Kubota BX23S Cab Protection from Rain, Snow, Sleet and Wind

Help Stay Dry During Rain

Rain can start while you grade a drive or move soil. So, the hardtop roof helps block rain from above. The cab also adds a weather barrier around the operator area.

A dry seat can make a wet day feel less harsh. Also, less rain on your clothes can help you stay at ease as you work. Yet the cab may not seal out all wind-driven rain.

More Cover for Snow Removal

Snow can blow back as you clear a lane or drive. Then, cold wind may push it toward your face. So, Cab 12345 helps shield you from direct snow and wind.

The hardtop roof adds cover from snow above. Plus, the enclosure helps reduce direct exposure to harsh weather. Still, wear warm clothes and use care on ice.

Weather Protection from Sleet

Sleet can make a long job feel cold and wet. So, the cab gives you a place with more weather cover. Its roof helps block sleet from falling on the operator.

However, sleet may still enter through gaps or open panels. The cab does not make severe weather safe. Stop work when poor sight or ice creates a hazard.

Help Block Cold Wind

Wind can chill you fast on an open tractor. Therefore, a cab can help cut direct wind near your head and upper body.

This can make cold work feel more pleasant. Yet Cab 12345 is not a climate-controlled room. Dress for the weather each time you work.

More Comfort for Long Work Days

A large job may take hours. Rain, snow and wind can make that time feel long. So, a hardtop cab can add comfort to the day.

You can use the BX23S for many outdoor chores. Also, the cab can help reduce direct weather exposure during those tasks.

Original Tractor Cab 12345 Hardtop Cab Features

88-Inch Cab Height

Cab 12345 stands 88 inches high, as listed in our product details. So, the design gives the operator added space above the seat. The tall cab can also help create a more open feel.

Yet the full height matters when you store the tractor. Therefore, check the garage, shed and trailer clearance before you install the cab.

Extended Rear Hardtop Roof

The roof extends toward the rear of the tractor. So, it adds weather cover near the backhoe operator area. This design is a key feature of Cab 12345.

Also, the hardtop helps block rain and snow from above. However, the roof is not a falling-object guard. Never use it as one.

Removable Rear Panel for Backhoe Access

The Kubota BX23S has a rear backhoe for digging work. So, the cab needs to account for that rear work area. Cab 12345 has a rear panel that you can remove.

This feature helps provide access to the backhoe. Also, it makes the cab more useful for owners who switch between tractor and backhoe tasks.

Remove or fit the panel only as the cab guide directs. Then, check that the backhoe controls and operator area have full safe clearance.

Made for the Kubota BX23S

The BX23S has a compact frame, front loader and rear backhoe. So, it needs a cab that accounts for those parts. Cab 12345 serves this tractor loader backhoe model.

Yet not all BX23S machines have the same added parts. Check lights, mirrors, guards and other equipment before you install the enclosure.

Made in the USA

Original Tractor Cab makes Cab 12345 in the USA. Our company has made weather covers since 1939. So, this cab carries on a long line of products for outdoor equipment.

Three- to Four-Hour Installation

Our product details give an install time of about three to four hours. So, plan time to fit the frame and panels.

The real time may vary with your tools and skill. Also, take time to check the controls and backhoe clearance before use.

LTL Freight Delivery

Cab 12345 ships by LTL freight. This method helps move the large cab parts. So, plan for the delivery and a safe place to unload the shipment.

Check the shipment for damage when it arrives. Then, review the packing details before you start the install.

Kubota BX23S Cab for Property Care, Snow and Backhoe Work

Driveway and Lane Maintenance

Gravel drives need care after rain and snow. So, the BX23S can help move and grade loose stone. Cab 12345 adds weather cover while you work.

Also, the hardtop roof helps shield you from rain or light snow. Keep a clear view of the path ahead.

Snow Removal with a Kubota BX23S

Winter can bring deep snow. The BX23S can use compatible snow tools for property care. So, a cab can help reduce direct wind and snow on the operator.

