Weather Cab for Compatible MTD Two-Stage Snowblowers

Snow removal puts the operator right behind the machine. That position works well for control, but it also puts you close to blowing snow.

Wind can push fine snow back into your face and coat. Likewise, sleet can hit you during a storm. Cold air can make a long job feel even longer.

Cab 9550 adds a weather barrier around much of the operator area. Therefore, less direct snow, sleet, and wind can reach you during normal snow removal.

Made for MTD Two-Stage Walk-Behind Snowblowers

Original Tractor Cab designed Cab 9550 for compatible MTD two-stage walk-behind snowblowers. MTD has made many snowblower models through the years, so exact model identification matters.

Do not choose a cab by color or brand name alone. Instead, check the machine model number before you order.

MTD states that the model tag on most two-stage snow throwers is on the bottom of the main gear housing. That area is also known as the belly pan or service access plate.

Also Fits Compatible Cub Cadet Two-Stage Snowblowers

MTD has produced snow equipment under several well-known names. Cub Cadet is one important part of that equipment family.

Original Tractor Cab also markets Cab 9550 as an economical weather cab for compatible Cub Cadet walk-behind two-stage snowblowers. Therefore, some older Cub Cadet machines can use this enclosure.

Exact fit still depends on machine design. So, confirm the model before you buy.

Does Not Fit Newer Cub Cadet 2X and 3X Dual LED Models

Newer snowblower designs can change cab fit. For that reason, Original Tractor Cab gives an important limit for Cab 9550.

This enclosure does not fit newer Cub Cadet 2X and 3X snowblowers equipped with dual LED headlights. The newer machine layout differs from the older designs covered by Cab 9550.

Therefore, do not force Cab 9550 onto one of these excluded machines. Use only a cab made for the exact snowblower.

Optically Clear Window Material

A clear view is vital when you clear snow. So, Cab 9550 uses optically clear window material in front of the operator.

The large clear area helps you watch the path ahead. Likewise, it helps you see the chute, driveway edge, vehicles, walls, garage doors, and people nearby.

Snow or ice can still block the view. Therefore, stop the machine whenever you cannot clearly see the work area.

Shatter-Resistant Clear Material

Original Tractor Cab describes the clear window material as shatter resistant. That makes it well suited to a flexible snowblower enclosure.

However, shatter resistant does not mean impact proof. The clear panel is not a debris shield or safety glass guard.

Never depend on the cab to stop stones, ice, sticks, or other objects thrown by snow equipment.

Nylon-Reinforced Rip-Stop Vinyl

Cab 9550 uses nylon-reinforced rip-stop vinyl. The flexible material helps form the weather barrier around the operator.

Rip-stop construction also helps limit damage if the material gets a small tear. Meanwhile, the flexible design keeps the cab light.

Check the vinyl before winter use. Repair or replace damaged material before you return the cab to service.

16-Gauge Steel Tube Construction

A cab needs a firm frame to hold its shape. Cab 9550 uses 16-gauge, 1/2-inch steel tubing for that job.

The steel structure supports the clear window and vinyl material. As a result, the enclosure can stay around the operator while the snowblower moves.

Check the frame and hardware from time to time. Tight mounts help keep the cab in the correct position.

Made in the USA

Original Tractor Cab makes Cab 9550 in the United States. American production has been part of the company story since its early years.

That long history matters for owners who want to buy direct from the company behind the enclosure. In turn, fit help and product support come from the same company that makes the cab.

Cab 9550 continues a simple Original Tractor Cab idea: give people who work outside more cover from bad weather.

Protection From Blowing Snow

A two-stage snowblower can move a lot of snow. First, its auger gathers the snow. Then, an impeller sends it through the discharge chute.

Wind can push some of that snow back toward you. So, even a well-aimed chute cannot stop all blowing snow from reaching the operator.

Cab 9550 helps create a barrier between you and that swirling snow. As a result, less direct snow can reach your face and upper body.

Sleet Protection During Winter Work

Winter storms do not always bring soft snow. Sleet may fall while a driveway or walk still needs to be cleared.

Cab 9550 adds cover around the operator. Therefore, the enclosure helps reduce direct contact with falling and wind-driven sleet.

