Cab Height

80"

Massey Ferguson GC1705 & GC1715 Hardtop Cab 11910

Turn your Massey Ferguson GC1705 or GC1715 into a better cold-weather work machine with the Original Tractor Cab Hardtop Cab 11910.

Rain, snow, sleet, and cold wind can make tractor work hard. However, your work does not stop just because the weather turns bad. So, Original Tractor Cab designed Cab 11910 to add useful foul-weather protection around the operator of the Massey Ferguson GC1705 and GC1715.

The cab has a solid ABS hardtop, clear windows, hinged doors, and durable vinyl panels. In addition, its model-specific mounting system uses existing points on the tractor. Therefore, you do not need to drill holes to install the cab.

Installation takes about three to four hours. Once installed, Original Tractor Cab lists the total cab height at about 80 inches.

Best of all, this is not a universal tractor cab. Cab 11910 is made for the Massey Ferguson GC1705 and GC1715.

Buy the Massey Ferguson GC1705 & GC1715 Hardtop Cab 11910 direct from Original Tractor Cab.

Original Tractor Cab 11910 for Massey Ferguson GC1705 and GC1715

A sub-compact tractor can work during every season.

You may mow grass in summer. Then, fall brings leaves, dirt, and property work. Winter may bring snow removal, cold wind, and frozen ground.

Yet an open tractor puts the operator right in that weather.

Cab 11910 helps solve that problem.

Its enclosure creates a barrier between you and rain, snow, sleet, and cold wind. Meanwhile, large clear windows help you keep a wide view of the tractor and work area.

As a result, your Massey Ferguson can remain useful when the weather gets cold and wet.

Made Specifically for the GC1705 and GC1715

Fit comes first.

Original Tractor Cab identifies part 11910 for the Massey Ferguson GC1705 and GC1715. The Original Tractor Cab installation manual also identifies both tractors as applications for Cab 11910.

Farm & Trail independently lists the same OT-11910 application for the GC1705 and GC1715.

Therefore, you do not need to adapt a generic tractor enclosure to your machine.

Still, check your tractor model before ordering. Equipment can be changed by prior owners, and added accessories can affect fit.

If you have a fit question, use the Original Tractor Cab contact page before you order.

All-Weather Cab Protection for Your Massey Ferguson

Winter tractor work can be rough.

Cold wind can reach the operator from every side. Likewise, blowing snow can make a short job feel much longer.

Rain and sleet create another problem.

Cab 11910 adds coverage around the operator station. Therefore, it can make cold-weather tractor work more pleasant than operating from a fully open seat.

Farm & Trail describes this cab as providing protection from wind, blowing snow, rain, and sleet.

That makes the enclosure useful for snow removal, winter property care, farm chores, loader work, and other cold-weather jobs.

Fully Enclosed Hardtop Cab

Cab 11910 surrounds the operator area with a combination of clear windows and vinyl panels.

Above you sits a molded ABS plastic hardtop.

So, the enclosure provides more than a windshield alone.

Weather can come from the front, side, rear, and above. For that reason, a full enclosure gives the operator much broader foul-weather coverage.

However, Cab 11910 is a weather enclosure. It is not a sealed automotive cab, ROPS, FOPS, or rollover protection system.

Strong 16-Gauge Steel Tube Cab Frame

A good enclosure needs a sound structure.

For that reason, Cab 11910 uses a 16-gauge steel tube frame. Farm & Trail confirms this construction in its product information.

The frame supports the roof and enclosure around the operator.

In addition, the Original Tractor Cab parts manual shows model-specific feet, front posts, rear posts, braces, cross bars, boxing posts, a top frame, and a ROPS mounting system.

Therefore, Cab 11910 is much more than a loose cover.

It is a structured enclosure made around these Massey Ferguson tractors.

Durable Rip-Stop Vinyl Cab Material

Outdoor equipment lives in a hard environment.

Sun, dirt, moisture, cold, and changing temperatures are part of normal tractor use.

So, cab material needs to stand up to outdoor work.

Farm & Trail describes the fabric on Cab 11910 as a strong, lightweight rip-stop vinyl that resists abrasion, water, mildew, and rot.

That material forms an important part of the enclosure.

Meanwhile, the clear window areas give you visibility around the tractor.

Together, those materials create a practical foul-weather cab without the weight of a full factory-style steel enclosure.

Molded ABS Plastic Hardtop

The solid roof is one of the main features of Cab 11910.

Farm & Trail identifies the top as molded ABS plastic with a UV inhibitor.

A hardtop gives you solid overhead coverage.

Therefore, snow, rain, and direct overhead weather have a physical barrier above the operator.

The ABS roof also gives the enclosure a clean, finished look.

Clear Shatter-Resistant Lexan Windows

Visibility matters on any tractor.