Yet snow tools can throw ice, rocks and other debris. The cab is not a debris shield. Always follow the tool manual.

Backhoe Digging and Trenching

The BX23S backhoe can dig for drains, pipes and landscape work. So, access to the rear controls is a key need.

Cab 12345 has a removable rear panel for that purpose. However, the operator must follow the cab guide before backhoe use.

Also, always check for buried utilities before digging. Never work near an unsafe trench wall or slope.

Loader Work Around the Property

The BX23S front loader can move soil, mulch and other loose loads. So, the tractor can serve many yard jobs.

The cab helps block some wind and rain. Yet the operator still needs a clear view of the bucket and ground.

Farm and Garden Chores

A small tractor can help with many daily chores. So, owners use the BX23S for land care, garden work and light material handling.

Weather may change during those jobs. As a result, a cab can add value through more seasons.

Kubota BX23S Backhoe Cab 12345 Installation and Care

Read the Cab 12345 Installation Guide

First, park the tractor on level ground. Next, lower the loader and backhoe as the tractor manual directs. Then, stop the engine and let hot parts cool.

Lay out the cab parts and check the hardware. Also, follow each step in the correct order. Find the Cab 12345 guide in our Original Tractor Cab installation manual library .

Check the Backhoe Operator Area

The rear panel comes off to allow backhoe access. So, check the panel setup before you use the backhoe.

Make sure no cab part blocks a lever, seat movement or safe exit. Also, keep the work area clear of loose parts.

Check Loader and Tractor Controls

Move each control with the engine off first. Then, make sure the cab does not block its path. Also, check the steering, pedals and seat area.

Never alter a factory safety part to fit the cab. Stop the install if a mount or panel creates a hazard.

Keep Cab Panels Clean

Dust and mud can block your view. So, clean the cab panels as the product guide directs. Use a soft touch on clear window areas.

Avoid harsh cleaners and rough tools. Also, clear frost before you drive.

Check the Cab Frame and Hardware

Tractor vibration can loosen hardware over time. Therefore, check the cab frame and mounts often. Tighten loose parts as the guide directs.

Also, look for cracks, wear or damage. Fix any issue before you work.

Check Height Before Storage or Transport

Cab 12345 has an 88-inch listed height. So, check all low doors and roof beams. Also, measure the full tractor setup before you haul it.

Follow the cab and tractor transport guides. Never guess at bridge or trailer clearance.

Buy Kubota BX23S Backhoe Cab 12345 Direct from the Maker

Original Tractor Cab makes Cab 12345 for the BX23S. So, buying direct gives you a clear path to the product maker.

You can review fit, manuals and product details on our site. Also, our team can help with cab questions.

Browse our Kubota hardtop tractor cab collection for more weather cab options.

You can also compare our Kubota BX23S hardtop cab 12244 . This is a different cab design with its own backhoe access limits. So, compare both products before purchase.

Ready for more cover from rain, snow and wind? Choose Cab 12345 and check the live price, stock and shipping details on this product page.

Kubota BX23S Tractor Loader Backhoe Specifications

The Kubota BX23S is a sub-compact tractor loader backhoe. It has a diesel engine, four-wheel drive and a hydrostatic drive. So, the machine can serve many jobs on small properties.

Kubota offers the BX23S with a front loader and rear backhoe. Also, the tractor can use other compatible tools.

Kubota BX23S Engine

The BX23S uses a Kubota three-cylinder diesel engine. It has 21.6 gross horsepower. Plus, the engine uses liquid cooling.

Kubota lists 17.7 PTO horsepower for the BX23S. So, owners can match the tractor with tools that meet its power range.

Kubota BX23S Engine Displacement

The diesel engine has 54.8 cubic inches of displacement. This is about 898 cubic centimeters. Also, the engine uses three cylinders.

Follow the Kubota engine manual for oil, fuel and service needs.

Kubota BX23S Four-Wheel Drive

The BX23S has four-wheel drive. So, it can gain more traction on loose ground.

