John Deere X300 Series Cab for Rain, Snow and Wind

Cold weather can make yard work hard.

Rain can soak your coat. Snow can blow back in your face. Also, cold wind can make a short job feel much longer.

Cab 12070 helps shield the seat area from those harsh days.

Hardtop Weather Cover for Your Lawn Tractor

The cab has a hard roof and clear side panels.

So, it gives more cover than an open sunshade. Yet it still lets you see the work area through the clear windows.

This makes it useful for lawn care and snow work.

Fits Select John Deere X300 Series Lawn Tractors

Original Tractor Cab lists the X330, X350, X370, X380, and X390 as current fit models for Cab 12070.

The installation guide also names some older X300 Series tractors. Yet the current product listing has a shorter fit list.

So, check your model and serial number before you buy.

Does Not Fit All-Wheel-Steer Models

Cab 12070 does not fit John Deere all-wheel-steer lawn tractors.

The current product page also rules out the X350R, X340, X324, X354, X384, and X394. So, do not order for those models without direct fit approval.

The X340 appears in an older cab manual, so its fit needs a final check.

Check Your Tractor Before You Order

John Deere made many X300 Series models.

Some look much the same but use different frames, seats, controls, or rear parts. So, the model name alone may not prove fit.

Check the year, serial number, and any added tools.

Why Fit Matters

A cab must leave room for the driver and all controls.

It must also clear the seat, pedals, wheel, and rear parts. So, a model-fit design is key to safe use.

Ask Original Tractor Cab if you have a fit question.

Tough ABS Plastic Hardtop

Cab 12070 uses a hard ABS plastic roof.

The roof helps block rain, snow, and sleet from above. Also, it gives the cab a firm top that holds its shape during normal use.

Keep low tree limbs clear of the roof.

Clear Polycarbonate Windows

The cab uses clear, shatter-resistant polycarbonate for its windows.

These panels help you see the yard, path, and work area. Yet they are not safety glass and can scratch if you clean them the wrong way.

Use the care steps in the cab manual.

Hinged Doors on Both Sides

Cab 12070 has a hinged door on each side.

So, you can enter or leave the cab from either side when the area is clear. Door latches help keep the panels in place during normal use.

Check each latch before you start.

Clear Rear Curtain

A clear rear curtain helps close the space behind the seat.

That helps reduce wind and blowing snow from the rear. Also, it lets you look back when you need to check the work area.

Keep the rear panel clean for a clear view.

Front Windshield Helps Block Snow and Rain

The front windshield helps shield the driver from wet weather.

Its forward slope can help reduce glare and direct contact with falling rain or snow. So, you can see more of the path ahead during normal use.

Keep the window clear at all times.

Optional Safety Glass Windshield

Original Tractor Cab offers an optional safety glass windshield for Cab 12070.

The standard cab uses clear polycarbonate. So, the glass option gives owners another choice for the front window.

Check the current accessory fit before you buy.

Optional Electric Wiper Kit

Rain and wet snow can build up on a windshield.

An optional electric wiper kit can help clear the view when paired with the correct windshield. So, this can be a useful add-on for winter work.

Follow the kit guide for safe setup.

Optional Mirror Kits

A mirror can help you check the area around the tractor.

Original Tractor Cab lists mirror kits as an option for Cab 12070. Yet a mirror does not replace a full look before you back up or turn.

Check all sides before you move.

Optional Light Kits

Short winter days can mean less light for yard work.

Original Tractor Cab also lists light kits as an option. So, you can ask about the right light kit for your cab and tractor.

Use safe wiring and proper mounts.

73-Inch Cab Height

Original Tractor Cab lists a cab height of 73 inches.

That gives you a useful size to check before you enter a shed or garage. Yet tire size, ground, and tractor setup may affect real clearance.

Measure your full tractor after installation.

About 70 Pounds of Cab Weight

Cab 12070 weighs about 70 pounds.

That makes it lighter than many factory steel cabs. Yet it still adds weight and height to the tractor.

Follow the John Deere load and use limits.

No Drilling Needed for Normal Installation

Original Tractor Cab designed Cab 12070 to use existing tractor mount points.

So, normal installation does not call for new holes in the tractor. This helps keep the job simple and avoids extra frame work.

Use only the right mounts and bolts.

