Massey Ferguson GC1723E Hard Top Cab 12168 by Original Tractor Cab

Cold air can turn a short tractor job into a hard task. However, Cab 12168 helps shield the operator from harsh wind and wet weather. The full enclosure lets you work with more comfort through fall, winter, and spring.

Rain and sleet can also slow work fast. Therefore, the firm ABS plastic roof helps keep direct rain and snow off the seat area. Its hard surface gives the enclosure a strong top while you mow, haul, clear snow, or care for land.

Snow often makes open-station work feel much colder. Yet this Massey Ferguson cab forms a covered space around the operator. The enclosure can help reduce direct contact with snow, cold air, and light yard debris.

Cab 12168 fits the Massey Ferguson GC1723E and GC1725M. Still, it does not fit the GC1723EB or GC1725MB backhoe models. Check the full model name on your tractor before you place an order.

Clear Lexan Panels Support a Wide View

Clear, shatter-resistant Lexan plastic forms the windshield, side doors, and rear curtain. As a result, the operator can see the path and work area from inside the cab. A clear view also helps with close work near a drive, shed, fence, or yard.

The windshield tilts forward by design. Thus, it can help cut glare and reduce contact with falling rain or snow. This shape also gives the front of the cab a clean and useful form.

Wide clear areas help you check the space around the tractor. Moreover, you can keep sight of nearby people, pets, tools, and fixed items. Always turn and look before you back up.

Hinged Doors Make Entry Simple

Hinged side doors give you fast access to the tractor seat. In addition, each door has a latch that helps hold it in place. The simple design makes it easy to get in or out during a long workday.

Strong 16-gauge steel tube frames support the soft enclosure. Meanwhile, the cab fabric resists water, flame, mildew, and rot. Proper care will help the panels, fabric, and frame last longer.

Keep each clear panel clean with mild soap, water, and a soft cloth. However, do not use dry paper towels, rough pads, or harsh cleaners on Lexan. Those items may haze or scratch the clear surface.

No-Drill Model-Fit Installation

Cab 12168 mounts without drilling holes in the tractor. Therefore, the model-fit hardware helps make the job clear and direct. Read the full guide before you start, then sort the parts in a clean area.

Most owners should plan on three to four hours for the first install. Still, tools, skill, and tractor setup can change the time. A second adult can help hold the roof and frame parts during the job.

Seasonal removal takes about 45 minutes in normal shop conditions. As a result, you can take off the enclosure when warm weather returns. Store all parts in a clean and dry place.

Before work begins, set the parking brake and turn off the engine. Next, remove the key and let hot parts cool. Follow the supplied guide during each step.

View our tractor cab installation manuals for more help. If you still have fit questions, please contact Original Tractor Cab before you order.

Massey Ferguson Cab 12168 Details

Confirm Cab Fit Before You Buy

First, find the model tag on your Massey Ferguson tractor. Then, check the full model code for an E, M, EB, or MB ending. These letters matter when you select a cab.

Cab 12168 fits the GC1723E and GC1725M tractors. However, it will not fit the GC1723EB or GC1725MB models with the backhoe setup. Added lights, mirrors, controls, or other parts may also affect fit.

For more model-fit products, shop our Massey Ferguson tractor cab collection. You can also view tractor cab accessories for work lights and other useful items.

The Massey Ferguson GC1723E is a small subcompact tractor. Yet it gives owners enough power for many home, farm, and land care jobs. Its low size also helps it work in yards and other tight spots.

A three-cylinder, 1.1-liter diesel engine powers the tractor. In fact, the engine makes 22.5 rated horsepower. The rear PTO supplies 18.3 horsepower for approved tools.

The GC1723E uses a two-range hydrostatic drive. Therefore, the operator can change ground speed with simple pedal control. This setup works well for mowing, loader use, and jobs that need many speed changes.

For full factory details, visit the official Massey Ferguson MF 1GC Series page. Owners who clear snow can also review Massey Ferguson snow-removal tools.

GC1723E Engine and Performance Data

Factory data may change with model year and market. Thus, the tractor tag and operator manual must serve as the last word for your unit. Never use general web data to set a safe load limit.

A Small Tractor Built for Many Jobs

The GC1723E can help mow grass, move mulch, grade soil, and tend a drive. Likewise, its rear hitch can run many approved tools. Owners can change jobs without moving to a large farm tractor.