Ice may still form on the clear panel. So, keep the viewing area clean and stop work when ice blocks your view.

Cold Wind Protection

Cold wind can make snow removal much harder. A walk-behind snowblower normally leaves the operator open to air from every direction.

The cab creates a barrier around much of the upper operator area. Thus, direct wind has less contact with your face and body.

Cab 9550 is not insulated or heated. Therefore, always dress for the real outside temperature.

Useful Cover for Long Snow Removal Jobs

A light snowfall may take only a few minutes to clear. Yet a deep storm can mean many passes over the same area.

Long jobs increase your time in snow and cold wind. As a result, weather protection can become more useful as the storm gets worse.

Cab 9550 cannot change the weather. Still, it can help keep more of that weather away from the operator.

Keep the Discharge Area in View

A snowblower can throw snow and hidden objects away from the machine. So, always know where the chute points.

The clear cab panel helps you see the work area. However, good visibility does not replace careful operation.

Never aim the chute toward a person, pet, vehicle, window, or other object that may be hurt or damaged.

Never Clear a Clogged Chute With Your Hands

A blocked snowblower can still contain stored force. Therefore, never place a hand inside the discharge chute or auger housing.

Stop the engine and wait for all moving parts to stop. Then, use the approved chute-clearing method in the MTD operator manual.

The cab does not change this rule. Always treat the auger and impeller as serious hazards.

Keep the Cab Clear of Hot Engine Parts

Gas engines create heat during use. Exhaust parts can become very hot. Therefore, cab material must stay clear of the engine and muffler.

Never bend or change the frame in a way that moves vinyl toward a hot part. Also, stop using the cab if heat begins to damage the enclosure.

Inspect the machine before each storm. Proper clearance helps protect both the cab and the operator.

Use the Snowblower Outdoors

A gas snowblower gives off exhaust. That exhaust contains carbon monoxide, which can cause serious injury or death.

Therefore, never run the snowblower inside a closed garage, shed, trailer, or other enclosed area. Always use the machine outdoors with good airflow.

Stop the engine at once if exhaust collects around the operator or cab.

How to Find Your MTD Snowblower Model Number

MTD model numbers are important because one brand can cover many different machine designs. A model number helps identify the correct parts, manual, and cab fit.

MTD states that most two-stage snow throwers have the model and serial number tag on the bottom of the main gear housing. This part is often called the belly pan or service access plate.

Record both the model and serial number before you shop for a cab. Then, keep the numbers with the snowblower manual for future service.

MTD Snow Thrower Model Number Prefix

MTD uses model numbers to help identify equipment type. In its support data, MTD lists 31 as the common first two characters for a snow thrower model.

Older machines may use a different model-number format. Therefore, never change or shorten the number when you ask about fit.

Use the complete number from the machine tag whenever possible.

Why Buy MTD Snowblower Cab 9550 Direct?

Older snowblowers can be hard to identify from a photo alone. Model numbers and machine layout matter much more than paint color.

Buying direct gives you access to the company that makes Cab 9550. Therefore, you have a direct source for product information and fit questions.

Start with the Original Tractor Cab Cub Cadet collection to see compatible Cub Cadet weather products.

You can also use the Original Tractor Cab installation manuals for current product instructions.

Need help with your exact snowblower? Visit the Original Tractor Cab contact page before you order.

For replacement and related products, browse Original Tractor Cab accessories .

MTD Two-Stage Snowblower Specifications and Machine Design

MTD has made many two-stage walk-behind snowblowers. Therefore, Cab 9550 does not fit one single machine with one fixed engine size, clearing width, weight, or feature list.

Specifications vary by model and year. Engine size, starter type, clearing width, forward speeds, reverse speeds, tires, chute controls, and hand controls can all differ.

For that reason, always use the full model and serial number when you need exact machine data.

How an MTD Two-Stage Snowblower Works

A two-stage snowblower moves snow in two main steps. First, the front auger gathers snow and feeds it toward the center.

Next, an impeller moves the snow up and out through the discharge chute. This second stage helps the machine move deeper and heavier snow.