Yet mud, snow and ice can still cause slips. Use the right tires and drive speed for the job.

Kubota BX23S Hydrostatic Transmission

The BX23S uses a hydrostatic transmission, or HST. It has a high and low range with forward and reverse drive.

So, the operator can set a slow pace for loader work or close tasks. Always use care on slopes.

Kubota BX23S Travel Speed

Kubota lists a top forward speed of about 8.4 miles per hour. Reverse speed reaches about 6.5 miles per hour.

Yet speed alone does not mean the ground is safe. Slow down near people, holes and steep grades.

Kubota BX23S PTO

The BX23S has a rear PTO speed of 540 rpm. Also, its mid PTO runs at 2,500 rpm.

These drives can power compatible tools. So, always match each tool to the tractor specs.

Kubota BX23S Wheelbase

The BX23S has a 55.1-inch wheelbase. This compact size helps the tractor work in tight areas.

Yet the loader and backhoe add length to the full machine. Check the space before turning.

Kubota BX23S Tractor Width

Kubota lists a minimum tread width of about 45.1 inches. So, the BX23S can fit many small work areas.

However, added tools or cab parts may change the full width. Measure before using narrow gates.

Kubota BX23S Ground Clearance

The BX23S has about 6.5 inches of ground clearance at the front axle.

So, large rocks and deep ruts can still strike the machine. Watch the ground as you work.

Kubota BX23S Tractor Weight

Kubota lists a tractor weight of about 1,598 pounds in its BX Series data.

Yet the full loader, backhoe and cab setup will weigh more. So, check the full transport weight.

Kubota BX23S ROPS Height

Kubota lists a height of about 86.2 inches with the ROPS in its BX Series data.

Cab 12345 has its own 88-inch listed height. So, do not use the bare tractor height for cab clearance.

Kubota BX23S LA340 Front Loader

The BX23S can use the Kubota LA340 front loader. It has a pin-on bucket design.

Kubota lists a max lift height of about 71 inches. Also, its lift capacity at the pivot pin is 820 pounds at the stated test height.

Kubota BX23S LA340S Loader

The LA340S offers a quick-attach bucket setup. It also has a 71-inch max lift height.

Kubota lists a lift capacity of 699 pounds at the stated pivot pin test point.

So, check the loader model before you use its lift data.

Kubota BX23S BT603 Backhoe

The Kubota BT603 backhoe serves the BX23S. It can dig trenches, holes and other small earthwork jobs.

Kubota lists a digging depth of about six feet two inches in its full-line brochure.

Also, the backhoe has a reach of about 102.8 inches from the swing pivot.

Kubota BT603 Backhoe Bucket Sizes

Kubota lists 8-inch, 12-inch and 16-inch bucket options for the BT603. So, owners can choose a bucket for the task.

A narrow bucket can help dig a small trench. Meanwhile, a wider bucket can move more soil in each pass.

Kubota BT603 Backhoe Transport Height

The BT603 has a listed transport height of about 67.7 inches. Yet the full tractor and cab stand much taller.

So, check the whole machine before you haul or store it.

Kubota BX23S Mower Options

The BX23S can use compatible mid-mount mower decks. Kubota lists 54-inch and 60-inch mower options.

So, the tractor can serve lawn care as well as loader and backhoe work.

Official Kubota BX23S Tractor Specifications

Kubota provides model details on its official Kubota BX23S tractor page . Review the engine, drive and loader data there.

You can also see the official Kubota BX Series specification brochure for BX23S engine, loader and backhoe specs.

These specs describe the Kubota BX23S and its listed tools. They do not replace the operator manual.

The History of Original Tractor Cab Company Since 1939

Stanley Williams Starts a New Idea

Original Tractor Cab began in 1939. Farmer Stanley Williams needed more cover from harsh weather. So, he built a cab for his own tractor.

Other farmers soon saw the value of his idea. They also wanted weather cover for their machines.

As a result, one useful farm idea grew into a new company.