About Three to Four Hours to Install

Original Tractor Cab lists an install time of about three to four hours.

The actual time may change with tools, skill, and tractor setup. So, read the full guide before you start.

Work on flat ground and remove the key.

Follow the Cab Assembly Guide

The manual shows the frame, roof, doors, and clear panels.

It also gives the order for the mounts and bolts. So, use the guide from start to end.

Do not skip the final safety check.

Cab 12070 for Snow Removal

Snow work can put the driver in cold wind for hours.

A cab helps block some of that wind and blowing snow. So, Cab 12070 can make winter yard work more pleasant.

Check snow tool fit before you start.

Use With Compatible Snow Tools

Some X300 Series tractors can use snow blades or snow throwers.

Yet tool fit can vary by model and year. So, check that the cab clears the lift parts, chute controls, and all moving parts.

Stop if any part makes contact.

Cab 12070 for Cold Rain

Rain can make fall yard work hard.

The hard roof and clear panels help keep much of the rain and wind away from the seat. Yet this is not a sealed or waterproof cab.

Some water may enter through gaps.

Cab 12070 for Sleet and Wet Snow

Sleet and wet snow can make outdoor work less pleasant.

The cab helps block direct contact with much of that weather. So, you may feel more at ease while you clear a path or do yard work.

Keep the windshield clear for a safe view.

Cab 12070 for Cold Wind

Wind can make cold days feel much worse.

The doors, front panel, and rear curtain help reduce direct wind around the seat. Yet small gaps may still let cold air enter.

Wear the right clothes for the weather.

Shade From the Hard Roof

The ABS roof can also block direct sun from above.

Yet a full cab may hold more heat on warm days. So, use care in hot weather and keep enough fresh air in the cab.

Stop work if heat becomes a risk.

Cab 12070 Is Not Heated

The standard cab does not include a heater.

It helps shield the operator from wind and wet weather. Yet it does not make heat on its own.

Dress for the cold when you work.

Do Not Use Unsafe Heaters

A small cab is not a safe place for an open flame.

So, do not use fuel heaters or other devices that can add fumes or fire risk. Engine exhaust can also enter a cab.

Use the tractor only with safe airflow.

Keep Fresh Air in the Cab

A cab can reduce direct wind.

Yet fresh air is still vital. So, never run the tractor in a closed garage, shed, or other space with poor airflow.

Carbon monoxide can cause death.

Check for Exhaust Fumes

Engine fumes can enter through cab gaps.

So, stop the engine at once if you smell exhaust or feel sick. Move to fresh air and fix the cause before you use the tractor again.

Never ignore a fume problem.

Keep All Tractor Controls Free

The cab must not block the wheel or pedals.

Check the brake, deck lift, seat, and all other controls after installation. Then, move each control through its full range.

Stop if the cab makes contact.

Check Door Latches

Cab doors need to close and latch as the guide directs.

So, check both sides before you start the engine. Also, look for worn hinges or loose parts from time to time.

Keep each door in good shape.

Clean Clear Windows the Right Way

Polycarbonate windows can scratch.

So, do not wipe dry dirt from the clear panels. First, rinse the dirt away with clean water.

Then, use the cleaning steps in the manual.

Do Not Use a Dry Rag on Clear Panels

Dry dust can act like grit on clear plastic.

So, a dry rag may leave fine marks. The cab manual calls for clean running water and gentle hand cleaning.

Use mild liquid soap when needed.

Clean the Vinyl Panels With Mild Soap

The colored vinyl can collect grass dust and road dirt.

So, wash those parts with mild soap and water. Then, rinse well and let them dry.

Keep harsh cleaners away from the panels.

Store the Cab Panels With Care

Clear panels need safe storage.

So, clean and dry them before you put them away. Also, avoid tight folds that can mark the clear plastic.

Use a clean, dry storage space.

Remove Vinyl Panels for Open Trailer Transport

Road wind can place high force on cab panels.

The Original Tractor Cab manual directs owners to remove the vinyl panels before open truck or trailer transport. So, follow that step before you haul the tractor.

Keep all loose parts safe on the trip.

Check Low Tree Limbs and Doors

Cab 12070 adds height to the tractor.

So, look up before you pass under trees or low doors. A limb can strike the roof even when the tractor hood has room.