You need to see where you are driving. In addition, you need a clear view of the loader, mower, snow equipment, buildings, trees, people, and other objects around the machine.

Cab 11910 uses clear shatter-resistant Lexan material in the rear curtain, side doors, and standard windshield. Original Tractor Cab confirms those features on the current product page.

As a result, you gain weather coverage without giving up the wide view needed for tractor work.

Forward-Sloping Windshield

The windshield does more than block weather.

Original Tractor Cab slopes it forward.

That forward angle helps reduce glare. In addition, Original Tractor Cab states that the design reduces contact with falling rain and snow.

Therefore, the shape itself serves a useful purpose.

The result is a simple design made around real outdoor work.

Optional Safety-Glass Windshield

Owners who want to upgrade the standard Lexan windshield have another choice.

Farm & Trail lists Original Tractor Cab Safety Glass Windshield 10120 as an available upgrade for Cab 11910.

A safety-glass windshield also opens the door to compatible wiper options.

For example, Original Tractor Cab offers manual and electric wiper systems for compatible safety-glass windshield applications.

Current accessories and compatibility can change. Therefore, check the product information before ordering an accessory.

You can browse Original Tractor Cab accessories for current choices.

Hinged Doors Make Entry Easy

A cab should not make getting onto your tractor hard.

Cab 11910 uses hinged doors with latches.

Open the door, enter the tractor, and close it behind you.

Original Tractor Cab specifically notes that the hinged and latched doors make entry and exit easy and quick.

That simple feature matters during everyday use.

You may get on and off the tractor many times during a job. Therefore, easy access can make the enclosure much more practical.

No Drilling Required

Many tractor owners do not want to drill holes in their machine.

Cab 11910 avoids that problem.

Farm & Trail states that the cab mounts using existing holes. Therefore, drilling is not required when the enclosure is installed as designed on a compatible GC1705 or GC1715.

That is a major benefit for a direct-to-consumer product.

You can add a model-specific enclosure without creating unnecessary drilled mounting holes in your tractor.

Cab 11910 Installation

Plan on about three to four hours for normal installation.

Both Original Tractor Cab and Farm & Trail give roughly the same installation estimate.

Do not rush the job.

Instead, read the instructions before you start. Then, identify each frame part and fastener.

Correct assembly matters for fit and safe use.

Original Tractor Cab maintains product instructions on its installation manuals page.

Check the Cab Hardware

Tractors create vibration during normal use.

Therefore, inspect cab mounting hardware from time to time.

Loose hardware can affect fit and may damage parts.

Check the enclosure before use. In addition, inspect it after transport, storage, or seasonal installation.

Good basic care can help Cab 11910 serve you for many seasons.

Remove Vinyl Panels Before Open Transport

This point is important.

The Original Tractor Cab 11910 manual warns owners to remove the vinyl panels before transporting the tractor on an open truck or trailer.

Road-speed wind creates much greater force than normal tractor operation.

Therefore, never treat the cab panels as parts designed for highway-speed airflow.

Remove the required panels before open transport and follow the instructions supplied with the cab.

Cab Height and Overhead Clearance

A cab makes your tractor taller.

Original Tractor Cab currently lists the GC1705 and GC1715 Cab 11910 height at about 80 inches.

That measurement is important.

A tractor that once passed through a garage door or shed opening may have less room after the cab is installed.

So, measure your actual machine after installation.

Check garage doors, barns, trailers, low tree limbs, storage areas, and other overhead objects before driving under them.

Tires and tractor setup may also affect final height.

Therefore, use the 80-inch figure as product guidance, but verify the finished height of your own tractor.

Massey Ferguson GC1705 and GC1715 Specifications

The Massey Ferguson GC1705 and GC1715 belong to the GC1700 Series of sub-compact tractors.

These machines were designed to give property owners real tractor functions in a small package.

Historical Massey Ferguson material described the GC1700 Series as useful for mowing, loading, backhoe work, snow blowing, and other property jobs.

That range of work helps explain why a foul-weather cab makes sense.

A tractor used for summer mowing may also clear snow in January.

For current Massey Ferguson compact tractor information, visit the official Massey Ferguson tractor website.

You can also review the manufacturer's current Massey Ferguson GC1700 Series information. Current GC1700 models differ from the legacy GC1705 and GC1715, so use the operator manual for your exact tractor when an exact specification matters.

Massey Ferguson GC1705 Engine

The GC1705 uses a 1.1-liter, three-cylinder, liquid-cooled Iseki diesel engine.

Historical specifications rate gross engine output at 22.5 horsepower at 2,600 rpm. PTO output is listed at about 18.7 horsepower.

That power helped make the GC1705 useful for far more than mowing.

Owners could use the tractor for loader work, property care, snow work, and compatible three-point equipment.

Therefore, the GC1705 became a true year-round property tractor.