Both parts move with great force. Therefore, keep hands, feet, clothing, and tools away from the auger and impeller whenever the machine can move.

MTD Gas Engines

Many MTD two-stage snowblowers use four-cycle gas engines. However, engine size varies by model and year.

MTD now uses engine displacement as a main way to state engine size and power capacity. So, owners may see engine size shown in cubic centimeters rather than a simple horsepower number.

Always use the engine model number when buying engine parts. The snowblower model number alone may not give all engine service data.

Self-Propelled Drive

Many MTD two-stage snowblowers are self-propelled. That means the drive system helps move the machine while the operator walks behind it.

A self-propelled design can make deep snow easier to handle. However, travel speed must still match the snow and surface conditions.

Slow down in deep snow, near a building, or when traction is poor.

Friction Wheel Drive on Many MTD Snowblowers

MTD has used friction wheel drive systems on many self-propelled snow throwers. This system changes wheel speed and direction through the position of a rubber-coated friction wheel against a drive plate.

Moving the friction wheel across the drive plate changes travel speed. Meanwhile, moving it across the center changes the direction of wheel travel.

Exact adjustment differs by machine. Therefore, follow the operator or service manual for your model.

Forward and Reverse Travel Speeds

Many MTD two-stage machines offer more than one forward and reverse speed. Yet the exact number varies by model.

Slow forward travel can help the auger process deep or wet snow. In contrast, a faster speed may work well in lighter snow.

Never choose speed only to finish faster. Instead, use a pace that lets the machine clear snow without losing control.

Clearing Width Varies by Model

MTD has sold two-stage snowblowers in several clearing widths. Therefore, width alone cannot identify whether Cab 9550 fits.

The clearing width is measured across the front auger housing. A wider machine can clear more snow in one pass, but it can also use a different handle and control layout.

Use the full machine model number when checking cab fit.

Chute Control Varies by Machine

The discharge chute lets the operator choose where the snow goes. MTD machines have used several chute control designs through the years.

Some models use manual controls. Others may use more advanced chute systems. Therefore, the cab must leave the machine's controls free to move.

Never install Cab 9550 if a frame part blocks or limits a chute control.

Electric Start on Some MTD Models

Some MTD snowblowers include electric starting systems. Other models rely on a recoil starter or use both methods.

Starting equipment varies by machine and engine. So, check the exact operator manual before service or use.

Cab 9550 must never block access to a safe starting control.

Heated Hand Grips on Some Models

Certain MTD-family snowblowers include heated hand grips. These can add comfort during long winter jobs.

However, heated grips are not found on every machine. Likewise, their wiring and controls can differ.

Make sure the Cab 9550 frame does not pinch wiring or block a hand control.

MTD Wheel-Drive Snowblowers

Many MTD two-stage snowblowers move on pneumatic or similar drive tires. Tire size and tread vary with model.

Good tread helps on packed snow. Still, ice can reduce grip even with a strong tire.

Keep both hands in the proper operating position and use a safe travel speed.

Model and Serial Numbers Matter for Parts

MTD stresses the value of both model and serial numbers when owners order replacement parts or request service.

That same rule helps with cab fit. Two snowblowers may look much alike but use different handles, controls, or frame parts.

Therefore, record the full machine information before buying Cab 9550.

MTD Operator Manuals

The correct MTD manual gives the best specifications for an older snowblower. It can identify engine data, control setup, service needs, adjustment methods, and safety rules.

Use the official MTD operator manual resource to look for information for your machine.

You can also visit the official MTD product support center for model identification and equipment support.

How to Check MTD Cab 9550 Fit Before You Buy

Start with the model tag on the snowblower. Write down the complete model and serial number.

Next, confirm that the machine is a compatible MTD-family two-stage walk-behind snowblower. Then, inspect the handle and control area for changes made by a previous owner.

Finally, check the exclusions. Newer Cub Cadet 2X and 3X snowblowers with dual LED headlights do not fit Cab 9550.

Do Not Buy by Clearing Width Alone

Two machines can share the same clearing width and still have very different handle systems. Therefore, a 24-inch, 26-inch, or 28-inch width by itself does not prove cab fit.

Controls can also move from one model generation to another. Likewise, lights and handle panels can change.