Measure the full height before use.

Check Bolts and Frame Parts

Tractor use can cause vibration.

So, check the frame bolts from time to time. Also, look for bent parts, loose mounts, or wear near the doors.

Fix any fault before you work.

Care for Door Hinges and Latches

The cab manual calls for light machine oil on the hinges and latches.

That can help the doors move as they should. So, check the parts often and use oil as the guide directs.

Wipe away excess oil.

One-Year Limited Warranty

Original Tractor Cab lists a one-year limited warranty for its tractor cabs.

The warranty has terms and limits. So, keep your proof of purchase and read the current policy before you make a claim.

Contact the company if you need help.

Buy John Deere X300 Cab 12070 Direct

Original Tractor Cab makes Cab 12070.

So, buying direct gives you a way to ask the maker about fit, setup, and cab parts. This can help when your tractor has extra tools or a less common setup.

The right cab starts with the right model.

See our John Deere cab and enclosure collection for more model-fit choices.

You can also shop our John Deere hardtop cabs for other cab models.

Read our installation manuals before you start.

Need help with fit? Use our contact page to reach our team.

John Deere X300 Series Lawn Tractor Specifications

John Deere built the X300 Series for home lawn care.

These tractors use gas engines and hydrostatic drive. So, they can mow, haul, and do yard work with the right tools.

Exact specs can change by model and year.

John Deere X330 Engine

The X330 uses a gas engine.

John Deere lists a 22-horsepower V-twin engine for the X330. So, the tractor has power for lawn mowing and other light yard jobs.

Use the engine tag for exact parts.

John Deere X330 Mower Deck

The X330 has used a 42-inch mower deck.

This deck size can suit many home lawns. Also, the tractor uses hydrostatic drive for easy speed changes.

Check the deck tag before you buy blades.

John Deere X350 Engine

The X350 uses a gas engine.

John Deere lists a 21.5-horsepower V-twin engine for many X350 models. So, it can handle lawn mowing and yard work with the right tools.

Check the model year for exact data.

John Deere X350 Mower Deck Sizes

The X350 has been sold with 42-inch and 48-inch mower decks.

A wide deck can mow more grass in one pass. Yet a small deck may work better near trees and lawn beds.

Use the right deck parts for your tractor.

John Deere X370 Engine

The X370 uses a gas engine.

John Deere lists a 21.5-horsepower V-twin engine for the X370. So, it can handle mowing and other lawn work.

Keep the engine cooling area clean.

John Deere X370 Power Steering

The X370 uses power steering.

That can reduce effort at the wheel during long mowing jobs. Also, it can help when you turn near trees or yard beds.

Follow the Deere service guide.

John Deere X380 Engine

The X380 uses a gas engine.

John Deere lists a 23-horsepower V-twin engine for many X380 models. So, the tractor can handle larger mowing jobs with the right deck.

Use the engine tag for exact service data.

John Deere X380 Mower Deck Sizes

The X380 has been sold with 48-inch and 54-inch mower decks.

A 54-inch deck can cut more grass in one pass. Yet it also needs more room near trees and tight paths.

Choose the deck that suits your lawn.

John Deere X390 Engine

The X390 uses a gas engine.

John Deere lists a 23-horsepower V-twin engine for many X390 models. So, it can handle lawn work with the right tools.

Check the year for exact engine data.

John Deere X390 Power Steering

The X390 uses power steering.

This helps reduce effort at the wheel. So, the tractor can be easier to guide during long work days.

Keep the steering system in good shape.

John Deere X390 Mower Deck Options

The X390 has been sold with 48-inch and 54-inch mower decks.

Both sizes can suit large lawns. Yet the best choice depends on gates, trees, slopes, and other yard features.

Check your exact deck before you buy parts.

Hydrostatic Drive Across the X300 Series

The X330, X350, X370, X380, and X390 use hydrostatic drive.

That lets the operator change speed without a manual gear shift. So, these tractors can work well on lawns with many turns.

Use a safe speed for the ground.

Foot-Controlled Travel

Hydrostatic drive uses foot controls for travel.

So, the operator can slow down near a tree or path without shifting gears. This can help during lawn work with many short moves.

Keep the foot area clear of cab parts.