Massey Ferguson GC1715 Engine

The GC1715 adds more power.

Historical AGCO specifications rate the GC1715 at 25 gross engine horsepower. PTO output is about 19.6 horsepower.

Like the GC1705, it uses a compact three-cylinder diesel design.

That extra power made the GC1715 a strong choice for owners who wanted a small tractor with broad capability.

Two-Range Hydrostatic Transmission

Both tractors use a two-range hydrostatic transmission.

That system makes forward and reverse movement easy to control.

Historical Massey Ferguson literature also identifies side-by-side foot pedals and cruise control as part of the GC1700 design.

A hydrostatic transmission can be especially useful during loader work and snow removal because those jobs often require frequent changes in direction.

Four-Wheel Drive

Both the GC1705 and GC1715 use four-wheel drive.

That feature adds useful traction for work on loose soil, wet ground, snow, and other difficult surfaces.

Of course, four-wheel drive does not remove the need for safe operation.

Still, it adds useful capability to a small tractor.

Poor ground conditions also tend to arrive with poor weather. Therefore, an aftermarket cab and a four-wheel-drive sub-compact tractor can make a practical combination for winter property work.

GC1705 and GC1715 Hydraulic Systems

The GC1705 uses an open-center hydraulic system with historical total flow listed at about 6.3 gallons per minute.

Meanwhile, historical specifications list the GC1715 at about 6.9 gallons per minute.

Those hydraulic systems support the tractor's work functions and compatible loader applications.

Exact equipment can vary.

So, use the tractor serial number and Massey Ferguson documentation when you need exact hydraulic or service data.

Category I Three-Point Hitch

Both tractors use a Category I three-point hitch.

Historical AGCO specifications list lift capacity at the link ends at about 1,190 pounds.

That gives these small tractors access to a useful range of rear implements.

Owners can match the tractor with equipment for property care, landscaping, soil work, and other jobs.

GC1705 and GC1715 Weight

Historical AGCO information lists tractor weight at about 1,433 pounds for both the GC1705 and GC1715 tractor configurations.

Attachments, loaders, ballast, tires, fluids, and other equipment can increase actual operating weight.

Therefore, never use the basic tractor weight when calculating trailer capacity or total transport weight without accounting for installed equipment.

Why Cab 11910 Makes Sense on a GC1700 Tractor

The GC1705 and GC1715 were made to do many jobs.

That means owners often use them during more than one season.

A mower may come off in fall. Then, a loader or snow tool may go on.

However, the open operator station does not change when the temperature drops.

Cab 11910 does.

It gives the operator a barrier from rain, snow, sleet, and cold wind.

As a result, owners can get more comfort from a tractor they already know and use.

Buy Massey Ferguson Cab 11910 Direct From Original Tractor Cab

Original Tractor Cab makes Cab 11910.

So, buying direct connects you with the company behind the enclosure.

That matters when you have a fit question. Likewise, it helps when you need installation information or compatible accessories.

You can also browse the Original Tractor Cab Massey Ferguson collection for other cab and sunshade choices.

Cab 11910 gives GC1705 and GC1715 owners a way to add useful foul-weather coverage without replacing a good tractor.

For many owners, that is the real value.

The History of Original Tractor Cab Company

Original Tractor Cab has roots that reach back to 1939.

The story began with farmer Stanley Williams.

Williams needed better weather protection while using his own tractor. So, he designed a cab for it.

Other farmers soon saw the value of the idea.

He placed a small advertisement in a farm magazine, and the response helped turn his practical solution into a business. The Indiana Chamber of Commerce confirms this history and dates Original Tractor Cab to 1939.

You can read more on the Original Tractor Cab About Us page.

Born From a Real Need on the Farm

Original Tractor Cab did not begin with a boardroom idea.

It began with a farmer who needed a better way to work outside.

Rain, snow, wind, cold, and sun were normal parts of farm life.

Therefore, operator weather protection had clear value.

Other farmers had the same problem.

Demand grew, and Stanley Williams began making cabs for major tractor brands of that era.

That practical focus still defines the company today.

Original Tractor Cab During World War II

World War II changed the young company.

Normal tractor cab production stopped.

Instead, Original Tractor Cab shifted manufacturing to support the war effort.

The company produced canvas items for military use.

After the war, the business returned to products for outdoor equipment operators.

Yet tractors and customer needs continued to change.

So did Original Tractor Cab.

The Next Generation and Snow Blower Cabs

During the 1960s, Stanley's son Robert Williams developed another product.

He designed and patented a cab for walk-behind snow blowers.

That product moved the company into another part of the outdoor equipment market.

Soon, Original Tractor Cab also added products for lawn and garden tractors.

The company was no longer serving only traditional farm tractors.

Instead, it was building operator weather products for many kinds of outdoor machines.