Always use the exact model number when you check compatibility.

Do Not Force the Cab Onto a Different Machine

A snowblower cab must leave room for every control. It must also stay clear of hot and moving parts.

Therefore, never bend the frame or alter the snowblower to force an incorrect fit. A wrong fit can create a safety hazard.

Stop installation if the enclosure blocks a lever, chute control, starter, light, safety label, or required view.

The History of Original Tractor Cab Company

Original Tractor Cab began in 1939. At that time, Indiana farmer Stanley Williams saw a simple need. He wanted more protection from bad weather while he worked on his tractor.

So, Stanley made a cab for his own use. Other farmers soon saw the new cab and wanted similar weather protection.

Stanley placed a small ad in a farm publication. The reply showed that many farmers shared the same need. As a result, one farm-built cab grew into an American business.

Born From a Real Need on the Farm

The first Original Tractor Cab solved a real problem. Farm work often had to continue through cold, rain, wind, and snow.

Better operator cover could make that work easier. Therefore, Stanley's idea quickly made sense to other farmers.

Practical weather protection became the base of Original Tractor Cab.

Original Tractor Cab During World War II

World War II changed the young company's work. Normal tractor cab production stopped during the war.

Instead, the company used its manufacturing skill to help support the military effort. Workers made packs and other needed goods.

After the war, Original Tractor Cab returned to making products for people who work outdoors.

From Tractor Cabs to Snowblower Cabs

Outdoor equipment changed after the war. Lawn and garden machines became more common, while snow equipment also grew more capable.

The same weather problem still existed. A person behind a snowblower could face snow and wind just as a tractor operator did.

Therefore, Original Tractor Cab expanded into weather enclosures for walk-behind snowblowers. Cab 9550 is part of that long product history.

A Walk-Behind Snowblower Cab Became Part of the Story

Original Tractor Cab did more than adapt its tractor products. The company also developed products for the special needs of snow equipment.

A walk-behind snowblower cab needed to remain light while giving the operator a clear view. So, flexible enclosure material and a steel tube frame became a practical solution.

That basic idea can still be seen in Cab 9550 today.

New Machines Led to New Cab Designs

Tractors, mowers, snowblowers, and utility equipment kept changing. Therefore, Original Tractor Cab continued to add model-fit products.

Its range grew to include hardtop cabs, soft enclosures, snow equipment cabs, sunshades, canopies, and cab accessories.

Each product serves a different machine. Yet the goal stays close to Stanley's first idea: give an outdoor operator more cover from the weather.

Three Generations of American Manufacturing

The Williams family carried Original Tractor Cab forward through three generations. During that time, the company served many new types of outdoor equipment.

American manufacturing remained a key part of the business. Meanwhile, the company stayed connected to its Indiana roots.

Today, Original Tractor Cab remains based in Arlington, Indiana.

Made in the USA Since 1939

More than eight decades have passed since Stanley Williams built his first tractor cab. Machines have changed a great deal since then.

Winter weather has not. Snow still blows, sleet still falls, and cold wind can still make outdoor work hard.

Cab 9550 carries the same practical idea into snow removal: add useful weather cover so an operator can keep working.

Read more on the Original Tractor Cab About Us page .

MTD Two-Stage Snowblower Cab 9550 FAQ

What machines fit Original Tractor Cab 9550?

Cab 9550 is made for compatible MTD two-stage walk-behind snowblowers. Exact fit depends on the snowblower model and machine layout.

Does Cab 9550 fit Cub Cadet snowblowers?

Cab 9550 fits compatible Cub Cadet walk-behind two-stage snowblowers. However, not every Cub Cadet model fits this enclosure.

Does Cab 9550 fit new Cub Cadet 2X models?

Cab 9550 does not fit newer Cub Cadet 2X models equipped with dual LED headlights.

Does Cab 9550 fit new Cub Cadet 3X models?

No. Original Tractor Cab states that Cab 9550 does not fit newer Cub Cadet 3X models with dual LED headlights.

What is the Cab 9550 window material?

Original Tractor Cab uses optically clear, shatter-resistant window material. The large clear area helps preserve visibility during snow removal.

What is the enclosure material?