John Deere X300 Series Mower Decks

Deck size can change by tractor model.

The X300 Series includes 42-inch, 48-inch, and 54-inch deck options on select models. So, check your exact deck before you order blades, belts, or other parts.

Use the right deck for your yard.

John Deere X300 Series Snow Tools

Some X300 Series tractors can use snow blades or snow throwers.

Yet tool fit can change by model and year. So, check both the Deere tool guide and Cab 12070 clearance before you start.

Keep all moving parts clear of the cab.

John Deere X300 Series Yard Work

These tractors can do more than mow.

Owners may use carts, spreaders, and other tools that fit their model. So, one tractor can help with many jobs around the yard.

Check the tool load and fit limits.

John Deere X300 Series Maintenance

Good care can help a tractor stay in use.

Check engine oil, filters, belts, blades, tires, and drive parts as Deere directs. Also, clean grass from the deck and engine area.

Use the right parts for your model.

Check Your John Deere Model and Serial Number

John Deere made changes during the X300 Series years.

So, use the full model and serial number when you buy service parts. The same rule helps when you shop for Cab 12070.

Do not rely on the model name alone.

Official John Deere X300 Series Information

John Deere offers parts and service data for X300 Series tractors.

Use the John Deere parts store to find parts by model.

You can also visit the John Deere website for model support and owner information.

The History of Original Tractor Cab Company

Original Tractor Cab began in 1939.

The story starts with Stanley Williams, a farmer in Indiana. He needed a way to stay out of harsh weather while he worked on his tractor.

So, he made a cab for his own use.

A Simple Idea From the Farm

Farm work had to go on in rain, wind, snow, and cold.

Stanley saw that a cab could help the person at the wheel. Soon, other farmers saw the same need.

His idea began to grow.

A Farm Magazine Ad Starts a Business

Stanley placed a small ad in a farm magazine.

The response showed that many farmers wanted cab protection. So, he began making cabs for major farm tractor brands.

That was the start of Original Tractor Cab.

Original Tractor Cab During World War II

World War II changed the work at the company.

The team made backpacks and other goods for the war effort. Then, after the war, the business returned to outdoor equipment products.

The company kept moving ahead.

Robert Williams Adds Snowblower Cabs

Stanley's son Robert helped grow the product line.

In the 1960s, he made and patented a cab for walk-behind snowblowers. So, the company began to serve a new type of outdoor machine.

Lawn and garden tractor cabs came soon after.

More Products for Lawn and Garden Work

Outdoor power tools changed through the years.

Small tractors and lawn mowers became common at homes and on large lots. So, Original Tractor Cab made more products for those machines.

The business grew beyond farm tractors.

Wayne Williams Adds Sunshades

The third generation brought more new ideas.

In the early 1990s, Stanley's grandson Wayne made and patented a sunshade for tractors and lawn and garden machines. As a result, the company could help in summer as well as winter.

Cab 12070 comes from that same line of work.

Three Generations of the Williams Family

The Williams family helped guide the firm through three generations.

Each new era brought new machines and new needs. Yet the main goal stayed much the same.

Make useful cover for people who work outdoors.

Made in the USA Since 1939

Original Tractor Cab is an American maker of outdoor equipment products.

Today, the firm makes hardtop cabs, soft cabs, snowblower cabs, mower sunshades, and tractor sunshades. Also, it makes products for many brands and models.

Its roots still go back to one Indiana farm.

Original Tractor Cab in Arlington, Indiana

The company is based in Arlington, Indiana.

More than eight decades have passed since Stanley made his first cab. Yet people who work outside still face sun, rain, snow, and wind.

That keeps the old idea useful.

From Farm Cabs to X300 Series Hardtop Cabs

A John Deere X300 Series tractor is far different from a farm tractor built in 1939.

Still, the person in the seat works outdoors. So, Original Tractor Cab now makes products such as Cab 12070 for lawn and garden work.

The machine changed, but the need for weather cover did not.

Dealer Sales Helped the Company Grow

Dealers helped Original Tractor Cab reach mower and tractor owners for many years.

They gave buyers a way to find model-fit products. Also, dealers helped owners learn which cab or shade fit their machine.

That network remains part of the company's story.

Shop Direct From Original Tractor Cab

Today, customers can also buy from the manufacturer.