The Third Generation and Tractor Sunshades

The company continued to evolve.

In the early 1990s, Stanley's grandson Wayne Williams developed and patented a sunshade for tractors and lawn and garden equipment.

That helped Original Tractor Cab serve customers during warm weather as well as winter.

Today, the company makes cab enclosures, hardtop cabs, soft cabs, mower sunshades, tractor sunshades, snow equipment enclosures, and related accessories.

Yet the basic idea has stayed remarkably simple.

We make useful products for people who work outdoors.

Made in the USA by Original Tractor Cab

Original Tractor Cab continues to manufacture products in the United States.

The company is based in Arlington, Indiana, and its history now spans more than eight decades.

Cab 11910 is part of that history.

It takes the same basic idea that started the company in 1939 and applies it to the Massey Ferguson GC1705 and GC1715.

Protect the operator from bad weather so the machine can keep working.

Frequently Asked Questions About Massey Ferguson Cab 11910

Does Cab 11910 fit the Massey Ferguson GC1705?

Yes. Original Tractor Cab identifies Hardtop Cab 11910 for the Massey Ferguson GC1705. The product listing and installation information both confirm that application.

Does Cab 11910 fit the Massey Ferguson GC1715?

Yes. The GC1715 is also a listed application for Original Tractor Cab 11910.

Does installation require drilling?

No. Farm & Trail states that the cab mounts using existing holes, so drilling is not required when Cab 11910 is installed as designed.

How long does Cab 11910 take to install?

Plan on about three to four hours. Original Tractor Cab and Farm & Trail publish the same general installation range.

How tall is the GC1705 or GC1715 with Cab 11910?

Original Tractor Cab currently lists the cab height at about 80 inches. However, always measure your actual tractor after installation because tire and equipment setup can affect final clearance.

What are the standard cab windows made from?

Original Tractor Cab uses clear, shatter-resistant Lexan in the standard windshield, doors, and rear curtain.

Is a safety-glass windshield available?

Yes. Farm & Trail lists Original Tractor Cab Safety Glass Windshield 10120 as an optional upgrade for this cab.

Can I add a windshield wiper?

Compatible manual and electric wiper kits are available when the required safety-glass windshield is installed. Check current accessory compatibility before ordering.

Can I haul the tractor with the vinyl panels installed?

No. The Cab 11910 manual instructs owners to remove the vinyl panels before transporting the tractor on an open truck or trailer.

Does Cab 11910 provide rollover protection?

No. Cab 11910 is an aftermarket foul-weather enclosure. It is not a ROPS, FOPS, rollover protection system, or falling-object protection system.

Is Cab 11910 a genuine Massey Ferguson factory cab?

No. Original Tractor Cab Co., Inc. manufactures Cab 11910 as an aftermarket enclosure for compatible Massey Ferguson GC1705 and GC1715 tractors.

California Proposition 65 Warning

WARNING: Cancer and Reproductive Harm.

California Proposition 65 requires warnings when a product can expose a person to chemicals that California lists as causing cancer, birth defects, or other reproductive harm.

Original Tractor Cab should display the current product-specific Proposition 65 warning that applies to the actual materials and expected chemical exposures associated with Cab 11910.

For official information, visit California's Proposition 65 warning program.

This general notice does not replace a product-specific safe-harbor warning when California law requires one.

Important Non-OEM and Liability Disclaimer

This is an aftermarket product produced by Original Tractor Cab Co., Inc. It is not a genuine Massey Ferguson or AGCO OEM cab, nor is it a factory-installed Massey Ferguson operator enclosure.

Cab 11910 is designed to provide foul-weather protection from conditions such as rain, snow, sleet, and cold wind. It does not provide protection from noise, exhaust fumes, chemicals, rollover, collision, falling objects, flying debris, or other accidents.

Cab 11910 is not a ROPS, FOPS, rollover protection device, falling-object protection device, collision protection system, or substitute for any factory safety equipment.

Never alter, drill, cut, weld, remove, bypass, or defeat the tractor's ROPS, seat belt, guards, shields, interlocks, or other factory safety systems to install or use this cab.

Install Cab 11910 only as directed by Original Tractor Cab. In addition, follow all Massey Ferguson operating instructions, safety warnings, and maintenance requirements.

Remove the vinyl panels before transporting the tractor on an open truck or trailer. Also, remember that adding the cab increases tractor height. Check garages, barns, trailers, tree limbs, buildings, and all other overhead obstacles before operating the tractor.

The operator remains responsible for safe tractor operation, correct cab installation, adequate ventilation, inspection of mounting hardware, overhead clearance, safe transport, and confirmation that Cab 11910 is compatible with the tractor before use.

Massey Ferguson is a trademark of AGCO Corporation or its affiliates. Original Tractor Cab Co., Inc. is an independent aftermarket manufacturer.