signature Series Specifications
The John Deere X700 Signature Series includes large garden tractors for mowing, snow work, and yard care. The line offers gas or diesel power, hydrostatic drive, and several steering layouts. However, the exact engine and drive system vary by model.
Available mower decks include 48-inch, 54-inch, and 60-inch cuts on select models. Hydraulic tool lift also helps raise a deck or front tool. Plus, power steering reduces effort during long jobs.
John Deere X710 Specifications
The X710 serves as the entry model in this Signature Series group. It uses a liquid-cooled gas engine and hydrostatic drive. Power two-wheel steering helps with turns, while hydraulic lift controls the deck or front tool.
Twin Touch pedals manage forward and reverse travel. A differential lock can also add drive when the ground turns slick. Deck and attachment fit will vary with the tractor year.
X730, X734, X738 and X739 Gas Engine Specifications
The X730, X734, X738, and X739 use a 25.5-horsepower gas engine. This liquid-cooled V-twin engine has electronic fuel injection. Its size is 45.5 cubic inches, or 745 cc.
A K90 hydrostatic transaxle gives smooth travel control. Twin Touch pedals control forward and reverse speed. In addition, cruise control can help hold a steady pace on long paths.
The X730 uses two-wheel drive and two-wheel steering. However, the X734 adds four-wheel steering for tight turns. Its rear wheels turn with the front wheels to reduce the uncut circle.
The X738 uses full-time four-wheel drive and two-wheel steering. By contrast, the X739 combines full-time four-wheel drive with four-wheel steering. This layout adds grip and tight turn control.
X750, X754 and X758 Diesel Engine Specifications
The X750, X754, and X758 use a 24-horsepower diesel engine. This liquid-cooled engine has three cylinders and 60.6 cubic inches, or 993 cc, of size. Its diesel design gives strong low-speed power for hard work.
A K90 hydrostatic transaxle sends power to the drive wheels. Twin Touch pedals control travel speed and direction. Meanwhile, a differential lock helps on loose or wet ground.
The X750 uses two-wheel drive and power two-wheel steering. The X754 also has two-wheel drive, but it adds power four-wheel steering. In contrast, the X758 uses full-time four-wheel drive and power two-wheel steering.
Mower Deck and Tool Options
Select X700 models can use 48-inch, 54-inch, or 60-inch mower decks. A wide deck can cut a large lawn in fewer passes. Yet a small deck may fit tight sites with more ease.
The tractors can also work with select front blades, snow blowers, brooms, and rear tools. Exact fit depends on the model, year, hitch, PTO, and mount kit. Therefore, check each tool before purchase.
Hydraulic implement lift makes it easy to raise a deck or front tool. Four hydraulic outlets also support select equipment. In addition, some models can use an optional rear PTO and three-point hitch.
Operator Comfort and Controls
A 21-inch adjustable seat gives support during long jobs. Fender grips can also help with safe entry and exit. Plus, the tilt steering wheel lets the operator set a good driving pose.
An hour meter and fuel gauge help track use. A 12-volt outlet can power a small approved item. Diesel models also use a larger engine-mounted alternator than the gas group.
Specs may change by year and setup. Visit the official John Deere X700 Signature Series page for model details. You can also read the official John Deere X710 through X739 operator manual for safe use and care.
Why Buy Direct from Original Tractor Cab?
Direct sales give you one source for fit help, product guides, and shade parts. You can shop by the exact tractor model instead of trying to adapt a loose canopy. As a result, choosing the right product becomes much easier.
Small fit facts still matter. Model year, bagger use, seat type, and added tools can change the right shade. So, inspect the tractor before you order Sunshade 30536.
The History of Original Tractor Cab Company
Original Tractor Cab began in 1939. At that time, Indiana farmer Stanley Williams needed shelter from bad weather while he worked. So, he built a cab for his own tractor.
Other farmers soon saw the value of his idea. Williams then placed a small ad in a farm magazine. The strong reply helped turn one farm-built cab into a family business.
World War II brought a new task. During the war, normal cab work stopped as the company made backpacks and other needed goods for the armed forces. Later, the firm began to make tractor cabs again.
New products came as lawn and farm tools changed. Hardtop cabs, soft enclosures, sunshades, and cab parts joined the line. Yet the main goal stayed much the same: help people work with more cover from the weather.
Today, Original Tractor Cab works in Arlington, Indiana. The company still values useful design, family roots, and American-made products. Read more on the Original Tractor Cab history page.
John Deere X700 Sunshade Questions
Which tractors fit Sunshade 30536?
Sunshade 30536 fits the John Deere X710, X730, X734, X738, X739, X750, X754, and X758 Signature Series tractors. Confirm the model, year, and full setup before purchase.
Can I use this shade with a grass bagger?
No. Sunshade 30536 is not compatible with a grass bagger. Do not alter the frame or bagger to force a fit.
Does installation require drilling?
No. The shade uses a bolt-on mount for the listed tractors. Follow the supplied guide and use the correct hardware.
Is the canopy UV resistant?
Yes. The durable canopy material resists UV light during normal outdoor use. Still, an open shade does not block all sun from every angle.
Is Sunshade 30536 a full weather enclosure?
No. It is an open sun canopy. The shade does not enclose the operator or provide full protection from rain, snow, sleet, hail, or wind.
Where is Sunshade 30536 made?
Original Tractor Cab makes Sunshade 30536 in the United States.
Product and Safety Disclaimers
Non-OEM and Liability Disclaimer
This is an aftermarket product made by Original Tractor Cab Co., Inc. It is not a genuine John Deere OEM item. Deere & Company does not make, sponsor, approve, or endorse it. John Deere, X700 Signature Series, and all model names belong to their owner and identify product fit only. This sunshade helps reduce direct exposure to sun from above. It does not protect the operator from rollover, crash, lightning, hail, falling limbs, thrown objects, or flying debris. The shade is not a ROPS, FOPS, weather cab, or safety enclosure. Never use the frame as a handhold. Confirm the tractor model, year, serial number, fit, clearance, and safe control use before installation. Read and follow all shade, tractor, mower deck, and attachment instructions.
California Proposition 65 Warning
WARNING: This product can expose you to chemicals known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, visit www.P65Warnings.ca.gov.