Cab 9550 uses nylon-reinforced rip-stop vinyl. This flexible material helps form the weather barrier around the operator.

What is the Cab 9550 frame made from?

The cab uses 16-gauge, 1/2-inch steel tube construction. The steel frame supports the clear and vinyl enclosure material.

Is MTD Snowblower Cab 9550 made in the USA?

Yes. Original Tractor Cab lists Cab 9550 as made in the USA.

Does Cab 9550 protect against blowing snow?

Yes. The enclosure helps reduce direct exposure to blowing and swirling snow during normal snowblower use.

Does Cab 9550 protect against cold wind and sleet?

The enclosure helps block direct cold wind and sleet. However, it is not sealed, insulated, or heated.

Where can I find my MTD snowblower model number?

MTD states that the model and serial number tag on most two-stage snow throwers is located on the bottom of the main gear housing, often called the belly pan or service access plate.

Can I clear a clogged chute by hand?

No. Never place your hands inside the discharge chute or auger housing. Stop the engine, wait for all moving parts to stop, and use the approved clearing method in the machine manual.

Can I use a gas snowblower with Cab 9550 inside a garage?

No. Never operate a gasoline snowblower in a closed garage, shed, trailer, or other enclosed space. Engine exhaust contains dangerous carbon monoxide.

Does Cab 9550 protect against thrown objects?

No. Cab 9550 is a foul-weather enclosure. It is not an impact guard or debris shield.

Is Cab 9550 a genuine MTD or Cub Cadet OEM product?

No. Original Tractor Cab Co., Inc. makes Cab 9550 as an aftermarket weather enclosure for compatible machines.

Non-OEM and Liability Disclaimer

This is an aftermarket product produced by Original Tractor Cab Co., Inc. It is not a genuine MTD or Cub Cadet OEM item. MTD, Cub Cadet, related logos, trademarks, and model names remain the property of their respective owners. Brand and model references on this page are used only to identify intended product fit.

Cab 9550 is designed to provide foul-weather protection only. It can help reduce direct exposure to normal blowing snow, sleet, and wind. The enclosure is not sealed, insulated, or heated.

This product will only help protect from weather elements, not impact or debris. Cab 9550 is not a safety enclosure, impact guard, debris shield, or operator-restraint system.

The cab will not protect the operator from moving augers, impellers, thrown objects, flying debris, collisions, engine exhaust, carbon monoxide, hot surfaces, fire, chemicals, noise, or other hazards.

Always follow the snowblower manufacturer's operator manual and the current Original Tractor Cab installation instructions. Keep every factory guard, shield, safety control, warning label, chute-clearing device, and other safety feature in place and in proper working condition.

Never cut, drill, weld, bend, remove, bypass, or alter a factory safety device to make Cab 9550 fit. Stop installation if any cab part interferes with a drive lever, auger lever, chute control, starter, light, operator position, safety label, or required field of view.

The owner and operator must confirm correct product fit before installation and use. Replacement handles, controls, lights, engines, tires, and owner or dealer changes may affect cab fit and clearance.

Cab 9550 does not fit newer Cub Cadet 2X and 3X models equipped with dual LED headlights. Never force this enclosure onto a snowblower for which it was not designed.

Never place hands or feet inside the auger housing or discharge chute. Stop the engine, wait for all moving parts to stop, and follow the machine maker's approved chute-clearing procedure before removing an obstruction.

Keep cab material away from hot engine and exhaust parts. Stop using the cab if heat, exhaust, controls, or moving machine parts contact the enclosure.

Never operate a gasoline snowblower in a confined area. Engine exhaust contains carbon monoxide, which can cause serious injury or death. Operate the machine outdoors with good ventilation.

California Proposition 65 Warning

WARNING: Cancer and Reproductive Harm — www.P65Warnings.ca.gov.

This product, snowblower components, gasoline engine exhaust, fuels, oils, plastics, vinyl materials, metals, and related equipment may expose users to chemicals known to the State of California to cause cancer, birth defects, or other reproductive harm. Follow all product and equipment safety instructions. Also, provide proper ventilation, wash hands after handling applicable materials, and avoid unnecessary exposure.