OriginalCab.com helps owners find products by machine model. So, a buyer can look for the right cab and ask the maker for fit help.

That direct path gives owners another choice.

More Than Eight Decades of Outdoor Cover

Outdoor machines will keep changing.

Yet sun, rain, snow, and wind will still be part of the work. So, Original Tractor Cab keeps making products that help people work with more cover.

That goal began in 1939.

Read more on our Original Tractor Cab history page.

John Deere X300 Series Hardtop Cab 12070 FAQ

Which tractors fit Cab 12070?

The current Original Tractor Cab product page lists John Deere X330, X350, X370, X380, and X390 lawn tractors. The installation guide also names some older X300 Series models. Check your exact tractor before ordering.

Does Cab 12070 fit all-wheel-steer models?

No. Original Tractor Cab states that Cab 12070 does not fit all-wheel-steer models.

Does it fit the X350R?

No. The current product listing excludes the X350R.

Does it fit the X340?

The current product listing excludes the X340, while an older installation guide includes it. Ask Original Tractor Cab to confirm fit before ordering.

How tall is Cab 12070?

Original Tractor Cab lists a cab height of 73 inches. Check the full tractor height after installation.

How much does the cab weigh?

Cab 12070 weighs about 70 pounds.

What is the roof made from?

The cab uses an ABS plastic hardtop.

What are the windows made from?

The standard cab uses clear, shatter-resistant polycarbonate windows.

Does it have doors on both sides?

Yes. Cab 12070 has hinged doors on both sides.

Can I add a glass windshield?

Yes. Original Tractor Cab lists an optional safety glass windshield.

Can I add an electric wiper?

Yes. An electric wiper kit is an available option. Check current kit fit before ordering.

Are mirrors and lights available?

Yes. Original Tractor Cab lists optional mirror and light kits.

Do I need to drill holes?

No. Original Tractor Cab designed Cab 12070 for installation using existing mount points.

How long does installation take?

Original Tractor Cab estimates about three to four hours for normal installation.

Does the cab protect from rain and snow?

The cab helps shield the operator from normal rain, snow, sleet, and wind. Yet it is not sealed or waterproof.

Does the cab have a heater?

No. The standard cab does not include a heater.

Is Cab 12070 a rollover cab?

No. Cab 12070 does not provide certified rollover protection.

Does it protect from falling limbs or flying debris?

No. The cab does not provide certified impact, hail, or debris protection.

Is Cab 12070 a John Deere OEM part?

No. Original Tractor Cab makes this aftermarket enclosure for select John Deere X300 Series tractors.

Non-OEM and Liability Disclaimer

This is an aftermarket product produced by the Original Tractor Cab Co. Inc., it is not a genuine OEM item. This product will only protect from elements not rollover or debris.

Original Tractor Cab Co., Inc. is not affiliated with, sponsored by, or endorsed by Deere & Company. John Deere, X330, X350, X370, X380, and X390 are names used only to show intended product fit. All related marks belong to their owners.

Cab 12070 is for select John Deere X300 Series tractors only. Buyers must confirm the exact tractor model, serial number, seat, controls, and added tools before ordering.

This cab helps shield the operator from normal rain, snow, sleet, wind, and sun. Yet it is not sealed, heated, or waterproof.

The cab does not provide certified protection from rollover, falling limbs, flying debris, hail, thrown mower objects, collision, or severe weather. Keep all factory guards and safety parts in place.

The cab adds height to the tractor. So, check tree limbs, garage doors, trailers, and other low objects before use.

Engine exhaust can enter a cab. Never run the tractor in a closed space or use unsafe fuel heaters inside the cab.

Check the frame, roof, doors, windows, mounts, and bolts before each use. Stop using the product if any part is loose, worn, bent, or in the path of tractor controls.

Follow the current Original Tractor Cab installation guide and the John Deere operator manual for your tractor.

California Proposition 65 Warning

WARNING: Cancer and Reproductive Harm — www.P65Warnings.ca.gov.

This product and the tractor on which it is installed may expose users to chemicals known to the State of California to cause cancer, birth defects, or other reproductive harm. Sources may include engine exhaust, fuel, oils, vinyl, plastics, metals, and other tractor or cab parts. Follow all safety instructions and wash your hands after handling parts and fluids.