Weather Protection Born on a Farm

Farm work does not stop each time rain or snow begins to fall. So, Stanley made a cab to help block the weather.

The first cab served a clear need. Also, it gave other farmers a new way to work with more cover.

A Small Idea Begins to Grow

Stanley placed a small ad in a farm magazine. Then, farmers began to ask for similar cabs.

So, the new company began to grow. Yet the main goal stayed the same. Help outdoor workers face harsh weather.

Original Tractor Cab During World War II

World War II brought new needs for goods and supplies. So, the company changed its work to help the war effort.

Original Tractor Cab made canvas goods and military packs. Then, after the war, the company went back to making weather cabs.

More Cabs for More Machines

Tractors and outdoor tools changed over time. So, the company grew its cab line.

New products served lawn tractors, snowblowers and other work machines. Also, new designs helped more owners add weather cover.

Snowblower Cabs Add Winter Protection

Snowblowers became more common at homes and work sites. Yet their operators still faced blowing snow and cold wind.

So, Original Tractor Cab added snowblower weather enclosures. These products helped shield the operator from winter weather.

Sunshades for Warm Weather Work

Cold weather was not the only need. Hot sun could make long days feel harsh.

Therefore, the company added sunshades to its product line. These shades help block direct sun from above.

Three Generations of Family Work

The Williams family kept the company going through three generations. Each new era brought new tools and new customer needs.

Yet the main goal stayed much the same. Make useful weather covers for people who work outdoors.

Made in Arlington, Indiana

Original Tractor Cab is based in Arlington, Indiana. We take pride in our long history of American manufacturing.

Today, our range includes tractor cabs, snowblower cabs, mower enclosures, sunshades and cab parts.

From Dealer Sales to Buying Direct

Dealers have helped us reach owners for many years. Now, our website also gives buyers a direct way to shop.

So, you can find product details, fit guides and support from the maker. Also, you can shop for the cab that fits your machine.

Kubota BX23S Cab 12345 Carries On the Tradition

The Kubota BX23S is far more advanced than tractors from 1939. Yet rain, snow and wind still make outdoor work feel hard.

So, Cab 12345 brings that old idea to a modern tractor loader backhoe. It helps shield the operator from harsh weather.

Read more on our Original Tractor Cab company history page .

Original Tractor Cab — Made RIGHT in USA Since 1939!

Kubota BX23S Backhoe Cab 12345 Frequently Asked Questions

Does Cab 12345 fit the Kubota BX23S?

Yes. Original Tractor Cab makes Cab 12345 for the Kubota BX23S tractor loader backhoe. Still, check any added tractor equipment before installation.

How tall is the Kubota BX23S Cab 12345?

The cab has a listed height of 88 inches. So, check garage and trailer clearance before use.

Can I use the BX23S backhoe with this cab?

Cab 12345 has a removable rear panel for backhoe access. So, follow the cab guide to set up the rear area.

How long does installation take?

Our product details list about three to four hours. Yet the real time may vary with tools and experience.

Does the cab help block snow and rain?

Yes. The hardtop cab helps shield the operator from rain, snow, sleet and cold wind. Yet it may not seal out all weather.

Is Cab 12345 a Kubota OEM product?

No. Original Tractor Cab makes this aftermarket cab. It is not a genuine Kubota OEM item.

How does Cab 12345 ship?

This cab ships by LTL freight. So, plan for the delivery and a safe unloading area.

Does the cab protect from rollover or debris?

No. Cab 12345 provides weather cover only. It is not a rollover guard or debris shield. Keep all factory safety parts in place.

Order Your Kubota BX23S Backhoe Hardtop Cab 12345

Rain, snow and cold wind can make outdoor work hard. So, add more weather cover to your Kubota BX23S.

Cab 12345 has an 88-inch height, an extended rear hardtop and a removable rear panel. Plus, we make it in the USA.

Buy direct from Original Tractor Cab. Check the live price, order status and freight details on this page.