Its hydrostatic drive suits work that calls for close control. For example, the operator can slow down near a wall or tree, then gain speed in an open area. Easy speed changes can also help during loader work.

Four-wheel drive adds grip on loose or wet ground. However, extra grip does not stop all slips. Reduce speed on ice, snow, hills, and soft soil.

Cold-weather tools make the tractor more useful through winter. For instance, Massey Ferguson lists snow blowers and front blades for the GC line. Cab 12168 can help keep wind and falling snow away from the operator during those jobs.

Safe Use with the Hardtop Cab

Always keep a clear path to each tractor control. Also, make sure the doors open and close before you start the engine. Never use the cab if a loose part blocks your sight or movement.

This enclosure does not replace the tractor’s rollover protection system. Therefore, do not remove or alter the factory ROPS to make the cab fit. Use the seat belt as directed in the Massey Ferguson manual.

Branches and low doors can strike the roof. So, measure the full tractor height after installation. Allow more space than the measured height when you pass below an object.

Original Tractor Cab began in 1939. At the time, Indiana farmer Stanley Williams needed more cover from harsh weather. So, he made a cab for his own tractor.

Nearby farmers soon saw his new cab. Then, they asked how they could get one for their tractors. Stanley placed a small ad in a farm magazine to test the demand.

The reply was strong. As a result, Stanley started a company that made cabs for the leading tractor brands of that time. A simple farm need had grown into an American business.

During World War II, the company used its skill to aid the war effort. Its workers made packs and other goods for military use. Afterward, the firm went back to making products for people who work outdoors.

Tractors and outdoor equipment changed through the years. Therefore, Original Tractor Cab kept adding model-fit designs. Its range grew to include hardtop cabs, soft enclosures, sunshades, and cab accessories.

The company still works in Arlington, Indiana. Moreover, its products reflect more than eight decades of cab design and shop skill. American production remains a key part of the brand.

Today, Original Tractor Cab serves tractor, mower, and utility equipment owners across the nation. Yet the main goal stays much the same: help people work with more cover from the weather. Read the full story on our Original Tractor Cab history page.

Which Massey Ferguson tractors fit Cab 12168?

Cab 12168 fits the Massey Ferguson GC1723E and GC1725M. However, it does not fit the GC1723EB or GC1725MB backhoe models.

Does the cab need holes drilled in the tractor?

No. The model-fit cab mounts without drilling. Still, follow the supplied guide and confirm all mount points before you begin.

How long does the cab take to install?

A normal first install takes about three to four hours. Yet the time can change with your tools, skill, and tractor setup.

Can I remove the enclosure for summer?

Yes. Removal takes about 45 minutes in normal shop conditions. Store the clean and dry parts in a safe area until you need them again.

What are the clear cab panels made from?

The windshield, side doors, and rear curtain use clear, shatter-resistant Lexan plastic. Use mild soap, clean water, and a soft cloth when you wash them.

Is Cab 12168 an OEM Massey Ferguson cab?

No. Original Tractor Cab makes this aftermarket enclosure for the listed Massey Ferguson models. Massey Ferguson does not make, sponsor, or endorse Cab 12168.

Non-OEM and Liability Disclaimer

This is an aftermarket product made by Original Tractor Cab Co., Inc. It is not a genuine OEM Massey Ferguson or AGCO product. Massey Ferguson, AGCO, and all related names and marks belong to their owners and serve only to show product fit.

The buyer must confirm the tractor model, ROPS type, attachments, and clear space before purchase and use. Model year changes, dealer-added parts, lights, mirrors, controls, tires, backhoes, loaders, and prior changes may affect fit. Stop the installation if any cab part blocks a control, safety label, light, ROPS part, or safe exit.

This cab offers protection from normal weather only. It will not protect the operator from a rollover, collision, falling object, thrown debris, chemical spray, fire, or other harmful event. The cab is not a certified rollover protective structure, falling-object guard, or safety cab.

Never remove, drill, cut, weld, bend, or change the factory ROPS to install this product. Follow the tractor manual, cab guide, and all safety rules. Original Tractor Cab Co., Inc. is not liable for harm, loss, or damage caused by poor fit checks, wrong installation, misuse, unsafe operation, altered equipment, or failure to follow the supplied instructions.

California Proposition 65 Warning

WARNING: This product can expose you to chemicals, including chemicals known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, visit www.P65Warnings.ca.gov.